The question of what is the difference between borrowing and code-switching has attracted the attention of scholars far and wide and gave at the same time rise to a plethora of publications in order to draw a boundary between these two terms. In the most recent of these publications (Grosjean 1982, Poplack & Meechan 1995 & 1998; to name but a few), it has been often argued that borrowings are donor-language items that are integrated in the grammar of the recipient language at a community level, while code-switches take place at individual level and they retain the grammar of the language from which they derive. However, the current political and economic uncertainties in various regions of the world have been found to cause mass refugee movements to conflict-free places, where contact between newcomers and locals usually lead to some kind of linguistic interinfluencing. The current study discusses the contactinduced German-origin lone lexical items used by Iraqi-Arabic-speaking refugees in Germany. It is the aim of this study to show whether or not these lexical items can be considered as code-switches or established borrowings. The data I am analyzing come from spontaneous and elicited conversations of the first and second wave of Iraqi- Arabic-speaking refugees and asylum seekers to Germany as well as from online- and paper-pencil-questionnaires.
Currently, work is underway to manufacture and find potential applications for a photoconductive semiconductor switch made of a semi-insulating material. The article analyzes the literature in terms of parameters and possibilities of using PCSS switches, as well as currently used switches in power and pulse power electronic system. The results of laboratory tests for the prototype model of the GaP-based switch were presented and compared with the PCSS switch parameters from the literature. The operating principle, parameters and application of IGBT transistor, thyristor, opto-thyristor, spark gap and power switch were presented and discussed. An analysis of the possibilities of replacing selected elements by the PCSS switch was carried out, taking into account the pros and cons of the compared devices. The possibility of using the currently made PCSS switch from gallium phosphide was also discussed.
Generation of two identical ns laser pulses spaced by a single µs time interval by means of sequential switching of the output mirror transmittance in a diode-pumped Nd:YAG laser is reported, to our knowledge, for the first time. The theoretical study of the process of transmission losses switching is developed. This analysis confirms the possibility of generation of two identical Q-switched laser pulses with 100% efficiency with respect to the referenced single pulse energy. The detailed characterization of the laser in free-running, single and double Q-switching regimes is presented. The laser can be applied in different branches of metrology as PIV, LIBS or holographic interferometry.
The increased power density, reduced switching losses with minimum electromagnetic interference (EMI), and high efficiency are essential requirements of power converters. To achieve these characteristics, soft power converters employing soft switching techniques are indispensable. In this paper, a ZCS/ZVS PWM AC/DC converter topology has been emphasized, which finds applications in high power systems such as automobile battery charging and renewable energy systems. This converter scheme maintains zero current and zero voltage switching conditions at turn on and turn off moments of semiconductor switches, respectively and soft operation of rectifier diodes that lead to negligible switching and diode reverse recovery losses. Moreover, it improves power quality and presents high input power factor, low total harmonic distortion of the input current (THDI) and improved efficiency. The validity of theoretical analysis of the proposed converter has been carried out experimentally on a 10 kW laboratory prototype. Experimental results prove that the soft switching operation of the semiconductor switches and diodes is maintained at 98.6% rated load efficiency. In addition, the performance evaluation has been performed by comparative analysis of the proposed converter with some prior art high power AC/DC converters. Efficiencies of the proposed and prior art high power topologies have been determined for different load conditions. The highest efficiency, power factor and lower THDI of the proposed converter topology complies with international standards.
This paper presents the current state of a photoconductive semiconductor switch engineering. A photoconductive semiconductor switch is an electric switch with its principle of operation based on the phenomenon of photoconductivity. The wide application range, in both low and high-power devices or instruments, makes it necessary to take design requirements into account. This paper presents selected problems in the scope of designing photoconductive switches, taking into account, i.e. issues associated with the element trigger speed, uniform distribution of current density, thermal resistance, operational lifespan, and a high, local electric field generated at the location of electrodes. A review of semiconductor materials used to construct devices of this type was also presented.
An intelligent boundary switch is a three-phase outdoor power distribution device equipped with a controller. It is installed at the boundary point on the medium voltage overhead distribution lines. It can automatically remove the single-phase-to-ground fault and isolation phase-to-phase short-circuit fault. Firstly, the structure of an intelligent boundary switch is studied, and then the fault detection principle is also investigated. The single-phase-to-ground fault and phase-to-phase short-circuit fault are studied respectively. A method using overcurrent to judge the short-circuit fault is presented. The characteristics of the single-phase-to-ground fault on an ungrounded distribution system and compositional grounded distribution system are analyzed. Based on these characteristics, a method using zero sequence current to detect the single-phase-to-ground fault is proposed. The research results of this paper give a reference for the specification and use of intelligent boundary switches.
The paper addresses the problem of placement of sectionalizing switches in medium voltage distribution networks. Proper placement of sectionalizing switches is one of the elements leading to higher power networks reliability. The methods of optimal allocation of such switches in a MV distribution network are presented in the paper. SAIDI was used as a criterion for the sectionalizing switches placement. For selecting optimum placements, three methods were used: brute force method, evolutionary algorithm and heuristic algorithm. The calculations were performed for a real MV network.
This paper proposes the development of a formation control algorithm of multiple acoustic underwater vehicles by employing the behaviour of autonomous mobile agents under a proposed pursuit. A robust pursuit is developed using the distributed consensus coordinated algorithm ensuring the transfer of information among the AUVs. The development of robust pursuit based on characteristics of multi-agent system is for solving the incomplete information capabilities in each agent such as asynchronous computation, decentralized data and no system global control. In unreliable and narrow banded underwater acoustic medium, the formation of AUVs based distributed coordinated consensus tracking can be accomplished under the constant or varying virtual leader’s velocity. Further, the study to achieve tracking based on virtual leader AUV’s velocity is extended to fixed and switching network topologies. Again for mild connectivity, an adjacency matrix is defined in such a way that an adaptive connectivity is ensured between the AUVs. The constant virtual leader vehicle velocity method based on consensus tracking is more robust to reduce inaccuracy because no accurate position and velocity measurements are required. Results were obtained using MATLAB and acquired outcomes are analysed for efficient formation control in presence of the underwater communication constraints.
This paper demonstrates that if a linear dependence of arc dissipated power on power supplied is introduced at an initial stage of analysis, then, with some simplifying assumptions, the classical Mayr model is obtained. Similarly, if this dependence is taken into account in a model with residual conductance, the modified Mayr model is obtained. The study takes into consideration the local phenomenon of sudden voltage drop accompanying linear current decrease occurring in the circuit breaker. To account for this phenomenon, the Dirac delta function and its approximation by a Gaussian function, representing power or enthalpy disturbances, are introduced to the power balance equation. It is demonstrated that both variants yield the same effect, leading to identical differential equations. Macromodels of the circuit-breaker arc are created and connected with the power source circuit with lin- early decreasing current. The results obtained were found to be consistent with experimental data available in the literature. The models presented are based on a fairly uncomplicated 1st order differential equation and offer a straightforward physical interpretation of the phenomena in question.
In order to realize constant current and constant voltage charging for batteries by inductively coupled power transfer (ICPT) technology, a single-switch CL/LCL circuit is designed. The single-switch CL/LCL circuit is composed of a CL/LCL compensation network and single-switch inverter. The proposed circuit is compared with the traditional constant current and constant voltage circuit in the structure. The operating process of the single-switch CL/LCL circuit and the principle to realize a zero-voltage switch (ZVS) are analysed in detail in this paper. The voltage gain and current gain of the circuit are cal- culated, which demonstrates that the circuit is able to suppress higher harmonics strongly. By using Fourier decomposition, the voltage on the primary-side compensation capaci- tor can be obtained. After constructing the equivalent mutual inductance model of the circuit, the formulas and parameters are deduced and calculated. Finally, an experiment platform is built to verify the proposed circuit can realize constant current and constant voltage.
A spectrum defragmentation problem in elastic optical networks was considered under the assumption that all connections can be realized in switching nodes. But this assumption is true only when the switching fabric has appropriate combinatorial properties. In this paper, we consider a defragmentation problem in one architecture of wavelength-spacewavelength switching fabrics. First, we discuss the requirements for this switching fabric, below which defragmentation does not always end with success. Then, we propose defragmentation algorithms and evaluate them by simulation. The results show that proposed algorithms can increase the number of connections realized in the switching fabric and reduce the loss probability.
The purpose of this paper is to propose a model of a novel quasi-resonant boost converter with a tapped inductor. This converter combines the advantages of zero voltage quasi-resonant techniques and different conduction modes with the possibility of obtaining a high voltage conversion ratio by using a tapped inductor, which results in high converter efficiency and soft switching in the whole output power range. The paper contains an analysis of converter operation, a determination of voltage conversion ratio and the maximum voltage across power semiconductor switches as well as a discussion of control methods in discontinuous, critical, and continuous conduction modes. In order to verify the novelty of the proposed converter, a laboratory prototype of 300 W power was built. The highest efficiency η = 94.7% was measured with the output power Po = 260 W and the input voltage Vin = 50 V. The lowest efficiency of 90.7% was obtained for the input voltage Vin = 30 V and the output power Po = 75 W. The model was tested at input voltages (30–50) V, output voltage 380 V and maximum switching frequency 100 kHz.
We demonstrate MW-level, single resonance optical parametric oscillator, based on KTP Type-II crystal with noncritical phase-matching. The OPO is pumped by electro-optically Q-switched Nd:YAG slab laser providing 55 mJ of pulse energy. At the output, we achieved 28 mJ of signal pulse energy at 1.57 μm with 51% conversion efficiency, corresponding to 1.4 MW of peak power.
In this work we discuss a method of preparation of a highly sensitive light detector based on ZnO nanorods. A photoresistor constructed by us is based on a heterojunction between high quality ZnO nanorods and high resistivity p-type Si used as a substrate for nanorods’ deposition. ZnO nanorods are grown by a modified version of a microwave assisted hydrothermal method which allows for growth of high quality ZnO nanorods in a few minutes. The obtained photoresistor responds to a wide spectral range of light starting from near infrared (IR) to ultraviolet (UV). Properties of the detector are evaluated. We propose the use of the detector as an optical switch.
This paper demonstrates the use of a zinc oxide (ZnO) thin film in a 1-μm ring laser cavity as a saturable absorber to successfully generate Q-switching pulses. The tunability of the laser pulses is achieved by integrating a tunable bandpass filter (TBPF) in an ytterbium-doped laser cavity that results in 9.4 nm of tuning range, which wavelength is from 1040.70 nm to 1050.1 nm. The peak energy in the pulse which is 1.47 nJ was measured together with a minimum pulse width of 2.4 μs. In addition, the repetition rate increases from 25.77 to 45.94 kHz as the pump power level being increased from 103.1 to 175.1 mW. The results obtained in this experiment demonstrated consistent results and stable throughout the experiment. Therefore, ZnO thin film is considered as a good candidate in 1-μm pulsed laser applications.
This paper proposes a design procedure for observer-based controllers of discrete-time switched systems, in the presence of state’s time-delay, nonlinear terms, arbitrary switching signals, and affine parametric uncertainties. The proposed switched observer and the state- feedback controller are designed simultaneously using a set of linear matrix inequalities (LMIs). The stability analysis is performed based on an appropriate Lyapunov–Krasovskii functional with one switched expression, and in the meantime, the sufficient conditions for observer-based stabilization are developed. These conditions are formulated in the form of a feasibility test of a proposed bilinear matrix inequality (BMI) which is a non-convex problem. To make the problem easy to solve, the BMI is transformed into a set of LMIs using the singular value decomposition of output matrices. An important advantage of the proposed method is that the established sufficient conditions depend only on the upper bound of uncertain parameters. Furthermore, in the proposed method, an admissible upper bound for unknown nonlinear terms of the switched system may be calculated using a simple search algorithm. Finally, the efficiency of the proposed controller and the validity of the theoretical results are illustrated through a simulation example.
en
pl
