In a dynamic machining process, distortion in surface irregularity is a very complex phenomenon. Surface irregularities form a periodic representation of the tool profile with various kinds of disturbance in a broad range of changes in the height and length of the profile. To discern these irregularity disturbances, interactions of the tool in the form of changes perpendicular and parallel relative to the workpiece were analyzed and simulated. The individual kinds of displacement of the tool relative to the workpiece introduce distortions in the changes of height and length. These changes are weakly represented in standard height and length irregularity parameters and their discernment has been found through amplitude-frequency functions.
The paper presents a spectral formulation of surface profile irregularity in a wideband frequency range for roughness, waviness and shape components along the measured length. A unique distribution of roughness and waviness components is proposed, according to the nature of their origination in the course of machining with tools of defined cutting edge, as distinct from standard filtration in measurements of surface irregularities. Differences resulting from both formulations are outlined as well as the method of determining the frequency of component separation for surface roughness and waviness.
The paper describes the influence of the machining operation on a surface, which disturbs the projection of the tool profile in the form of its relative movements with respect to the object. The elements of the machine tool undergo constant wear during the machining process, it is therefore important to recognize the effects of their influence on the surface's irregularities. Amplitude-frequency analysis of lateral profiles has been used to evaluate and changes of turned lateral profiles. The results of simulation of radial and axial effects of the machine tool on surface and their spectral components were analyzed. Surfaces obtained in similar machining conditions on lathes operated in various time periods were analyzed spectrally. From the analysis of surface irregularity changes caused by disturbances in movements of the tool against the object, testifying the wear of main machine elements during its operation, the modulated, amplitude-frequency character of changes in surface irregularities of workpiece can be noticed.
Lublin Upland and Roztocze region are known for the occurrence of a large number of springs of high yield. These springs are fed mainly from Cretaceous or Tertiary water-bearing horizon. In order to determine variability of springs’ yield, 61 selected springs were analysed in spring periods of the years 1998–2008. Collected hydrometric materials allowed for comparing average and extreme yield values of springs in various physiographic regions within the period of 11 years. Average value was 76.1 dm3·s–1, while the mean of the minimal yields was 44.7 dm3·s–1 and of the maximal – 132.7 dm3·s–1. Coefficient of irregularity of the springs’ yield ranged from 1.5 to 5.0, which may lead to the conclusion that the springs’ yield is constant or varies slightly. In some cases the irregularity was higher but it was determined by hydrogeological, meteorological and local factors.
In this paper we discuss the linear quadratic (LQ) optimization problem subject to fractional order irregular singular systems. The aim of this paper is to find the control-state pairs satisfying the dynamic constraint of the form a fractional order irregular singular systems such that the LQ objective functional is minimized. The method of solving is to convert such LQ optimization into the standard fractional LQ optimization problem. Under some particularly conditions we find the solution of the problem under consideration.
Salt caverns are used for over 70 years to store power sources and dispose of industrial wastes. The design of cavern shape and dimensions is still considered as a difficult engineering problem despite progress in geotechnical, construction and exploration methods. The rational design of cavern depends on mechanical parameters of rock salt and nonsalt rocks, stability conditions, safety requirements and stored material. However, most of these factors are related to geological factors like depth of cavern location, the geological structure of salt deposit, lithology of interlayers, petrology and mineralogy of rock salt and interlayers. The significant diversity in the geological conditions of different rock salt deposits contributed to the variety in shape and dimensions of salt caverns worldwide.
In this paper, the examples of caverns developed in various salt deposits are presented. The shape of these caverns and its relation to geological features is presented. The influence of geological factors on the formation of irregularities in a cavern shape is described. Moreover, the evaluation of storage caverns located in Polish salt deposits in a view of the aforementioned geological factors is performed. The information and analysis described in this paper provide input which can be useful in future plans connected with the development of underground storage in Poland.
The Return Directive allows for the detention of minors during removal proceedings, but only as a ‘last resort’, for ‘the shortest appropriate period of time’ and with the primary consideration of the ‘best interests of the child’. While the Directive attempted to provide some safeguards to minors, these are undermined throughout, as the enforcement of such provisions depends significantly on their incorpo-ration into domestic law. I provide an overview of the EU detention policy, map the existing domestic law framework in light of the benchmarks set out by the Directive and human rights instruments, and argue that there is a lack of consistency in the case study of Poland. In doing so, I analyse the limitations to detaining minors in light of the human rights treaties, of the jurisprudence of the Court of Justice of the European Union and the European Court of Human Rights, and of the role of the monitoring body – the Committee on the Rights of the Child. In discussing the different types of jurisprudence, I illustrate how different bodies speak with the same voice on the detention of minors. Based on these findings I attempt to contribute to the policy debate on how to reconcile and balance the implications of two policy objectives affecting irregular migrant children - the protection of minors and immigration en-forcement. I identify detention policy aspects, for which the legislation should be further harmonised, and I develop models of good practices based on other Member States’ practices, thus providing a set of policy recommendations to the Polish legislator as to what fair and effective irregular migration governance might entail.
Adaptive locomotion over difficult or irregular terrain is considered as a superiority feature of walking robots over wheeled or tracked machines. However, safe foot positioning, body posture and stability, correct leg trajectory, and efficient path planning are a necessity for legged robots to overcome a variety of possible terrains and obstacles.Without these properties, anywalking machine becomes useless. Energy consumption is one of the major problems for robots with a large number of Degrees of Freedom (DoF). When considering a path plan ormovement parameters such as speed, step length or step height, it is important to choose the most suitable variables to sustain long battery life and to reach the objective or complete the task successfully.We change the settings of a hexapod robot leg trajectory for overcoming small terrain irregularities by optimizing consumed energy and leg trajectory during each leg transfer. The trajectory settings are implemented as a part of hexapod robot simulation model and tested through series of experiments with various terrains of differing complexity and obstacles of various sizes. Our results show that the proposed energy-efficient trajectory transformation is an effective method for minimizing energy consumption and improving overall performance of a walking robot.
The (Zn) – single crystal strengthened by the E = (Zn) + Zn16Ti eutectic precipitate is subjected to directional growth by the Bridgman’s system and current analysis. Experimentally, the strengthening layers (stripes) are generated periodically in the (Zn) – single crystal as a result of the cyclical course of precipitation which accompanies the directional solidification. These layers evince diversified eutectic morphologies like irregular rods, regular lamellae, and regular rods. The L – shape rods of the Zn16Ti – intermetallic compound appear within the first range of the growth rates when the irregular eutectic structure is formed. Next, the branched rods transform into regular rods and subsequently the regular rods into regular lamellae transitions can be recorded. The regular lamellae exist only within a certain range of growth rates. Finally, the regular rods re-appear at some elevated growth rates.
A new solution to the diffusion equation is provided to describe the micro-field of the solute concentration in the liquid adjacent to the front of the growing eutectic structure. The solution is based on the mass balance in the considered system. Moreover, the existence of the protrusion of the leading eutectic phase over the wetting one is required by the mass balance. The appearance of the d – protrusion in the growing eutectic is well confirmed by the experimental observations of the frozen solid/liquid interface. The mentioned solution satisfies the concept of the eutectic coupled growth according to which undercooling of the leading phase is less than undercooling of the wetting eutectic phase. Also, the Ti – solute micro-segregation / redistribution is analyzed within the matrix of the single crystal. The micro-segregation is described as a result of the solution to the adequate, newly developed differential equation. The definition for the solute redistribution is given by the subsequently / separately formulated relationship. This definition takes into account both extent -, and intensity of the solute redistribution.
Finally, the entropy production is calculated for the regular lamellae -, and for the regular rods formation, respectively. The entropy production is a function of some parameters which define the eutectic phase diagram, coefficient of the diffusion in the liquid, and some capillary parameters connected with the mechanical equilibrium located at the triple point of the solid/liquid interface. Branches formation is related to the marginal stability. A new criterion is formulated and subjected to successful verification. It is: in the structural – thermodynamic competition the winner is this kind of the pattern for which minimum entropy production has a lower value.
The setback is a frequent type of irregularity expected in complex-shaped buildings. The main purpose of the present paper is to emphasize the influence of setback location on the performance of reinforced concrete building structures under seismic excitation. In this research study, 68 building models with setback values vary from 0.1L to 0.5L, located at various levels, are studied. Non-linear static (pushover) analyses were conducted. All building models are analyzed using a finite element calculation code. The outcomes show that setback irregularity location has a significant effect on the seismic behavior of the structure. Based on the regression analysis of the results obtained in the current study, a mathematical formula is proposed to quantify the effect of setback location on the performance of building structures. The results of this study would aid all professionals in the building sector to anticipate the response of these types of structures during the design phase.