In this paper, the influence of impact damage to the induction motors on the zero-sequence voltage and its spectrum is presented. The signals detecting the damages result from a detailed analysis of the formula describing this voltage component which is induced in the stator windings due to core magnetic saturation and the discrete displacement of windings. Its course is affected by the operation of both the stator and the rotor. Other fault detection methods, are known and widely applied by analysing the spectrum of stator currents. The presented method may be a complement to other methods because of the ease of measurements of the zero voltage for star connected motors. Additionally, for converter fed motors the zero sequence voltage eliminates higher time harmonics displaced by 120 degrees. The results of the method application are presented through measurements and explained by the use of a mathematical model of the slip-ring induction motor.

A pulse sequence shaper for the pursuance of the research using a wide spectrum of radiospectroscopy and relaxation methods in NQR is proposed. The distinctive feature of this product is its implementation with the application of a multi-functional programmable frequency synthesizer suitable for high-speed amplitude and phase manipulations.

The paper presents the capabilities of welding techniques to creating properties of wear resistant high chromium cast iron alloy. The use

of the right kind of welding sequence allows you to change the structure and properties of the obtained welds. Tests were conducted for

one type of additive material in the form of self shielded core wire. In order to determine the effect of the type of welding sequence on the

properties of welds performed welding using string bead and weave bead. The resulting weld was tested on hardness and research structure

in an optical microscope. In the following studies have been made erosive tests wear of made hardfacing. String beads gave structure rich

in carbides and harder about 270 HV of the weld with weave bead. Also, wear resistance was nearly twice as better for welds made with

string beads. In the experiment a decisive role in the resistance to wear plays a high hardness of the deposit and the presence of carbides in

its structure. Changes in the basic parameters of the deposition process allows for the formation of structure and properties of hardfacing

welds in a wide range.

This report describes the isolation and characterization of bacterial isolates that produce anti−microbial compounds from one of the South Shetland Islands, King George Is − land, Antarctica. Of a total 2465 bacterial isolates recovered from the soil samples, six (BG5, MTC3, WEK1, WEA1, MA2 and CG21) demonstrated inhibitory effects on the growth of one or more Gram−negative or Gram−positive indicator foodborne pathogens ( i.e. Escherichia coli 0157:H7, Salmonella spp., Klebsiella pneumoniae , Enterobacter cloacae , Vibrio parahaemolyticus and Bacillus cereus ). Upon examination of their 16S rRNA sequences and biochemical profiles, the six Antarctic bacterial isolates were identified as Gram−negative Pedobacter cryoconitis (BG5), Pseudomonas migulae (WEK1), P. corrugata (WEA1) and Pseudomonas spp. (MTC3, MA2, and CG21). While inhibitors produced by strains BG5, MTC3 and CG21 were sensitive to protease treatment, those produced by strains WEK1, WEA1, and MA2 were insensitive to catalase, lipase, a −amylase, and protease enzymes. In addtion, the six Antarctic bacterial isolates appeared to be resistant to multiple antibiotics.

Species of the genus Salsola belong to the family Chenopodiaceae and are associated with large saline areas in eastern Iran. The aim of the study was to isolate and characterize the endophytic and phytopathogenic fungal communities from non-mycotrophic Salsola species. Sampling was done from different parts of Salsola plants in the Birjand region in 2017 and 2018. Isolation and identification of fungal isolates were done using biological characteristics and ITS region sequences. The pathogenicity of the representative isolates was investigated by cultivating disinfected Salsola incanescens seeds under greenhouse conditions and inoculating seedlings with a fungal spore suspension from 7 day old fungal colonies on PDA media. Based on morphological and molecular data, 27 isolates from 11 fungal species were isolated and identified from Salsola tissues. Alternaria alternata, A. chlamydospora, Aspergillus terreus, Macrophomina phaseolina, Fusarium longipes, Ulocladium atrum, and Talaromyes pinophilus caused root or stem rotting and yellowing leaf of S. incanescens under greenhouse conditions. Aspergillus niger induced S. incanescens crown swelling without any pathogenicity. Clonostachys rosea, F. redolens and F. proliferatum grew as endophytic fungi on S. incanescens roots. This is the first report of phytopathogenic M. phaseolina, F. longipes, T. pinophilus, endophytic F. redolens and A. niger as a swelling agent on S. incanescens.

A novel approach to a trigger mode in the Gas Electron Multiplier (GEM) detector readout system is presented. The system is already installed at WEST tokamak. The article briefly describes the architecture of the GEM detector and the measurement system. Currently the system can work in two trigger modes: Global Trigger and Local Trigger. All trigger processing blocks are parts of the Charge Signal Sequencer module which is responsible for transferring data to the PC. Therefore, the article presents structure of the Sequencer with details about basic blocks, theirs functionality and output data configuration. The Sequencer with the trigger algorithms is implemented in an FPGA chip from Xilinx. Global Trigger, which is a default mode for the system, is not efficient and has limitations due to storing much data without any information. Local trigger which is under tests, removes data redundancy and is constructed to send only valid data, but the rest of the software, especially on the PC side, is still under development. Therefore authors propose the trigger mode which combines functionality of two existing modes. The proposed trigger, called Zero Suppression Trigger, is compatible with the existing interfaces of the PC software, but is also capable to verify and filter incoming signals and transfer only recognized events. The results of the implementation and simulation are presented.

Background: Autonomic dysfunction, impaired baroreflex sensitivity (BRS), and deranged circulatory homeostasis have been observed in chronic hyperglycemia and found to be associated with increased cardiovascular morbidity and mortality. However, the acute effects of hyperglycemia in healthy subjects have been rarely studied. The present study explores the effect of acute hyperglycemia on con-ventional and unconventional parameters of BRS in healthy young adults.
Methods: For the estimation of BRS beat-to-beat blood pressure (BP) and electrocardiogram were recorded in forty-two young, healthy subjects during fasting and at 1hr of the oral glucose load. Analysis of BRS was carried out by sequence and spectral method. Number of UP-, DOWN- and ALL-sequences between ramps of BP and RR-interval were calculated as an unconventional measure of BRS along with the other conventional parameters.
Results: We observed significant alteration of unconventional parameters of autonomic functions [the number of sequences of UP- (p = 0.0039) and ALL-sequences (p = 0.0233) of systolic BP and RR interval; and, UP- (p = 0.0380), DOWN- (p = 0.0417) and ALL-sequences (p = 0.0313) of mean BP and RR- interval] during acute hyperglycemia as compared to the fasting state. However, no significant changes were observed in any of the conventional parameters of BRS during acute hyperglycemia as compared to the fasting state.
Conclusions: Present study concludes that the unconventional parameters of BRS — the number of sequences between the ramp of BP and RR-interval — change significantly during acute hyperglycemia. However, the conventional parameters do not show significant changes during acute hyperglycemia. We may hypothesize that the relatively constant BRS is maintained at the expense of increased oscillations in the ramp of BP and RR-interval.

Staphylococcus pseudintermedius (SP) and methicillin-resistant SP (MRSP) is one of the most important veterinary pathogens in the dog. Herein, from a total of 126 S. pseudintermedius strains, 23 MRSP (18%) were identified. Multi-Locus Sequence Typing (MLST) revealed that most of MRSP strains belonged to ST71 (26%), which have been already reported in Italy and other countries. Interestingly, nine new sequence types (39%), from 1053 up to 1061, were described for the first time. Moreover, the isolated MRSP strains showed relevant antibiotic resistance profiles. This report highlights the circulation of new sequence types of MRSP in Italy and underlines the need of a global epidemiological surveillance to limit the increasing spread of multidrug-resistant MRSP strains worldwide, since they may represent a considerable concern for dog’s health.

The subject of this paper is the control possibility of the multiphase cage induction motors having number of phases greater than 3. These motors have additional properties for speed control that distinguish them from the standard 3 phase motors: operation at various sequences of supplying voltages due to the inverter control and possible operation with few open-circuited phases. For each supply sequence different no load speeds at the same frequency can be obtained. This feature extends the motor application for miscellaneous drive demands including vector or scalar control. This depends mainly on the type of the stator winding for a given number of phases, since the principle of motor operation is based on co-operation of higher harmonics of magnetic field. Examples of operation are presented for a 9-phase motor, though general approach has been discussed. This motor was fed by a voltage source inverter at field oriented control with forced currents. The mathematical model of the motor was reduced to the form incorporating all most important physical features and appropriate for the control law formulation. The operation was illustrated for various supply sequences for “healthy” motor and for the motor operating at one phase broken. The obtained results have shown that parasitic influence of harmonic fields interaction has negligible influence on motor operation with respect to the useful coupling for properly designed stator winding.

Self-biting disease occurs in most farmed fur animals in the world. The mechanism and rapid detection method of this disease has not been reported. We applied bulked sergeant analysis (BSA) in combination with RAPD method to analyze a molecular genetic marker linked with self-biting trait in mink group. The molecular marker was converted into SCAR and loop-mediated isothermal amplification (LAMP) marker for rapid detection of this disease. A single RAPD marker A10 amplified a specific band of 1000bp in self-biting minks. The sequences of the bands exhibited 73% similarity to the Canis Brucella. SCAR and LAMP marker were designed for the specific fragment of RAPD marker A10 and validated in 30 self-biting minks and 30 healthy minks. c2 test showed difference (p<0.05) with SCAR and significant difference (p<0.01) with LAMP in the detection rate between the two groups, but LAMP method was more accurate than SCAR method. This indicated that LAMP can be used as a positive marker to detect self-biting disease in minks.

The results presented here are twofold. First, a heuristic algorithm is proposed which, through removing some unnecessary arcs from a digraph, tends to reduce it into an adjoint and thus simplifies the search for a Hamiltonian cycle. Second, a heuristic algorithm for DNA sequence assembly is proposed, which uses a graph model of the problem instance, and incorporates two independent procedures of reducing the set of arcs - one of them being the former algorithm. Finally, results of tests of the assembly algorithm on parts of chromosome arm 2R of Drosophila melanogaster are presented.

The main objective of this work is to provide a closed formula for the backward and symmetric solution of the 2-D implicit Roesser model. The relative forward and backward fundamental matrix is of fundamental importance in our approach. An algorithm for the

determination of the backward fundamental matrix sequense is also given.

The Upper Greensand Formation, mostly capped by the Chalk, crops out on the edges of a broad, dissected

plateau in Devon, west Dorset and south Somerset and has an almost continuous outcrop that runs from the Isle

of Purbeck to the Vale of Wardour in south Wiltshire. The Formation is well exposed in cliffs in east Devon and

the Isle of Purbeck, but is poorly exposed inland. It comprises sandstones and calcarenites with laterally and

stratigraphically variable amounts of carbonate cement, glauconite and chert. The sedimentology and palaeon-

tology indicate deposition in marginal marine-shelf environments that were at times subject to strong tidal and

wave-generated currents. The formation of the Upper Greensand successions in the region was influenced by

penecontemporaneous movements on major fault zones, some of which are sited over E-W trending Variscan

thrusts in the basement rocks and, locally, on minor faults. Comparison of the principal sedimentary breaks in

the succession with the sequence boundaries derived from world-wide sea-level curves suggests that local tec-

tonic events mask the effects of any eustatic changes in sea level. The preserved fauna is unevenly distributed,

both laterally and stratigraphically. Bivalves, gastropods and echinoids are common at some horizons but are

not age-diagnostic. Ammonites are common at a few stratigraphically narrowly defined horizons, but are rare

or absent throughout most of the succession. As a result, the age of parts of the succession is still poorly known

The paper presents a Car Sequencing Problem, widely considered in the literature. The issue considered by the researchers is only a reduced problem in comparison with the problem in real automotive production. Consequently, a newconcept, called Paint Shop 4.0., is considered from the viewpoint of a sequencing problem. The paper is a part of the previously conducted research, identified as Car Sequencing Problem with Buffers (CSPwB), which extended the original problem to a problem in a production line equipped with buffers. The new innovative approach is based on the ideas of Industry 4.0 and the buffer management system. In the paper, sequencing algorithms that have been developed so far are discussed. The original Follow-up Sequencing Algorithm is presented, which is still developed by the authors. The main goal of the research is to find the most effective algorithm in terms of minimization of painting gun changeovers and synchronization necessary color changes with periodic gun cleanings. Carried out research shows that the most advanced algorithm proposed by the authors outperforms other tested methods, so it is promising to be used in the automotive industry.

Passion fruit is an important fruit crop grown in parts of southern and north-eastern states of India. Leaf curl symptoms typical to begomovirus infection were observed on passion fruit plants at three locations of Madikeri District, Karnataka State, India. The disease incidence ranged from 10–20% in all the locations. In order to determine if the begomovirus was associated with leaf curl disease of passion fruit, 20 infected samples collected from different locations were subjected to PCR analysis using primers specific to begomovirus. This resulted in an expected PCR product of ~1.2 kb. Sequence analysis of these products revealed that they have more than 98% similarity among them and have similarity with other begomoviruses. Complete genome sequencing of begomovirus associated with one sample (PF1 collected from CHES, Madikeri) was done using RCA. Further, sequencing of betasatellite and alphasatellite was done after PCR amplification using specific primers. Complete DNA-A sequence of PF-isolate with other begomoviruses revealed that it shared nucleotide (nt) identity of 87.8 to 88.8% with Ageratum enation virus. This indicated the association of a novel begomovirus with leaf curl disease of passion fruit in India, for which we propose the name, Passion fruit leaf curl virus (PFLCuV) [IN-Kar-18]. PFLCuV associated betasatellite shared 98.3% sequence identity with Tomato leaf curl Bangladesh betasatellite, while alphasatellite had 95.7% sequence identity with Cotton leaf curl Multan alphasatellite. Recombinant analysis indicated a major component of PFLCuV DNA-A may have originated from a recombination of earlier reported begomoviruses. Recombination as well as GC plot analysis showed that the recombination occurred in the genome regions having low GC content regions of PFLCuV. However, there is no evidence of recombination in alphasatellite and betasatellite associated with leaf curl disease of passion fruit. This is the first record of a novel begomovirus and satellites associated with leaf curl disease of passion fruit from India.

The root-knot nematode Meloidogyne graminicola is an economically important pest in rice production. The identification of a nematode species is an important basis in nematode management to reduce yield losses by extracting nematode DNA as an early step in molecular identification. This study aimed to investigate the optimal extraction method and number of M. graminicola for nematode genomic analysis based on PCR (polymerase chain reaction) and Sanger sequencing. The DNA extraction methods used in this study were the CTAB, SDS, and commercial kit (GeneAidTM Tissue/Blood DNA Mini Kit). The results revealed that the three DNA extraction methods could be used to analyze the nematode genomics based on PCR and Sanger sequencing using one nematode, both in a second-stage juvenile and a female, equipped with the process of nematode destruction by freezing. This finding was shown by the amplification of all DNA templates with Mg-F3 and Mg-R2 primers through PCR with a size of 370 bp, while Sanger sequencing obtained 372 bp.

On the one hand, mathematics draws inspiration from everyday life and has the ambition to model it through a precise logical system, while on the other, it contributes new, sometimes very abstract ideas which expand our imagination and broaden our understanding of the surrounding reality. This is clearly illustrated when we scrutinize various mathematical concepts centered around the notion of “boundary.”

To analyze the composition of norfloxacin-resistant bacteria and norfloxacin-degrading bacteria in pond water and sediment in subtropical China, the composition of antibiotic resistant bacteria in pond water and sediment enriched with norfloxacin-containing medium was analyzed by high-throughput sequencing. Sediment and water samples were collected from 3 fish ponds in subtropical China, and domesticated with norfloxacin, subsequently norfloxacin-resistant bacteria through high-throughput sequencing of 16S rDNA, and isolated norfloxacin- degrading bacteria. Our results showed that the pond sediment and water contain a variety of norfloxacin-resistant bacteria, mainly from Proteobacteria, Bacteroidetes, Actinobacteria, Firmicutes, and Chloroflexi. Moreover, we isolated two norfloxacin-degrading bacteria (NorXu-2 and NorXu-3). The norfloxacin-degrading rate by NorXu-2 and NorXu-3 in the culture mediums with 200 μg/mL was the highest, which was up to 49.71% and 35.79%,respectively. When the norfloxacin concentration was 200 μg/mL, NorXu-2 and NorXu-3 had the best norfloxacin-degrading effect at pH of 6, and the degradation rates were 53.64% and 45.54%, respectively. Moreover, NorXu-3 exhibited a good tolerance to high NaCl concentration. These results not only provided basic data for the follow-up study of the molecular mechanism of antimicrobial microbial degradation, but also provided potential norfloxacin degrading bacteria for norfloxacin removal and bioremediation in aquaculture environment.

In 2016, bacterial canker symptoms, often with dried ooze, were observed on Salix alba plants in municipal lands and parks in Kerman and Fars provinces, Iran. To determine the causative agent, samples were collected from symptomatic trees, and macerates of the affected bark tissues were plated on sucrose nutrient agar (SNA). Ten isolates were identified by phenotypic characterization, pathogenicity tests, and two of them further confirmed identity using sequence analysis of the partial of 16S rRNA and gyrB genes, and phylogenetic analysis. The isolates showed the highest identity (99–100%) with Brenneria salicis. To our knowledge, this is the first report of watermark disease on S. alba caused by B. salicis in Iran.

In Polish coal mining, medium voltage power distribution networks operate with an insulated neutral point. Zero-sequence current transformers are the basic sensors that generate input signals for earth-fault protection relays. In the literature, the problem of frequency response analysis of various types of current transformers has been examined many times, e.g. [1] [2], but not for zero-sequence current transformers so far. As part of the work, two types of zero-sequence current transformers in the range from 0.1 Hz to 100 kHz were tested. Both the change of the current ratio and the angular shift between the transformer secondary current and the total primary current were analyzed.

Theileriosis is a hemoparasitic disease that affects a wide range of different animal species and is caused by various species of Theileria. This study aimed to determine the molecular epidemiology of Theileria annulata through microscopy and PCR, in crossbred cattle in some districts of Khyber Pakhtunkhwa, Pakistan. For this study, a total of 384 blood samples were collected from cattle in the Peshawar (n=120), Charsadda (n=94), Nowshera (n=84), and Swabi (n=86) districts. Microscopy and PCR were used to determine the overall prevalence of theileriosis, which was found to be 15.8 and 22.6%, respectively. Theileria annulata was detected in blood samples through PCR in the study area, and the target gene i.e., Tams 1, of positive samples was sequenced. The sequences in the current study revealed high sequence homology (ranging from 96 to 100%) with Tams 1 sequences of neighboring countries present in the NCBI database. Season, breed, age, and sex were found to be important risk factors among the several risk factors examined, whereas, among different clinical manifestations, lymphadenopathy showed a strong association with theileriosis. According to Cohen’s kappa and ROC analysis, microscopy was proven to be a fair diagnostic test for detecting theileriosis in cattle, and may be used in combination with molecular techniques for screening a large number of animals.

Bacteria from the Simkaniaceae family are intracellular parasites belonging to the Chlamydiales order, detected in surface waters, drinking water, chlorine water, and in wastewater. Its main representative, Simkania negevensis, is pathogenic to humans and animals, especially fishes, as it principally causes respiratory tract diseases. Bacteria from this family are also capable of surviving and existing in free-living amoebas, omnipresent in the natural environment, which makes them an additional risk for human and animal health. The aim of the present study was to search for representatives of this family in freshwaters from the Odra River and two municipal lakes (Rusałka and Goplana). Out of 100 water samples analysed, the sequence of bacteria of Simkaniaceae family was found just in 1 percent, because phylogenetic analysis revealed that the obtained OdraWCh30 sequence shows 93% similarity to Simkania negevensis strain Z as well as 87% similarity to Candidatus Syngnamydia salmonis isolate Ho-2008 and Candidatus Syngnamydia salmonis isolate VS10102006 and 84-85% similarity to endosymbiont of Xenoturbella westbladi, Simkaniaceae bacterium clone SM081012-5s and Candidatus Syngnamydia venezia strain Pi3-2. This is the first case of detecting sequence of bacteria of Simkaniaceae family in the aquatic environment in Poland.

The welfare and healthy growth of poultry under intensive feeding conditions are closely related to their living environment. In spring, the air quality considerably decreases due to reduced ventilation and aeration in cage systems, which influences the meat quality and health of broilers during normal growth stages. In this study, we analyzed the airborne bacterial communities in PM2.5 and PM10 in cage broiler houses at different broiler growth stages under intensive rearing conditions based on the high-throughput 16S rDNA sequencing technique. Our results revealed that PM2.5, PM10 and airborne microbes gradually increased during the broiler growth cycle in poultry houses. Some potential or opportunistic pathogens, including Acinetobacter, Pseudomonas, Enterococcus, Microbacterium, etc., were found in the broiler houses at different growth stages. Our study evaluated variations in the microbial communities in PM2.5 and PM10 and potential opportunistic pathogens during the growth cycle of broilers in poultry houses in the spring. Our findings may provide a basis for developing technologies for air quality control in caged poultry houses.