Nauki Techniczne

Archives of Control Sciences

Zawartość

Archives of Control Sciences | 2021 | vol. 31 | No 1 |

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

In this report, ankle rehabilitation routines currently approved by physicians are implemented via novel control algorithms on a recently appeared robotic device known as the motoBOTTE. The physician specifications for gait cycles are translated into robotic trajectories whose tracking is performed twofold depending on the availability of a model: (1) if obtained via the Euler-Lagrange approach along with identification of unknown plant parameters, a new computed-torque control law is proposed; it takes into account the parallel-robot characteristics; (2) if not available, a variation of the active disturbance rejection control technique whose parameters need to be tuned, is employed. A detailed discussion on the advantages and disadvantages of the model-based and model-free results, from the continuous-time simulation to the discrete-time implementation, is included.
Przejdź do artykułu

Bibliografia


[1] N. Alibeji, N. Kirsch, S. Farrokhi, and N. Sharma: Further results on predictor-based control of neuromuscular electrical stimulation, IEEE Transactions on Neural Systems and Rehabilitation Engineering, 23(6), (2015), 1095–1105.
[2] J. Alvarez, J.C. Arceo, C. Armenta, J. Lauber, and M. Bernal: An extension of computed-torque control for parallel robots in ankle reeducation, IFAC-PapersOnLine, 52(11), (2019), 1–6.
[3] J.C. Arceo, J. Lauber, L. Robinault, S. Paganelli, M. Jochumsen, I.K. Niazi, E. Simoneau, and S. Cremoux: Modeling and control of rehabilitation robotic device: motobotte, In International Conference on NeuroRehabilitation, pages 546–550. Springer, 2018.
[4] J.C. Arceo, M. Sanchez, V. Estrada-Manzo, and M. Bernal: Convex stability analysis of nonlinear singular systems via linear matrix inequalities, IEEE Transactions on Automatic Control, 2018.
[5] V. Arnez-Paniagua, H. Rifai, Y. Amirat, M. Ghedira, J. M. Gracies, and S. Mohammed: Adaptive control of an actuated ankle foot orthosis for paretic patients, Control Engineering Practice, 90 (2019), 207–220.
[6] E.J. Benjamin, S.S. Virani, C.W. Callaway, A.M. Chamberlain, A.R. Chang, S. Cheng, S.E. Chiuve, M. Cushman, F.N. Delling, R. Deo, et al.: Heart disease and stroke statistics-2018 update: a report from the American Heart Association, Circulation, 137(12), (2018), e67.
[7] A˙ . Bjorck and V. Pereyra: Solution of vandermonde systems of equations, Mathematics of Computation, 24(112), (1970), 893–903.
[8] D. Brown, B. Boden-Albala, K. Langa, L. Lisabeth, M. Fair, M. Smith, R.L. Sacco, and L. Morgenstern: Projected costs of ischemic stroke in the united states, Neurology, 67(8), (2006) 1390–1395.
[9] G.C. Burdea, D. Cioi, A. Kale,W.E. Janes, S.A.Ross, and J.R. Engsberg: Robotics and gaming to improve ankle strength, motor control, and function in children with cerebral palsy—a case study series, IEEE Transactions on Neural Systems and Rehabilitation Engineering, 21(2), (2012), 165–173.
[10] H. Cheng, Y.K. Yiu, and Z. Li: Dynamics and control of redundantly actuated parallel manipulators, IEEE/ASME Transactions on mechatronics, 8(4), (2003), 483–491.
[11] D.M.Dawson, C.T. Abdallah, and F.L. Lewis: Robot manipulator control: theory and practice, CRC Press, 2003.
[12] I. Diaz, J. J. Gil, and E. Sanchez: Lower-limb robotic rehabilitation: literature review and challenges, Journal of Robotics, 2011, Article ID 759764.
[13] A. Dontchev and W. Hager: The euler approximation in state constrained optimal control, Mathematics of Computation, 70(233), (2001), 173–203.
[14] V.L. Feigin, M.H. Forouzanfar, R. Krishnamurthi, G.A. Mensah, M. Connor, D.A. Bennett, A.E. Moran, R.L. Sacco, L. Anderson, T. Truelsen, et al.: Global and regional burden of stroke during 1990–2010: findings from the global burden of disease study 2010, The Lancet, 383(9913), (2014), 245–255.
[15] M. Ferrarin, F. Palazzo, R. Riener, and J. Quintern: Model-based control of fes-induced single joint movements, IEEE Transactions on Neural Systems and Rehabilitation Engineering, 9(3), (2001), 245–257.
[16] P. Ghosh: Numerical, Symbolic and Statistical Computing for Chemical Engineers using MATLAB, PHI Learning Pvt. Ltd., 2018.
[17] J. Han: From pid to active disturbance rejection control, IEEE transactions on Industrial Electronics, 56(3), (2009), 900–906.
[18] H. Herr: Exoskeletons and orthoses: classification, design challenges and future directions, Journal of Neuroengineering and Rehabilitation, 6(1), (2009), 21.
[19] N. Instruments: NI myRIO-1900 User Guide and Specifications, National Instruments, 11500 North Mopac Expressway, Austin, Texas, 78759–3504, 376047c-01 edition, May 2016.
[20] S. Jezernik, G. Colombo, T. Keller, H. Frueh, and M. Morari: Robotic orthosis lokomat: A rehabilitation and research tool, Neuromodulation: Technology at the neural interface, 6(2), (2003), 108–115.
[21] M. Jochumsen, S. Cremoux, L. Robinault, J. Lauber, J.C. Arceo, M. Navid, R. Nedergaard, U. Rashid, H. Haavik, and I. Niazi: Investigation of optimal afferent feedback modality for inducing neural plasticity with a self-paced brain-computer interface, Sensors, 18(11), (2018), 3761.
[22] M.A. Khosravi and H.D.Taghirad:Robust pid control of fully-constrained cable driven parallel robots, Mechatronics, 24(2), (2014), 87–97.
[23] V. Klee and G. J. Minty: How good is the simplex algorithm, Technical report, Washington Univ Seattle Dept. of Mathematics, 1970.
[24] P. Langhorne, J. Bernhardt, and G. Kwakkel: Stroke rehabilitation, The Lancet, 377(9778), (2011), 1693–1702.
[25] F.L. Lewis:Asurvey of linear singular systems, Circuits, Systems and Signal Processing, 5(1), (1986), 3–36.
[26] O. Linda and M. Manic: Uncertainty-robust design of interval type-2 fuzzy logic controller for delta parallel robot, IEEE Transactions on Industrial Informatics, 7(4), (2011), 661–670.
[27] H. Markus: Stroke: causes and clinical features, Medicine, 36(11), (2008), 586–591.
[28] J. Merlet: Parallel robots, volume 128, Springer Science & Business Media, 2006.
[29] M. Motor: ESCON 50/5 DC Servo Controller Hardware Reference, Maxon Motor, Bränigstrasse 220 P.O.Box 263 CH-6072 Sachseln, rel7125 edition, November 2018.
[30] N.S. Nedialkov, J.D. Pryce, and G. Tan: Algorithm 948: Daesa—a matlab tool for structural analysis of differential-algebraic equations: Software, ACM Transactions on Mathematical Software (TOMS), 41(2), (2015), 12.
[31] M. Noel, B. Cantin, S. Lambert, C.M. Gosselin, and L.J. Bouyer: An electrohydraulic actuated ankle foot orthosis to generate force fields and to test proprioceptive reflexes during human walking, IEEE Transactions on Neural Systems and Rehabilitation Engineering, 16(4), (2008), 390–399.
[32] C.C. Pantelides: The consistent initialization of differential-algebraic systems, SIAM Journal on Scientific and Statistical Computing, 9(2), (1998), 213–231.
[33] L. Peng, Z.-G. Hou, and W. Wang: Dynamic modeling and control of a parallel upper-limb rehabilitation robot, In 2015 IEEE International Conference on Rehabilitation Robotics (ICORR), pages 532–537, 2015.
[34] J.C. Perez-Ibarra and A.A. Siqueira: Comparison of kinematic and emg parameters between unassisted, fixed-and adaptive-stiffness robotic-assisted ankle movements in post-stroke subjects, In 2017 International Conference on Rehabilitation Robotics (ICORR), pages 461–466. IEEE, 2017.
[35] N. Petroff, K.D. Reisinger, and P.A. Mason: Fuzzy-control of a hand orthosis for restoring tip pinch, lateral pinch, and cylindrical prehensions to patients with elbow flexion intact, IEEE Transactions on Neural Systems and Rehabilitation Engineering, 9(2), (2001), 225–231.
[36] Z. Qi, J.E. McInroy, and F. Jafari: Trajectory tracking with parallel robots using low chattering, fuzzy sliding mode controller, Journal of Intelligent and Robotic Systems, 48(3), (2007) 333–356.
[37] P.J. Rabier and W.C. Rheinboldt: Theoretical and numerical analysis of differential-algebraic equations, Elsevier, 2002.
[38] E.J. Rouse, L.J. Hargrove, E.J. Perreault, and T.A. Kuiken: Estimation of human ankle impedance during the stance phase of walking, IEEE Transactions on Neural Systems and Rehabilitation Engineering, 22(4), (2014), 870–878.
[39] B.S. Rupal, S. Rafique, A. Singla, E. Singla, M. Isaksson, and G.S. Virk: Lower-limb exoskeletons: Research trends and regulatory guidelines in medical and non-medical applications, International Journal of Advanced Robotic Systems, 14(6), (2017), 1729881417743554.
[40] A. Sala and C. Arino: Polynomial fuzzy models for nonlinear control: A Taylor series approach, IEEE Transactions on Fuzzy Systems, 17(6), (2009), 1284–1295.
[41] L. F. Shampine, S. Thompson, J. Kierzenka, and G. Byrne: Non-negative solutions of odes, Applied Mathematics and Computation, 170(1), (2005), 556–569.
[42] W.W. Shang, S. Cong, and Y. Ge: Adaptive computed torque control for a parallel manipulator with redundant actuation, Robotica, 30(3), (2012) 457–466.
[43] K.A. Shorter, G.F. Kogler, E. Loth, W.K. Durfee, and E.T. Hsiao- Wecksler: A portable powered ankle-foot orthosis for rehabilitation, Journal of Rehabilitation Research & Development, 48(4), (2011).
[44] Y. Shtessel, C. Edwards, L. Fridman, and A. Levant: Sliding mode control and observation, Springer, 2014.
[45] R.M. Singh, S. Chatterji, and A. Kumar: Trends and challenges in emg based control scheme of exoskeleton robots-a review, Int. J. Sci. Eng. Res., 3(9), (2012), 933–940.
[46] SKF: CAHB-21: Linear Actuator. Installation, operation and maintenance manual, SKF Taiwan Co., Ltd, No. 3, Lane 11, Tzu-Chiang St., Tu-Cheng Industrial District, Taipei, Taiwan, August 2010. [47] Y. Su, B. Duan, and C. Zheng: Nonlinear pid control of a six-dof parallel manipulator, IEEE Proceedings-Control Theory and Applications, 151(1), (2004), 95–102.
[48] B.M. Vinagre, Y.Q. Chen, and I. Petras: Two direct tustin discretization methods for fractional-order differentiator/integrator, Journal of the Franklin Institute, 340(5), (2003), 349–362.
[49] O. Vinogradov: Fundamentals of kinematics and dynamics of machines and mechanisms, CRC Press, 2000. [50] L. Wang, Z. Lu, X. Liu, K. Liu, and D. Zhang: Adaptive control of a parallel robot via backstepping technique, International Journal of Systems, Control and Communications, 1(3), (2009), 312–324.
[51] D.A. Winter: Biomechanics and motor control of human movement, John Wiley & Sons, 2009.
[52] R. Xu, N. Jiang, N. Mrachacz-Kersting, C. Lin, G.A. Prieto, J.C. Mo- reno, J.L. Pons, K. Dremstrup, and D. Farina: A closed-loop brain– computer interface triggering an active ankle–foot orthosis for inducing cortical neural plasticity, IEEE Transactions on Biomedical Engineering, 61(7), (2014), 2092–2101.
[53] J. Yoon, J. Ryu, and K.-B. Lim: Reconfigurable ankle rehabilitation robot for various exercises, Journal of Robotic Systems, 22(S1), (2006), S15–S33.
[54] H. Zhu, J. Doan, C. Stence, G. Lv, T. Elery, and R. Gregg: Design and validation of a torque dense, highly backdrivable powered knee-ankle orthosis, In 2017 IEEE International Conference on Robotics and Automation (ICRA), pages 504–510, IEEE, 2017.
Przejdź do artykułu

Autorzy i Afiliacje

Juan Carlos Arceo
1
Jorge Álvarez
2
Carlos Armenta
1
Jimmy Lauber
1
Sylvain Cremoux
3
Emilie Simoneau-Buessinger
1
Miguel Bernal
2

  1. Université Polytechnique Hauts-de-France, LAMIH UMR CNRS 8201, F-59313 Valenciennes, France
  2. Sonora Institute of Technology, 5 de Febrero 818 Sur, Ciudad Obregon, Sonora, Mexico
  3. Centre de Recherche Cerveau et Cognition, CNRS UMR 5549, Université de Toulouse, Toulouse 31052, France
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

In the paper positive fractional continuous-time linear systems are considered. Positive fractional systems without delays and positive fractional systems with a single delay in control are studied. New criteria for approximate and exact controllability of systems without delays as well as a relative controllability criterion of systems with delay are established and proved. Numerical examples are presented for different controllability criteria. A practical application is proposed.
Przejdź do artykułu

Bibliografia

[1] A. Abdelhakim and J. Tenreiro Machado: A critical analysis of the conformable derivative, Nonlinear Dynamics, 95 (2019), 3063–3073, DOI: 10.1007/s11071-018-04741-5.
[2] K. Balachandran, Y. Zhou and J. Kokila: Relative controllability of fractional dynamical systems with delays in control, Communications in Nonlinear Science and Numerical Simulation, 17 (2012), 3508–3520, DOI: 10.1016/j.cnsns.2011.12.018.
[3] K. Balachandran, J. Kokila, and J.J. Trujillo: Relative controllability of fractional dynamical systems with multiple delays in control, Computers and Mathematics with Apllications, 64 (2012), 3037–3045, DOI: 10.1016/j.camwa.2012.01.071.
[4] P. Duch: Optimization of numerical algorithms using differential equations of integer and incomplete orders, Doctoral dissertation, Lodz University of Technology, 2014 (in Polish).
[5] C. Guiver, D. Hodgson and S. Townley: Positive state controllability of positive linear systems. Systems and Control Letters, 65 (2014), 23–29, DOI: 10.1016/j.sysconle.2013.12.002.
[6] R.E. Gutierrez, J.M. Rosario and J.T. Machado: Fractional order calculus: Basic concepts and engineering applications, Mathematical Problems in Engineering, 2010 Article ID 375858, DOI: 10.1155/2010/375858.
[7] T. Kaczorek: Positive 1D and 2D Systems, Communications and Control Engineering, Springer, London 2002.
[8] T. Kaczorek: Fractional positive continuous-time linear systems and their reachability, International Journal of Applied Mathematics and Computer Science, 18 (2008), 223–228, DOI: 10.2478/v10006-008-0020-0.
[9] T. Kaczorek: Positive linear systems with different fractional orders, Bulletin of the Polish Academy of Sciences: Technical Sciences, 58 (2010), 453–458, DOI: 10.2478/v10175-010-0043-1.
[10] T. Kaczorek: Selected Problems of Fractional Systems Theory, Lecture Notes in Control and Information Science, 411, 2011.
[11] T. Kaczorek: Constructability and observability of standard and positive electrical circuits, Electrical Review, 89 (2013), 132–136.
[12] T. Kaczorek: An extension of Klamka’s method of minimum energy control to fractional positive discrete-time linear systems with bounded inputs, Bulletin of the Polish Academy of Sciences: Technical Sciences, 62 (2014), 227–231, DOI: 10.2478/bpasts-2014-0022.
[13] T. Kaczorek: Minimum energy control of fractional positive continuoustime linear systems with bounded inputs, International Journal of Applied Mathematics and Computer Science, 24 (2014), 335–340, DOI: 10.2478/amcs-2014-0025.
[14] T. Kaczorek and K. Rogowski: Fractional Linear Systems and Electrical Circuits, Springer, Studies in Systems, Decision and Control, 13 2015.
[15] T. Kaczorek: A class of positive and stable time-varying electrical circuits, Electrical Review, 91 (2015), 121–124. DOI: 10.15199/48.2015.05.29.
[16] T. Kaczorek: Computation of transition matrices of positive linear electrical circuits, BUSES – Technology, Operation, Transport Systems, 24 (2019), 179–184, DOI: 10.24136/atest.2019.147.
[17] A.A. Kilbas, H.M. Srivastava and J.J. Trujillo: Theory and Applications of Fractional Differential Equations, North-Holland Mathematics Studies, 204, 2006.
[18] J. Klamka: Controllability of Dynamical Systems, Kluwer Academic Publishers, 1991.
[19] T.J.Machado,V. Kiryakova and F. Mainardi: Recent history of fractional calculus, Communications in Nonlinear Science and Numerical Simulation, 6 (2011), 1140–1153, DOI: 10.1016/j.cnsns.2010.05.027.
[20] K.S. Miller and B. Ross: An Introduction to the Fractional Calculus and Fractional Differential Calculus, Villey, 1993.
[21] A. Monje, Y. Chen, B.M. Viagre, D. Xue and V. Feliu: Fractional-order Systems and Controls. Fundamentals and Applications, Springer-Verlag, 2010.
[22] K. Nishimoto: Fractional Calculus: Integrations and Differentiations of Arbitrary Order, University of New Haven Press, 1989.
[23] K.B. Oldham and J. Spanier: The Fractional Calculus, Academic Press, 1974.
[24] I. Podlubny: Fractional Differential Equations: An Introduction to Fractional Derivatives, Fractional Differential Equations, to Methods of Their Solution and Some of Their Applications, In: Mathematics in Science and Engineering, Academic Press, 1999.
[25] S.G. Samko, A.A. Kilbas and O.I. Marichev: Fractional Integrals and Derivatives: Theory and Applications, Gordan and Breach Science Publishers, 1993.
[26] J. Sabatier, O.P. Agrawal and J.A. Tenreiro Machado: Advances in Fractional Calculus, In: Theoretical Developments and Applications in Physics and Engineering, Springer-Verlag, 2007.
[27] B. Sikora: Controllability of time-delay fractional systems with and without constraints, IET Control Theory & Applications, 10 (2016), 1–8, DOI: 10.1049/iet-cta.2015.0935.
[28] B. Sikora: Controllability criteria for time-delay fractional systems with a retarded state, International Journal of Applied Mathematics and Computer Science, 26 (2016), 521–531, DOI: 10.1515/amcs-2016-0036.
[29] B. Sikora and J. Klamka: Constrained controllability of fractional linear systems with delays in control, Systems and Control Letters, 106 (2017), 9–15, DOI: 10.1016/j.sysconle.2017.04.013.
[30] B. Sikora and J. Klamka: Cone-type constrained relative controllability of semilinear fractional systems with delays, Kybernetika, 53 (2017), 370–381, DOI: 10.14736/kyb-2017-2-0370.
[31] B. Sikora: On application of Rothe’s fixed point theorem to study the controllability of fractional semilinear systems with delays, Kybernetika, 55 (2019), 675–689, DOI: 10.14736/kyb-2019-4-0675.
[32] T. Schanbacher: Aspects of positivity in control theory, SIAM J. Control and Optimization, 27 (1989), 457–475.
[33] B. Trzasko: Reachability and controllability of positive fractional discretetime systems with delay, Journal of Automation Mobile Robotics and Intelligent Systems, 2 (2008), 43–47.
[34] J. Wei: The controllability of fractional control systems with control delay, Computers and Mathematics with Applications, 64 (2012), 3153–3159, DOI: 10.1016/j.camwa.2012.02.065.
Przejdź do artykułu

Autorzy i Afiliacje

Beata Sikora
1
Nikola Matlok
1

  1. Department of Applied Mathematics, Silesian University of Technology, Kaszubska 23, 44-100 Gliwice, Poland

Abstrakt

The Bearingless Switched Reluctance Motor (BSRM) is a new technology motor, which overcomes the problems of maintenances required associated with mechanical contacts and lubrication of rotor shaft effectively. In addition, it also improves the output power developed and rated speed. Hence, the BSRM can achieve high output power and super high speed with less size and cost. It has a considerable ripple in the net-torque due to its critical non-linearity and the salient pole structures of both stator and rotor poles. The resultant torque ripple, especially in these motors, causes the more vibrations and acoustic noises will affects the levitated rotor safety also. Practically at high-speed operations, the accurate measurement of the rotor position is complicated for conventional mechanical sensors. A new square currents control with global sliding mode control based sensorless torque observer is proposed to minimize the torque ripple and achieve a smooth, robust operation without using any mechanical sensors. The proposed controller is designed based on the error between the reference and measured torque values. The sliding mode torque observer measures the torque from the actual phase voltages, currents, and look-up tables. The simulation model has been modelled to validate the proposed methodology. From the simulation outputs, it is clear that the reduction of torque ripple by the proposed method shows improved than the conventional sliding mode controller. The overall system is more robust to the external disturbances, and it also gets efficient torque profile.
Przejdź do artykułu

Autorzy i Afiliacje

Pulivarthi Nageswara Rao
1
Ramesh Devarapalli
2
ORCID: ORCID
Fausto Pedro García Márquez
3
ORCID: ORCID
G.V. Nagesh Kumar
4
Behnam Mohammadi-Ivatloo
5

  1. Department of Electrical Electronics and Communication Engineering, Gandhi Institute of Technology and Management (Deemed to be University),Visakhapatnam, 530045, Andhra Pradesh, India
  2. Department of Electrical Engineering, BITSindri, Dhanbad 828123, Jharkhand, India
  3. Ingenium Research Group, University of Castilla-La Mancha, Spain
  4. Department of EEE, JNTU Anantapur, College of Engineering, Pulivendula-516390, Andhra Pradesh, India
  5. University of Tabriz, Tabriz, Iran

Abstrakt

Affine discrete-time control periodic systems are considered. The problem of global asymptotic stabilization of the zero equilibrium of the closed-loop system by state feedback is studied. It is assumed that the free dynamic system has the Lyapunov stable zero equilibrium. The method for constructing a damping control is extended from time-invariant systems to time varying periodic affine discrete-time systems. By using this approach, sufficient conditions for uniform global asymptotic stabilization for those systems are obtained. Examples of using the obtained results are presented.
Przejdź do artykułu

Autorzy i Afiliacje

Adam Czornik
1
Evgenii Makarov
2
Michał Niezabitowski
3
Svetlana Popova
4
Vasilii Zaitsev
4

  1. Faculty of Automatic Control, Electronics and Computer Science, Silesian University of Technology, 44-100 Gliwice, Poland
  2. Institute of Mathematics, National Academy of Sciencesof Belarus, 220072 Minsk, Belarus
  3. Faculty of Automatic Control, Electronics and Computer Science,Silesian University of Technology, 44-100 Gliwice, Poland
  4. Udmurt State University, 426034 Izhevsk, Russia

Abstrakt

In this work, we have developed a new 4-D dynamical system with hyperchaos and hidden attractor. First, by introducing a feedback input control into the 3-D Ma chaos system (2004), we obtain a new 4-D hyperchaos system with no equilibrium point. Thus, we derive a new hyperchaos system with hidden attractor. We carry out an extensive bifurcation analysis of the newhyperchaos model with respect to the three parameters.We also carry out probability density distribution analysis of the new hyperchaotic system. Interestingly, the new nonlinear hyperchaos system exhibits multistability with coexisting attractors.Next,we discuss global hyperchaos selfsynchronization for the newhyperchaos system via Integral Sliding Mode Control (ISMC). As an engineering application, we realize the new 4-D hyperchaos system with an electronic circuit via MultiSim. The outputs of the MultiSim hyperchaos circuit show good match with the numerical MATLAB plots of the hyperchaos model. We also analyze the power spectral density (PSD) of the hyperchaos of the state variables using MultiSim.
Przejdź do artykułu

Autorzy i Afiliacje

Sundarapandian Vaidyanathan
1
Shaobo He
2
Aceng Sambas
3

  1. School of Electrical and Computing, Vel Tech University, 400 Feet Outer Ring Road, Avadi, Chennai-600092, Tamil Nadu, India
  2. School of Physics and Electronics, Central South University, Changsha, 410083, China
  3. Department of Mechanical Engineering, Universitas Muhammadiyah Tasikmalaya, Tasikmalaya 46196, West Java, Indonesia

Abstrakt

The article presents the algorithm that enables adaptive determination of the amplification coefficient in the filter equation provided by Kalman. The method makes use of an estimation error, which was defined for this purpose, and its derivative to determine the direction of correction changes of the gain vector. This eliminates the necessity to solve Riccati equation, which causes reduction of the method computational complexity. The experimental studies carried out using the proposed approach relate to the estimation of state coordinates describing river pollution using the BOD (biochemical oxygen demand) and DO (dissolved oxygen) indicators).The acquired results indicate that the suggested method does better estimations than the Kalman filter. Two indicators were used to measure the quality of estimates: the Root Mean Squared Error (RMSE) and the Mean Percentage Error (MPE).
Przejdź do artykułu

Autorzy i Afiliacje

Tadeusz Kwater
1
Przemysław Hawro
1
Jacek Bartman
2
Damian Mazur
3

  1. Institute of Technical Engineering, The State University of Technology and Economics in Jaroslaw, Czarnieckiego 16, 37-500 Jaroslaw, Poland
  2. Faculty of Natural Sciences, University of Rzeszow, Pigonia 1, 35-959 Rzeszów, Poland
  3. Faculty of Electrical and Computer Engineering, Rzeszow University of Technology, 35-959 Rzeszów, Pola 2, Poland
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

It is shown how a stability test, alternative to the classical Routh test, can profitably be applied to check the presence of polynomial roots inside half-planes or even sectors of the complex plane. This result is obtained by exploiting the peculiar symmetries of the root locus in which the basic recursion of the test can be embedded. As is expected, the suggested approach proves useful for testing the stability of fractional-order systems. A pair of examples show how the method operates. It is believed that the suggested geometric approach can also be of some didactic value in introducing basic control-system tools to engineering students.
Przejdź do artykułu

Bibliografia

[1] J.J. Anagnost, C.A. Desoer, and R.J. Minnichelli: Graphical stability robustness tests for linear time-invariant systems: Generalizations of Kharitonov’s stability theorem, Proceedings of the 27th IEEE Conference on Decision and Control (1988), 509–514.
[2] A.T. Azar, A.G. Radwan, and S.Vaidyanathan, Eds.: Mathematical Techniques of Fractional Order Systems, Elsevier, Amsterdam, The Netherlands, 2018.
[3] R. Becker, M. Sagraloff. V. Sharma, J. Xu, and C. Yap: Complexity analysis of root clustering for a complex polynomial, Proceedings of the 41th ACM International Symposium on Symbolic and Algebraic Computation, (2016), 71–78.
[4] T.A. Bickart and E.I. Jury: The Schwarz–Christoffel transformation and polynomial root clustering, IFAC Proceedings 11(1), (1978), 1171–1176.
[5] Y. Bistritz: Optimal fraction–free Routh tests for complex and real integer polynomials, IEEE Transactions on Circuits and Systems I: Regular Papers 60(9), (2013), 2453–2464.
[6] D. Casagrande, W. Krajewski, and U. Viaro: On polynomial zero exclusion from an RHP sector, Proceedings of the 23rd IEEE International Conference on Methods and Models in Automation and Robotics, (2018), 648–653.
[7] D. Casagrande, W. Krajewski, and U. Viaro: Fractional-order system forced-response decomposition and its application, In Mathematical Techniques of Fractional Order Systems, A.T. Azar, A.G. Radwan, and S. Vaidyanathan, Eds., Elsevier, Amsterdam, The Netherlands, 2018.
[8] A. Cohn: Über die Anzahl der Wurzeln einer algebraischen Gleichung in einem Kreise, Mathematische Zeitschrift 14, (1922), 110–148, DOI: 10.1007/BF01215894.
[9] Ph. Delsarte and Y. Genin: The split Levinson algorithm, IEEE Transactions on Acoustics, Speech, and Signal Processing ASSP, 34(3), (1986), 470–478.
[10] Ph. Delsarte and Y. Genin: On the splitting of classical algorithms in linear prediction theory, IEEE Transactions onAcoustics, Speech, and Signal Processing ASSP, 35(5), (1987), 645–653.
[11] A. Doria–Cerezo and M. Bodson: Root locus rules for polynomials with complex coefficients, Proceedings of the 21st Mediterranean Conference on Control and Automation, (2013), 663–670.
[12] A. Doria–Cerezo and M. Bodson: Design of controllers for electrical power systems using a complex root locus method, IEEE Transactions on Industrial Electronics, 63(6), (2016), 3706–3716.
[13] A. Ferrante, A. Lepschy, and U. Viaro: A simple proof of the Routh test, IEEE Transactions on Automatic Control, AC-44(1), (1999), 1306–1309.
[14] A. Hurwitz: Ueber die Bedingungen, unter welchen eine Gleichung nur Wurzeln mit negativen reellen Theilen besitzt, Mathematiche Annalen Band, 46 (1895), 273–284.
[15] R. Imbach and V.Y. Pan: Polynomial root clustering and explicit deflation, arXiv:1906.04920v2.
[16] E.I. Jury and J. Blanchard: A stability test for linear discrete systems in table form, I.R.E. Proceedings, 49(12), (1961), 1947–1948.
[17] T. Kaczorek: Selected Problems of Fractional Systems Theory, Lecture Notes in Control and Information Sciences, 411, Springer, Berlin, Germany, 2011.
[18] W. Krajewski, A. Lepschy, G.A. Mian, and U. Viaro: A unifying frame for stability-test algorithms for continuous-time systems, IEEE Transactions on Circuits and Systems, CAS-37(2), (1990), 290–296.
[19] W. Krajewski, A. Lepschy, G.A. Mian, and U. Viaro: Common setting for some classical z-domain algorithms in linear system theory, International Journal of Systems Science, 21(4), (1990), 739–747.
[20] W. Krajewski and U. Viaro: Root locus invariance: Exploiting alternative arrival and departure points, IEEE Control Systems Magazine, 27(1), (2007), 36–43.
[21] B.C. Kuo: Automatic Control Systems (second ed.), (1967), Prentice-Hall, Englewood Cliffs, NJ, USA.
[22] P.K.Kythe: Handbook of Conformal Mappings and Applications, Chapman and Hall/CRC Press, London, UK, 2019.
[23] A. Lepschy, G.A. Mian, and U. Viaro: A stability test for continuous systems, Systems and Control Letters, 10(3), (1988), 175–179.
[24] A. Lepschy, G.A. Mian, and U. Viaro: A geometrical interpretation of the Routh test, Journal of the Franklin Institute, 325(6), (1988), 695–703.
[25] A. Lepschy, G.A. Mian, and U. Viaro: Euclid-type algorithm and its applications, International Journal of Systems Science, 20(6), (1989), 945– 956.
[26] A. Lepschy, G.A. Mian, andU. Viaro: Splitting of some s-domain stabilitytest algorithms, International Journal of Control, 50(6), (1989), 2237–2247.
[27] A. Lepschy, G.A. Mian, and U. Viaro: An alternative proof of the Jury- Marden stability criterion, Control and Computers, 18(3), (1990), 70–73.
[28] A. Lepschy, G.A. Mian, and U. Viaro: Efficient split algorithms for continuous-time and discrete-time systems, Journal of the Franklin Institute, 328(1), (1991), 103–121.
[29] A. Lepschy and U. Viaro: On the mechanism of recursive stability-test algorithms, International Journal of Control, 58(2), (1993), 485–493.
[30] A. Lepschy and U. Viaro: Derivation of recursive stability-test procedures, Circuits, Systems, and Signal Processing, 13(5), (1994), 615–623.
[31] S. Liang, S.G. Wang, and Y. Wang: Routh-type table test for zero distribution of polynomials with commensurate fractional and integer degrees, Journal of the Franklin Institute, 354(1), (2017), 83–104.
[32] A. Lienard and M.H. Chipart: Sur le signe de la partie réelle des racines d’une équation algébrique, Journal of Mathématiques Pures et Appliquée, 10(6), (1914), 291–346.
[33] M. Marden: Geometry of Polynomials [2nd ed.], American Mathematical Society, Providence, RI, USA, 1966.
[34] I. Petras: Stability of fractional-order systems with rational orders: a survey, Fractional Calculus & Applied Analysis, 12(3), (2009), 269–298.
[35] A.G. Radwan, A.M. Soliman, A.S. Elwakil, and A. Sedeek: On the stability of linear systems with fractional order elements, Chaos, Solitons and Fractals, 40(5), (2009), 2317–2328.
[36] E.J. Routh: A Treatise on the Stability of a Given State of Motion, Particularly Steady Motion, Macmillan, London, UK, 1877.
[37] J. Schur: Über Potenzreihen, die im Innern des Einheitskreises beschränkt sind, Journal für die reine und angewandte Mathematik, 147, (1917) 205– 232, DOI: 10.1515/crll.1917.147.205.
[38] R.Tempo: A Simple Test for Schur Stability of a Diamond of Complex Polynomials, Proceedings of the 28th IEEE Confewrence on Decision and Control (1989), 1892–1895.
[39] U. Viaro: Stability tests revisited, In A Tribute to Antonio Lepschy, G. Picci and M.E. Valcher, Eds., Edizioni Libreria Progetto, Padova, Italy, pp. 189– 199, 2007.
[40] U. Viaro: Twenty–Five Years of Research with Antonio Lepschy, Edizioni Libreria Progetto, Padova, Italy, 2009.
[41] U. Viaro (preface by W. Krajewski): Essays on Stability Analysis and Model Reduction, Polish Academy of Sciences, Warsaw, Poland, 2010.
[42] R.S. Vieira: Polynomials with symmetric zeros, arXiv:1904.01940v1 [math.CV], 2019.
Przejdź do artykułu

Autorzy i Afiliacje

Daniele Casagrande
1
Wiesław Krajewski
2
Umberto Viaro
1

  1. Polytechnic Department of Engineering and Architecture, University of Udine, via delle Scienze 206, 33100 Udine, Italy
  2. Systems Research Institute, Polish Academy of Sciences, ul. Newelska 6, 01–447 Warsaw, Poland

Abstrakt

In the paper approximate controllability of second order infinite dimensional system with damping is considered. Applying linear operators in Hilbert spaces general mathematical model of second order dynamical systems with damping is presented. Next, using functional analysis methods and concepts, specially spectral methods and theory of unbounded linear operators, necessary and sufficient conditions for approximate controllability are formulated and proved. General result may be used in approximate controllability verification of second order dynamical system using known conditions for approximate controllability of first order system. As illustrative example using Green function approach approximate controllability of distributed dynamical system is also discussed.
Przejdź do artykułu

Autorzy i Afiliacje

Jerzy Klamka
1
Asatur Zh. Khurshudyan
2

  1. Department of Measurements and Control Systems, Silesian University of Technology, Gliwice, Poland
  2. Institute of Mechanics, NAS of Armenia

Abstrakt

The paper formulates and formalises a method for selecting parameters of the tuned mass damper (TMD) for primary systems with many degrees of freedom. The method presented uses the properties of positive rational functions, in particular their decomposition, into simple fractions and continued fractions, which is used in the mixed method of synthesis of vibrating mechanical systems. In order to formulate a method of tuning a TMD, the paper discusses the basic properties of positive rational functions. The main assumptions of the mixed synthesis method is presented, based on which the general method of determining TMD parameters in the case of systems with many degrees of freedom was formulated. It has been shown that a tuned mass damper suppresses the desired resonance zone regardless of where the excitation force is applied. The advantages of the formulated method include the fact of reducing several forms of the object’s free vibration by attaching an additional system with the number of degrees of freedom corresponding to the number of resonant frequencies reduced. In addition, the tuned mass damper determined in the case of excitation force applied at a single point can be attached to any element of the inertial primary system without affecting the reduction conditions in this way. It results directly from the methodology formalised in the paper. As part of the paper, numerical calculations were performed regarding the tuning of the TMD to the first form of free vibration of a system with 3 degrees of freedom. The parameters determined were subjected to analysis and verification of the correctness of the calculations carried out. For the considered case of a system with 3 degrees of freedom together with a TMD, time responses of displacement, from each floor, were generated to excitation induced by a harmonic force equal to the first form of vibration of the basic system. In addition, in the case of the parameters obtained, the response of the inertial element system to which the TMD was attached to random white noise excitation was determined.
Przejdź do artykułu

Autorzy i Afiliacje

Andrzej Dymarek
1
Tomasz Dzitkowski
1

  1. Departament of Engineering Processes Automation and Integrated Manufacturing Systems, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland

Abstrakt

Multi-criteria decision making (MCDM) technique and approach have been a trending topic in decision making and systems engineering to choosing the probable optimal options. The primary purpose of this article is to develop prioritized operators to multi-criteria decision making (MCDM) based on Archimedean t-conorm and t-norms (At-CN&t-Ns) under interval-valued dual hesitant fuzzy (IVDHF) environment. A new score function is defined for finding the rank of alternatives in MCDM problems with IVDHF information based on priority levels of criteria imposed by the decision maker. This paper introduces two aggregation operators: At-CN&t-N-based IVDHF prioritized weighted averaging (AIVDHFPWA), and weighted geometric (AIVDHFPWG) aggregation operators. Some of their desirable properties are also investigated in details. A methodology for prioritization-based MCDM is derived under IVDHF information. An illustrative example concerning MCDM problem about a Chinese university for appointing outstanding oversea teachers to strengthen academic education is considered. The method is also applicable for solving other real-life MCDM problems having IVDHF information.
Przejdź do artykułu

Autorzy i Afiliacje

Arun Sarkar
1
Animesh Biswas
2

  1. Department of Mathematics, Heramba Chandra College, Kolkata – 700029, India
  2. Department of Mathematics, University of Kalyani, Kalyani – 741235, India

Instrukcja dla autorów

Each paper submitted is subject to a review procedure, and the publication decision is based on reviers' comments on the paper. To avoid delay, please prepare the manuscript carefully following the suggestions listed below.

Computer file of the manuscript may be sent by e-mail to the address of Assistant Editor or acs@polsl.pl. Preferred text processors is TeX or LaTeX, however Word and other processors are also acceptable. In case of difficulties in processing the text, the author may be asked to supply the ASCII export of the original file.

Manuscripts sent via ordinary post should be typewritten double-spaced on one side of a standard size (A4) paper. Left side margin should be approximately 3cm (1.2'') wide. Each page should contain approximately 30 lines of 60 characters each. The manuscript including figures and tables together with their captions should be submitted. A separate signed letter giving the Author's preferred address for correspondence and return of proofs should be enclosed. Manuscript is the basis for editorial work.

First page should include the title of the paper, first name(s) and surname(s) of the Author(s), and a short summary (abstract), not longer than 20 lines.

Keywords of max. 5 - 7 items should be included in manuscript.

Numeration. All chapters, including the introduction, should be numbered in arabic numerals. Equations, tables and figures as well as theorems, corollaries, examples etc., should be numbered consecutively throughout the paper in arabic numerals, except in appendices. Appendices should be numbered with capital letters, and numeration should be closed within individual appendices.

If the manuscript is not prepared with TeX, mathematical expressions should be carefully written so as not to arouse confusion. Care should be taken that subscripts and superscripts are easily readable.

Tables and figures should be placed as desired by the Author within the text or on separate sheets with their suggested location indicated by the number of table or figure in the text. Figures, graphs and pictures (referred to as Fig. in the manuscript) should be numbered at the beginning of their caption following the figure. All figures should be prepared as PostScript EPS files or LaTeX picture files; in special cases, bitmaps of figure are also acceptable. The numbers and titles of tables should be placed above the main body of each table.

References should be listed alphabetically at the end of the manuscript. They should be numbered in ascending order and the numbers should be inserted in square brackets. References should be organized as follows. First initial(s), surname(s) of the author(s) and title of article or book. Then, for papers: title of periodical or collective work, volume number (year of issue), issue number, and numbers of the first and the last page; for books: publisher's name(s), place and year of issue. Example:

  1. R. E. Kalman: Mathematical description of linear dynamical system. SIAM J. Control. 1(2), (1963), 152-192.
  2. F. C. Shweppe: Uncertain dynamic systems. Prentice-Hall, Englewood Cliffs, N.J. 1970.


Please, give full titles of journals; only common words like Journal, Proceedings, Conference, etc. may be abbreviated ( to J., Proc., Conf., ... respectively). References to publications in the body of the manuscript should be indicated by the numbers of the adequate references in square brackets. When the paper is set in TeX the preferable form of preparing references is Bib TeX bib database.

Footnotes should be placed in the manuscript, beginning with "Received..." (date to be filled in by Editor), the author's institutional affiliation and acknowledgement of financial support,

Ta strona wykorzystuje pliki 'cookies'. Więcej informacji