[1] A. Valera-Medina, A. Giles, D. Pugh, S. Morris, M. Pohl, and A. Ortwein. Investigation of combustion of emulated biogas in a gas turbine test rig. Journal of Thermal Science, 27:331–340, 2018. doi: 10.1007/s11630-018-1024-1.
[2] K. Tanaka and I. Ushiyama. Thermodynamic performance analysis of gas turbine power plants with intercooler: 1st report, Theory of intercooling and performance of intercooling type gas turbine. Bulletin of JSME, 13(64):1210–1231, 1970. doi: 10.1299/jsme1958.13.1210.
[3] H.M. Kwon, T.S. Kim, J.L. Sohn, and D.W. Kang. Performance improvement of gas turbine combined cycle power plant by dual cooling of the inlet air and turbine coolant using an absorption chiller. Energy, 163:1050–1061, 2018. doi: 10.1016/j.energy.2018.08.191.
[4] A.T. Baheta and S.I.-U.-H. Gilani. The effect of ambient temperature on a gas turbine performance in part load operation. AIP Conference Proceedings, 1440:889–893, 2012. doi: 10.1063/1.4704300.
[5] F.R. Pance Arrieta and E.E. Silva Lora. Influence of ambient temperature on combined-cycle power-plant performance. Applied Energy, 80(3):261–272, 2005. doi: 10.1016/j.apenergy.2004.04.007.
[6] M. Ameri and P. Ahmadi. The study of ambient temperature effects on exergy losses of a heat recovery steam generator. In: Cen, K., Chi, Y., Wang, F. (eds) Challenges of Power Engineering and Environment. Springer, Berlin, Heidelberg, 2007. doi: 10.1007/978-3-540-76694-0_9.
[7] M.A.A. Alfellag: Parametric investigation of a modified gas turbine power plant. Thermal Science and Engineering Progress, 3:141–149, 2017. doi: 10.1016/j.tsep.2017.07.004.
[8] J.H. Horlock and W.A. Woods. Determination of the optimum performance of gas turbines. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 214:243–255, 2000. doi: 10.1243/0954406001522930.
[9] L. Battisti, R. Fedrizzi, and G. Cerri. Novel technology for gas turbine blade effusion cooling. In: Proceedings of the ASME Turbo Expo 2006: Power for Land, Sea, and Air. Volume 3: Heat Transfer, Parts A and B. pages 491–501. Barcelona, Spain. May 8–11, 2006. doi: 10.1115/GT2006-90516.
[10] F.J. Wang and J.S. Chiou. Integration of steam injection and inlet air cooling for a gas turbine generation system. Energy Conversion and Management, 45(1):15–26, 2004. doi: 10.1016/S0196-8904 (03)00125-0.
[11] Z. Wang. 1.23 Energy and air pollution. In I. Dincer (ed.): Comprehensive Energy Systems, pp. 909–949. Elsevier, 2018. doi: 10.1016/B978-0-12-809597-3.00127-9.
[12] Z. Khorshidi, N.H. Florin, M.T. Ho, and D.E. Wiley. Techno-economic evaluation of co-firing biomass gas with natural gas in existing NGCC plants with and without CO$_2$ capture. International Journal of Greenhouse Gas Control, 49:343–363, 2016. doi: 10.1016/j.ijggc.2016.03.007.
[13] K. Mohammadi, M. Saghafifar, and J.G. McGowan. Thermo-economic evaluation of modifications to a gas power plant with an air bottoming combined cycle. Energy Conversion and Management, 172:619–644, 2018. doi: 10.1016/j.enconman.2018.07.038.
[14] S. Mohtaram, J. Lin, W. Chen, and M.A. Nikbakht. Evaluating the effect of ammonia-water dilution pressure and its density on thermodynamic performance of combined cycles by the energy-exergy analysis approach. Mechanika, 23(2):18110, 2017. doi: 10.5755/j01.mech.23.2.18110.
[15] M. Maheshwari and O. Singh. Comparative evaluation of different combined cycle configurations having simple gas turbine, steam turbine and ammonia water turbine. Energy, 168:1217–1236, 2019. doi: 10.1016/j.energy.2018.12.008.
[16] A. Khaliq and S.C. Kaushik. Second-law based thermodynamic analysis of Brayton/Rankine combined power cycle with reheat. Applied Energy, 78(2):179–197, 2004. doi: 10.1016/j.apenergy.2003.08.002.
[17] M. Aliyu, A.B. AlQudaihi, S.A.M. Said, and M.A. Habib. Energy, exergy and parametric analysis of a combined cycle power plant. Thermal Science and Engineering Progress. 15:100450, 2020. doi: 10.1016/j.tsep.2019.100450.
[18] M.N. Khan, T.A. Alkanhal, J. Majdoubi, and I. Tlili. Performance enhancement of regenerative gas turbine: air bottoming combined cycle using bypass valve and heat exchanger—energy and exergy analysis. Journal of Thermal Analysis and Calorimetry. 144:821–834, 2021. doi: 10.1007/s10973-020-09550-w.
[19] F. Rueda Martínez, A. Rueda Martínez, A. Toleda Velazquez, P. Quinto Diez, G. Tolentino Eslava, and J. Abugaber Francis. Evaluation of the gas turbine inlet temperature with relation to the excess air. Energy and Power Engineering, 3(4):517–524, 2011. doi: 10.4236/epe.2011.34063.
[20] A.K. Mohapatra and R. Sanjay. Exergetic evaluation of gas-turbine based combined cycle system with vapor absorption inlet cooling. Applied Thermal Engineering, 136:431–443, 2018. doi: 10.1016/j.applthermaleng.2018.03.023.
[21] A.A. Alsairafi. Effects of ambient conditions on the thermodynamic performance of hybrid nuclear-combined cycle power plant. International Journal of Energy Research, 37(3):211–227, 2013. doi: 10.1002/er.1901.
[22] A.K. Tiwari, M.M. Hasan, and M. Islam. Effect of ambient temperature on the performance of a combined cycle power plant. Transactions of the Canadian Society for Mechanical Engineering, 37(4):1177–1188, 2013. doi: 10.1139/tcsme-2013-0099.
[23] T.K. Ibrahim, M.M. Rahman, and A.N. Abdalla. Gas turbine configuration for improving the performance of combined cycle power plant. Procedia Engineering, 15:4216–4223, 2011. doi: 10.1016/j.proeng.2011.08.791.
[24] M.N. Khan and I. Tlili. New advancement of high performance for a combined cycle power plant: Thermodynamic analysis. Case Studies in Thermal Engineering. 12:166–175, 2018. doi: 10.1016/j.csite.2018.04.001.
[25] S.Y. Ebaid and Q.Z. Al-hamdan. Thermodynamic analysis of different configurations of combined cycle power plants. Mechanical Engineering Research. 5(2):89–113, 2015. doi: 10.5539/mer.v5n2p89.
[26] R. Teflissi and A. Ataei. Effect of temperature and gas flow on the efficiency of an air bottoming cycle. Journal of Renewable and Sustainable Energy, 5(2):021409, 2013. doi: 10.1063/1.4798486.
[27] A.A. Bazmi, G. Zahedi, and H. Hashim. Design of decentralized biopower generation and distribution system for developing countries. Journal of Cleaner Production, 86:209–220, 2015. doi: 10.1016/j.jclepro.2014.08.084.
[28] A.I. Chatzimouratidis and P.A. Pilavachi. Decision support systems for power plants impact on the living standard. Energy Conversion and Management, 64:182–198, 2012. doi: 10.1016/j.enconman.2012.05.006.
[29] T.K. Ibrahim, F. Basrawi, O.I. Awad, A.N. Abdullah, G. Najafi, R. Mamat, and F.Y. Hagos. Thermal performance of gas turbine power plant based on exergy analysis. Applied Thermal Engineering, 115:977–985, 2017. doi: 10.1016/j.applthermaleng.2017.01.032.
[30] M. Ghazikhani, I. Khazaee, and E. Abdekhodaie. Exergy analysis of gas turbine with air bottoming cycle. Energy, 72:599–607, 2014. doi: 10.1016/j.energy.2014.05.085.
[31] M.N. Khan, I. Tlili, and W.A. Khan. thermodynamic optimization of new combined gas/steam power cycles with HRSG and heat exchanger. Arabian Journal for Science and Engineering, 42:4547–4558, 2017. doi: 10.1007/s13369-017-2549-4.
[32] N. Abdelhafidi, İ.H. Yılmaz, and N.E.I. Bachari. An innovative dynamic model for an integrated solar combined cycle power plant under off-design conditions. Energy Conversion and Management, 220:113066, 2020. doi: 10.1016/j.enconman.2020.113066.
[33] T.K. Ibrahim, M.K. Mohammed, O.I. Awad, M.M. Rahman, G. Najafi, F. Basrawi, A.N. Abd Alla, and R. Mamat. The optimum performance of the combined cycle power plant: A comprehensive review. Renewable and Sustainable Energy Reviews, 79:459–474, 2017. doi: 10.1016/j.rser.2017.05.060.
[34] M.N. Khan. Energy and exergy analyses of regenerative gas turbine air-bottoming combined cycle: optimum performance. Arabian Journal for Science and Engineering, 45:5895–5905, 2020. doi: 10.1007/s13369-020-04600-9.
[35] A.M. Alklaibi, M.N. Khan, and W.A. Khan. Thermodynamic analysis of gas turbine with air bottoming cycle. Energy, 107:603–611, 2016. doi: 10.1016/j.energy.2016.04.055.
[36] M. Ghazikhani, M. Passandideh-Fard, and M. Mousavi. Two new high-performance cycles for gas turbine with air bottoming. Energy, 36(1):294–304, 2011. doi: 10.1016/j.energy.2010.10.040.
[37] M.N. Khan and I. Tlili. Innovative thermodynamic parametric investigation of gas and steam bottoming cycles with heat exchanger and heat recovery steam generator: Energy and exergy analysis. Energy Reports, 4:497–506, 2018. doi: 10.1016/j.egyr.2018.07.007.
[38] M.N. Khan and I. Tlili. Performance enhancement of a combined cycle using heat exchanger bypass control: A thermodynamic investigation. Journal of Cleaner Production, 192:443–452, 2018. doi: 10.1016/j.jclepro.2018.04.272.
[39] M. Korobitsyn. Industrial applications of the air bottoming cycle. Energy Conversion and Management, 43(9-12):1311–1322, 2002. doi: 10.1016/S0196-8904(02)00017-1.
[40] T.K. Ibrahim and M.M. Rahman. optimum performance improvements of the combined cycle based on an intercooler–reheated gas turbine. Journal of Energy Resources Technology, 137(6):061601, 2015. doi: 10.1115/1.4030447.

[1] M. Aydogdu. Semi-inverse method for vibration and buckling of axially functionally graded beams. Journal of Reinforced Plastics and Composites, 27(7):683–691, 2008. doi: 10.1177/0731684407081369.
[2] J. Yang and Y. Chen. Free vibration and buckling analyses of functionally graded beams with edge cracks. Composite Structures, 83(1):48–60, 2008. doi: 10.1016/j.compstruct.2007.03.006.
[3] A. Shahba, R. Attarnejad, M.T. Marvi, and S. Hajilar. Free vibration and stability analysis of axially functionally graded tapered Timoshenko beams with classic and nonclassical boundary conditions. Composites Part B: Engineering, 42(4):801–808, 2011. doi: 10.1016/j.compositesb.2011.01.017.
[4] A. Shahba and S. Rajasekaran. Free vibration and stability of tapered Euler-Bernoulli beams made of axially functionally graded materials. Applied Mathematical Modelling, 36(7):3094–3111, 2012. doi: 10.1016/j.apm.2011.09.073.
[5] T.K. Nguyen, T.P. Vo, and H.T. Thai. Static and free vibration of axially loaded functionally graded beams based on the first-order shear deformation theory. Composites Part B: Engineering, 55:147–157, 2013. doi: 10.1016/j.compositesb.2013.06.011.
[6] S.R. Li and R.C. Batra. Relations between buckling loads of functionally graded Timoshenko and homogeneous Euler-Bernoulli beams. Composite Structures, 95:5–9, 2013. doi: 10.1016/j.compstruct.2012.07.027.
[7] J. Rychlewska. Buckling analysis of axially functionally graded beams. Journal of Applied Mathematics and Computational Mechanics, 13(4):103–108, 2014.
[8] S.R. Li, X.Wang, and Z.Wan. Classical and homogenized expressions for buckling solutions of functionally graded material Levinson beams. Acta Mechanica Solida Sinica, 28(5):592–604, 2015. doi: 10.1016/S0894-9166(15)30052-5.
[9] M.E. Torki and J.N. Reddy. Buckling of functionally-graded beams with partially delaminated piezoelectric layers. International Journal of Structural Stability and Dynamics, 16(3):1450104, 2016. doi: 10.1142/S0219455414501041.
[10] B. Shvartsman and J. Majak. Numerical method for stability analysis of functionally graded beams on elastic foundation. Applied Mathematical Modelling, 40(5-6):3713–3719, 2016. doi: 10.1016/j.apm.2015.09.060.
[11] Y. Huang, M. Zhang, and H.W. Rong. Buckling analysis of axially functionally graded and nonuniform beams based on Timoshenko theory. Acta Mechanica Solida Sinica, 29(2):200–207, 2016. doi: 10.1016/S0894-9166(16)30108-2.
[12] V. Kahya and M. Turan. Finite element model for vibration and buckling of functionally graded beams based on the first-order shear deformation theory. Composites Part B: Engineering, 109:108–115, 2017. doi: 10.1016/j.compositesb.2016.10.039.
[13] H. Deng, K. Chen, W. Cheng, and S.G. Zhao. Vibration and buckling analysis of doublefunctionally graded Timoshenko beam system on Winkler-Pasternak elastic foundation. Composite Structures, 160:152–168, 2017. doi: 10.1016/j.compstruct.2016.10.027.
[14] V. Kahya and M. Turan. Vibration and stability analysis of functionally graded sandwich beams by a multi-layer finite element. Composites Part B: Engineering, 146:198–212, 2018. doi: 10.1016/j.compositesb.2015.02.032.
[15] Y. Kiani and M.R. Eslami. Thermal buckling analysis of functionally graded materials beams. International Journal of Mechanics and Materials in Design, 6(3):229–238, 2010. doi: 10.1007/s10999-010-9132-4.
[16] N. Wattanasakulpong, B. Gangadhara Prusty, and D.W. Kelly. Thermal buckling and elastic vibration of third-order shear deformable functionally graded beams. International Journal of Mechanical Sciences, 53(9):734–743, 2011. doi: 10.1016/j.ijmecsci.2011.06.005.
[17] A. Fallah and M.M.Aghdam. Thermo-mechanical buckling and nonlinear free vibration analysis of functionally graded beams on nonlinear elastic foundation. Composites Part B: Engineering, 43(3):1523–1530, 2012. doi: 10.1016/j.compositesb.2011.08.041.
[18] Y. Kiani and M.R. Eslami. Thermomechanical buckling of temperature-dependent FGM beams. Latin American Journal of Solids and Structures, 10(2):223–245, 2013. doi: 10.1590/S1679-78252013000200001.
[19] Y. Fu, Y. Chen, and P. Zhang. Thermal buckling analysis of functionally graded beam with longitudinal crack. Meccanica, 48(5):1227–1237, 2013. doi: 10.1007/s11012-012-9663-x.
[20] S.E. Esfahani, Y. Kiani, and M.R. Eslami. Non-linear thermal stability analysis of temperature dependent FGM beams supported on non-linear hardening elastic foundations. International Journal of Mechanical Sciences, 69:10–20, 2013. doi: 10.1016/j.ijmecsci.2013.01.007.
[21] L.C. Trinh, T.P. Vo, H.T. Thai, and T.K. Nguyen. An analytical method for the vibration and buckling of functionally graded beams under mechanical and thermal loads. Composites Part B: Engineering, 100:152–163, 2016. doi: 10.1016/j.compositesb.2016.06.067.
[22] Y. Sun, S.R. Li, and R.C. Batra. Thermal buckling and post-buckling of FGM Timoshenko beams on nonlinear elastic foundation. Journal of Thermal Stresses, 39(1):11–26, 2016. doi: 10.1080/01495739.2015.1120627.
[23] T.K. Nguyen, B.D. Nguyen, T.P. Vo, and H.T. Thai. Hygro-thermal effects on vibration and thermal buckling behaviours of functionally graded beams. Composite Structures, 176:1050–1060, 2017. doi: 10.1016/j.compstruct.2017.06.036.
[24] G.L. She, F.G. Yuan, and Y.R. Ren. Thermal buckling and post-buckling analysis of functionally graded beams based on a general higher-order shear deformation theory. Applied Mathematical Modelling, 47:340–357, 2017. doi: 10.1016/j.apm.2017.03.014.
[25] M. Hosseini, F. Farhatnia, and S. Oveissi. Functionally graded Timoshenko beams with elastically-restrained edge supports: thermal buckling analysis via Stokes’ transformation technique. Research on Engineering Structures and Materials, 4(2):103–125, 2018. doi: 10.17515/resm2016.83me1018.
[26] A. Majumdar and D. Das. A study on thermal buckling load of clamped functionally graded beams under linear and nonlinear thermal gradient across thickness. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 232(9):769–784, 2018. doi: 10.1177/1464420716649213.
[27] Y. Liu, S. Su, H. Huang, and Y. Liang. Thermal-mechanical coupling buckling analysis of porous functionally graded sandwich beams based on physical neutral plane. Composites Part B: Engineering, 168:236–242, 2019. doi: 10.1016/j.compositesb.2018.12.063.
[28] A.C. Ugural. Mechanical Design: An Integrated Approach. McGraw-Hill Company, Singapore, 2004.
[29] W.R. Chen and H. Chang. Closed-form solutions for free vibration frequencies of functionally graded Euler-Bernoulli beams. Mechanics of Composite Materials, 53(1):79–98, 2017. doi: 10.1007/s11029-017-9642-3.
[30] W.R. Chen and H. Chang. Vibration analysis of functionally graded Timoshenko beams. International Journal of Structural Stability and Dynamics, 18(1):1850007, 2018. doi: 10.1142/S0219455418500074.
[31] Y.S. Touloukian. Thermophysical Properties of High Temperature Solids Materials. MacMillan, New York, 1967.
[32] J.N. Reddy and C.D. Chin. Thermomechanical analysis of functionally graded cylinders and plates. Journal of Thermal Stresses, 21(6):593–626, 1998. doi: 10.1080/01495739808956165.

[1] C.T. Loy, K.Y. Lam, and J.N. Reddy. Vibration of functionally graded cylindrical shells. International Journal of Mechanical Sciences, 41(3):309–324, 1999. doi: 10.1016/S0020-7403(98)00054-X .
[2] B.V. Sankar. An elasticity solution for functionally graded beams. Composites Science and Technology, 61(5):689–696, 2001. doi: 10.1016/S0266-3538(01)00007-0.
[3] M. Aydogdu and V. Taskin. Free vibration analysis of functionally graded beams with simply supported edges. Materials & Design, 28(5):1651–1656, 2007. doi: 10.1016/j.matdes.2006.02.007.
[4] A. Chakraborty, S. Gopalakrishnan, and J.N. Reddy, A new beam finite element for the analysis of functionally graded materials. International Journal of Mechanical Sciences, 45(3):519–539, 2003. doi: 10.1016/S0020-7403(03)00058-4.
[5] A.J. Goupee and S.S. Vel. Optimization of natural frequencies of bidirectional functionally graded beams. Structural and Multidisciplinary Optimization, 32:473–484, 2006. doi: 10.1007/s00158-006-0022-1.
[6] H.J. Xiang and J. Yang. Free and forced vibration of a laminated FGM Timoshenko beam of variable thickness under heat conduction. Composites Part B:Engineering, 39(2):292–303, 2008. doi: 10.1016/j.compositesb.2007.01.005.
[7] M.T. Piovan and R. Sampaio. A study on the dynamics of rotating beams with functionally graded properties. Journal of Sound and Vibration, 327(1-2):134–143, 2009. doi: 10.1016/j.jsv.2009.06.015.
[8] M Şimşek and T. Kocatürk. Free and forced vibration of a functionally graded beam subjected to a concentrated moving harmonic load. Composite Structures, 90(4):465–473, 2009. doi: 10.1016/j.compstruct.2009.04.024.
[9] P. Malekzadeh, M.R. Golbahar Haghighi, and M.M. Atashi. Out-of-plane free vibration of functionally graded circular curved beams in thermal environment. Composite Structures, 92: 541–552, 2010. doi: 10.1016/j.compstruct.2009.08.040.
[10] Y. Huang and X.F. Li. A new approach for free vibration of axially functionally graded beams with non-uniform cross-section. Journal of Sound and Vibration, 329(11):2291–2303, 2010. doi: 10.1016/j.jsv.2009.12.029.
[11] A. Shahba, R. Attarnejad, M.T. Marvi, and S. Hajilar. Free vibration and stability analysis of axially functionally graded tapered Timoshenko beams with classical and non-classical boundary conditions. Composites Part B: Engineering, 42(4):801–808, 2011. doi: 10.1016/j.compositesb.2011.01.017.
[12] I. Elishakoff and Y. Miglis. Some intriguing results pertaining to functionally graded columns. Journal of Applied Mechanics, 80(4):1021–1029, 2013. doi: 10.1115/1.4007983.
[13] M. Soltani and B. Asgarian. New hybrid approach for free vibration and stability analyses of axially functionally graded Euler-Bernoulli beams with variable cross-section resting on uniform Winkler-Pasternak foundation. Latin American Journal of Solids and Structures, 16(3):e173, 2019. doi: 10.1590/1679-78254665.
[14] J.H. Kim and G.H. Paulino. Isoparametric graded finite elements for nonhomogeneous isotropic and orthotropic materials. Journal of Applied Mechanics, 69(4):502–514, 2002. doi: 10.1115/1.1467094.
[15] P. Zahedinejad, C. Zhang, H. Zhang, and S. Ju. A comprehensive review on vibration analysis of functionally graded beams. International Journal of Structural Stability and Dynamics, 20(4):2030002, 2020. doi: 10.1142/S0219455420300025.
[16] N. Zhang, T. Khan, H. Guo, S. Shi, W. Zhong, and W. Zhang. Functionally graded materials: An overview of stability, buckling, and free vibration analysis. Advances in Material Science and Engineering, 1354150, 2019. doi: 10.1155/2019/1354150.
[17] Ö. Özdemir. Application of the differential transform method to the free vibration analysis of functionally graded Timoshenko beams. Journal of Theoretical and Applied Mechanics, 54(4):1205–1217, 2016.
[18] B. Kılıç. Vibration analysis of axially functionally graded rotor blades. M.Sc.Thesis, Istanbul Technical University, İstanbul, Turkey, 2019.
[19] S. Rajasekaran. Differential transformation and differential quadrature methods for centrifugally stiffened axially functionally graded tapered beams. International Journal of Mechanical Sciences, 74. 15-31, 2013.
[20] A.D. Wright, C.E. Smith, R.W. Thresher, and J.L.C. Wang. Vibration modes of centrifugally stiffened beams. Journal of Applied Mechanics, 49(1):197–202, 1982. doi: 10.1115/1.3161966.

[1] S. Gross and E.W. Abel. A finite element analysis of hollow stemmed hip prostheses as a means of reducing stress shielding of the femur. Journal of Biomechanics, 34(8):995–1003, 2001. doi: 10.1016/s0021-9290(01)00072-0.
[2] D. Lin, Q. Li, W. Li, S. Zhou, and M.V. Swain. Design optimization of functionally graded dental implant for bone remodeling. Composites Part B: Engineering, 40(7):668–675, 2009. doi: 10.1016/j.compositesb.2009.04.015.
[3] G. Jin, M. Takeuchi, S. Honda, T. Nishikawa, and H. Awaji. Properties of multilayered mullite/Mo functionally graded materials fabricated by powder metallurgy processing. Materials Chemistry and Physics, 89(2-3):238–243, 2005. doi: 10.1016/j.matchemphys.2004.03.031.
[4] E. Yılmaz, A. Gökçe, F. Findik, H.O. Gulsoy, and O. İyibilgin. Mechanical properties and electrochemical behavior of porous Ti-Nb biomaterials. Journal of the Mechanical Behavior of Biomedical Materials, 87:59–67, 2018. doi: 10.1016/j.jmbbm.2018.07.018.
[5] A.T. Şensoy. M. Çolak, I. Kaymaz, and F. Findik. Optimal material selection for total hip implant: a finite element case study. Arabian Journal for Science and Engineering, 44:10293--10301, 2019. doi: 10.1007/s13369-019-04088-y.
[6] T.A. Enab and N.E. Bondok. Material selection in the design of the tibia tray component of cemented artificial knee using finite element method. Materials and Design, 44:454–460, 2013. doi: 10.1016/j.matdes.2012.08.017.
[7] H. Weinans, R.Huiskes, and H.J. Grootenboer. The behavior of adaptive bone-remodeling simulation models. Journal of Biomechanics, 25(12):1425–1441, 1992. doi: 10.1016/0021-9290(92)90056-7.
[8] J.A. Simões and A.T. Marques. Design of a composite hip femoral prosthesis. Materials & Design, 26(5):391–401, 2005. doi: 10.1016/j.matdes.2004.07.024.
[9] S. Tyagi and S.K. Panigrahi. Transient analysis of ball bearing fault simulation using finite element method. Journal of The Institution of Engineers (India): Series C, 95:309–318, 2014. doi: 10.1007/s40032-014-0129-x.
[10] I.S. Jalham. Computer-aided quality function deployment method for material selection. International Journal of Computer Applications in Technology, 26((4):190–196, 2006. doi: 10.1504/IJCAT.2006.010764.
[11] E. Karana, P. Hekkert, and P. Kandachar. Material considerations in product design: A survey on crucial material aspects used by product designers. Materials & Design, 29(6):1081–1089, 2008. doi: 10.1016/j.matdes.2007.06.002.
[12] M.F. Ashby. Materials Selection in Mechanical Design. Butterworth-Heinemann, Oxford, 1995.
[13] C. Vezzoli and E. Manzini. Environmental complexity and designing activity. In: Design for Environmental Sustainability, pages 215–217. Springer, London, 2008. doi: 10.1007/978-1-84800-163-3_11.
[14] M. Kutz. Handbook of Materials Selection. John Wiley & Sons, New York, 2002.
[15] R.V. Rao and B.K. Patel. A subjective and objective integrated multiple attribute decision making method for material selection. Materials & Design, 31(10):4738–4747, 2010. doi: 10.1016/j.matdes.2010.05.014.
[16] X.F. Zha. A web-based advisory system for process and material selection in concurrent product design for a manufacturing environment. The International Journal of Advanced Manufacturing Technology, 25:233–243, 2005. doi: 10.1007/s00170-003-1838-0.
[17] F. Giudice, G. La Rosa, and A. Risitano. Materials selection in the Life-Cycle Design process: a method to integrate mechanical and environmental performances in optimal choice. Materials & Design, 26(1):9–20, 2005. doi: 10.1016/j.matdes.2004.04.006.
[18] F. Findik and K. Turan. Materials selection for lighter wagon design with a weighted property index method. Materials & Design, 37:470–477, 2012. doi: 10.1016/j.matdes.2012.01.016.
[19] M. İpek, İ.H. Selvi, F. Findik, O. Torkul, and I.H. Cedimoğlu. An expert system based material selection approach to manufacturing. Materials & Design, 47:331–340, 2013. doi: 10.1016/j.matdes.2012.11.060.
[20] J.A. Basurto-Hurtado, G.I. Perez-Soto, R.A. Osornio-Rios, A. Dominguez-Gonzalez, and L.A. Morales-Hernandez. A new approach to modeling the ductile cast iron microstructure for a finite element analysis. Arabian Journal for Science and Engineering, 44:1221–1231, 2019. doi: 10.1007/s13369-018-3465-y.
[21] E. Yılmaz, F. Kabataş, A. Gökçe, and F. Fındık. Production and characterization of a bone-like porous Ti/Ti-hydroxyapatite functionally graded material. Journal of Materials Engineering and Performance, 29:6455--6467, 2020. doi: 10.1007/s11665-020-05165-2.
[22] E. Yılmaz, A. Gökçe, F. Findik, and H.Ö. Gulsoy. Assessment of Ti–16Nb– xZr alloys produced via PIM for implant applications. Journal of Thermal Analysis and Calorimetry, 134:7–14, 2018. doi: 10.1007/s10973-017-6808-0.
[23] H.F. El-Sheikh, B.J. MacDonald, and M.S.J. Hashmi. Material selection in the design of the femoral component of cemented total hip replacement. Journal of Materials Processing Technology, 122(2-3):309–317, 2002. doi: 10.1016/S0924-0136(01)01128-1.
[24] T.S. Rubak, S.W. Svendsen, K. Søballe, and P. Frost. Total hip replacement due to primary osteoarthritis in relation to cumulative occupational exposures and lifestyle factors: a nationwide nested case–control study. Arthritis Care & Research, 66(10):1496–1505. doi: 10.1002/acr.22326.
[25] İ. Çelik and H. Eroğlu. Selection application of material to be used in hip prosthesis production with analytic hierarchy process. Materials Science & Engineering Technology, 48(11):1125–1132, 2017. doi: 10.1002/mawe.201700046.
[26] A. Aherwar, A. Patnaik, M. Bahraminasab, and A. Singh. Preliminary evaluations on development of new materials for hip joint femoral head. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 233(5):885–899, 2019. doi: 10.1177/1464420717714495.
[27] A. Hafezalkotob and A. Hafezalkotob. Comprehensive MULTIMOORA method with target-based attributes and integrated significant coefficients for materials selection in biomedical applications. Materials & Design, 87:949–959, 2015. doi: 10.1016/j.matdes.2015.08.087.
[28] G. Bergmann, G. Deuretzbacher, M. Heller, F. Graichen, A. Rohlmann, J. Strauss, anf G.N. Duda. Hip contact forces and gait patterns from routine activities. Journal of Biomechanics, 34(7):859–871, 2001. doi: 10.1016/s0021-9290(01)00040-9.
[29] A.Z. Şenalp, O. Kayabasi, and H. Kurtaran. Static, dynamic and fatigue behavior of newly designed stem shapes for hip prosthesis using finite element analysis. Materials and Design, 28(5):1577–1583, 2007. doi: 10.1016/j.matdes.2006.02.015.