Obiekt

Tytuł: Simulations of the AP1000-based reactor core with SERPENT computer code

Tytuł czasopisma:

Archive of Mechanical Engineering

Rocznik:

2018

Wolumin:

vol. 65

Numer:

No 3

Zakres:

295-325

Opis:

Archive of Mechanical Engineering is an international journal publishing works of wide significance, originality and relevance in most branches of mechanical engineering. The journal is peer-reviewed and is published both in electronic and printed form. Archive of Mechanical Engineering publishes original papers which have not been previously published in other journal, and are not being prepared for publication elsewhere.

Archive of Mechanical Engineering is an Open Access journal. The journal does not have article processing charges (APCs) nor article submission charges.

Original papers on the following topics are preferred:

  • Mechanics of Solids and Structures,
  • Fluid Dynamics,
  • Thermodynamics, Heat Transfer and Combustion,
  • Machine Design,
  • Computational Methods in Mechanical Engineering,
  • Robotics, Automation and Control,
  • Mechatronics and Micro-mechanical Systems,
  • Aeronautics and Aerospace Engineering,
  • Heat and Power Engineering.

All submissions to the AME should be made electronically via Editorial System - an online submission and peer review system at: https://www.editorialsystem.com/ame
More detailed instructions for Authors can be found there.

IMPACT FACTOR 2022: 0.7

CiteScore 2021: 1.7
SCImago Journal Rank ( SJR) 2021: 0.22
Source Normalized Impact per Paper ( SNIP) 2021: 0.69


Abstrakt:

The paper presents the core design, model development and results of the neutron transport simulations of the large Pressurized Water Reactor based on the AP1000 design.The SERPENT 2.1.29 Monte Carlo reactor physics computer code with ENDF/BVII and JEFF3.1.1 nuclear data libraries was applied. The full-core 3D models were developed according to the available Design Control Documentation and the literature. Criticality simulations were performed for the core at the Beginning of Life state for Cold Shutdown, Hot Zero Power and Full Power conditions. Selected core parameters were investigated and compared with the design data: effective multiplication factors, boron concentrations, control rod worth, reactivity coefficients and radial power distributions. Acceptable agreement between design data and simulations was obtained, confirming the validity of the model and applied methodology.

Kontakt:

ARCHIVE OF MECHANICAL ENGINEERING

Editorial Office:

Institute of Aeronautics and Applied Mechanics, Warsaw University of Technology

Nowowiejska 24, Room 132, 00-665 Warsaw, Poland

Phone:  (+48) 22 234 7448, fax: (+48) 22 628 25 87,

E-mail: ame.eo@meil.pw.edu.pl

https://www.editorialsystem.com/ame

https://journals.pan.pl/ame

Redaktorzy:

Editor-in-Chief

Prof. Marek Wojtyra, Warsaw University of Technology, Poland

 

Editorial Board

Prof. Janusz T. Cieśliński, Gdańsk University of Technology, Poland

Prof. Antonio Delgado, LSTM University of Erlangen-Nuremberg, Germany

Prof. Peter Eberhard, University of Stuttgart, Germany

Prof. Krzysztof Fidkowski, University of Michigan, United States

Prof. Janusz Frączek, Warsaw University of Technology, Poland

Prof. Zbigniew Kowalewski, Institute of Fundamental Technological Research, Polish Academy of Sciences, Poland

Prof. Maciej Marek, Czestochowa University of Technology, Poland

Prof. Zenon Mróz, Institute of Fundamental Technological Research, Polish Academy of Sciences, Poland

Dr. Andrzej F. Nowakowski, The University of Sheffield, United Kingdom

Prof. Tomasz Wiśniewski, Warsaw University of Technology, Poland

Prof. Günter Wozniak, Chemnitz University of Technology, Germany

 

Assistant to the Editor

Małgorzata Broszkiewicz, Warsaw University of Technology, Poland

 

Editorial Advisory Board

Prof. Alberto Carpinteri, Politecnico di Torino, Italy

Prof. Feng Gao, Shanghai Jiao Tong University, P.R. China

Prof. Jerzy Maciej Floryan, The University of Western Ontario, Canada

Prof. Emmanuel E. Gdoutos, Democritus University of Thrace, Greece

Prof. Gregory Glinka, University of Waterloo, Ontario, Canada

Prof. Andrius Marcinkevicius, Vilnius Gedeminas Technical University, Lithuania

Prof. Manuel José Moreira De Freitas, Instituto Superior Tecnico, Portugal

Prof. Andrzej Neimitz, Kielce University of Technology, Poland

Prof. Thierry Palin-Luc, Arts et Métiers ParisTech, Institut Carnot Arts, France

Prof. Andre Pineau, Centre des Matériaux, Ecole des Mines de Paris, France

Prof. Narayanaswami Ranganathan, LMR, Ecole Polytechnique de l'Université de Tours, France

Prof. Andrzej J. Nowak, Silesian University of Technology, Poland

Prof. Jerzy Sąsiadek, Carleton University, Canada

Prof. Adelia Sequeira, Technical University of Lisbon, Portugal,

Prof. Jacek Szumbarski, Warsaw University of Technology, Poland

Prof. Edmund Wittbrodt, Gdańsk University of Technology, Poland

Prof. Jens Wittenburg, Karlsruhe Institute of Technology, Germany

Prof. Stanisław Wojciech, University of Bielsko-Biała, Poland

 

Language Editor

Lech Śliwa, Institute of Physiology and Pathology of Hearing, Warsaw, Poland

  

Instrukcja dla autorów:

About the Journal
Archive of Mechanical Engineering is an international journal publishing works of wide significance, originality and relevance in most branches of mechanical engineering. The journal is peer-reviewed and is published both in electronic and printed form. Archive of Mechanical Engineering publishes original papers which have not been previously published in other journal, and are not being prepared for publication elsewhere. The publisher will not be held legally responsible should there be any claims for compensation. The journal accepts papers in English.

Archive of Mechanical Engineering is an Open Access journal. The journal does not have article processing charges (APCs) nor article submission charges.

Original high quality papers on the following topics are preferred:

  • Mechanics of Solids and Structures,
  • Fluid Dynamics,
  • Thermodynamics, Heat Transfer and Combustion,
  • Machine Design,
  • Computational Methods in Mechanical Engineering,
  • Robotics, Automation and Control,
  • Mechatronics and Micro-mechanical Systems,
  • Aeronautics and Aerospace Engineering,
  • Heat and Power Engineering.

All submissions to the AME should be made electronically via Editorial System - an online submission and peer review system at: https://www.editorialsystem.com/ame

More detailed instructions for Authors can be found there.

Open Access:

Archive of Mechanical Engineering jest czasopismem wydawanym w wolnym dostępie na licencji CC BY 4.0. <a href=" https://creativecommons.org/licenses/by/4.0/"> https://creativecommons.org/licenses/by/4.0/</a></p>Archive of Mechanical Engineering is an open access journal with all content available with no charge in full text version. The journal content is available under the licencse CC BY 4.0 <a href=" https://creativecommons.org/licenses/by/4.0/"> https://creativecommons.org/licenses/by/4.0/</a>.

Wydawca:

Polish Academy of Sciences, Committee on Machine Building

Identyfikator:

oai:journals.pan.pl:108626 ; DOI: 10.24425/124484 ; e-ISSN 2300-1895

Polityka Open Access:

Archive of Mechanical Engineering is an open access journal with all content available with no charge in full text version.


The journal content is available under the license CC BY 4.0 https://creativecommons.org/licenses/by/4.0/.

Kolekcje, do których przypisany jest obiekt:

Data ostatniej modyfikacji:

22 gru 2025

Data dodania obiektu:

29 sie 2018

Liczba wyświetleń treści obiektu:

$number.toString().replaceAll("[0-9](?=(?:[0-9]{3})+(?![0-9]))", "$0 ")

Liczba wyświetleń treści obiektu w formacie PDF

1710

Wszystkie dostępne wersje tego obiektu:

https://journals.pan.pl/publication/124484

Wyświetl opis w formacie RDF:

RDF

Wyświetl opis w formacie OAI-PMH:

OAI-PMH

Nazwa wydania Data
1 22 gru 2025

Obiekty

Podobne
×

Cytowanie

Styl cytowania: $citations.get(0)

Ta strona wykorzystuje pliki 'cookies'. Więcej informacji