Modelling and experimental investigation of waste tyre pyrolysis process in a laboratory reactor

Journal title

Chemical and Process Engineering




vol. 38


No 3



waste tyres ; pyrolysis ; kinetics ; CFD

Divisions of PAS

Nauki Techniczne




Polish Academy of Sciences Committee of Chemical and Process Engineering




Artykuły / Articles


DOI: 10.1515/cpe-2017-0034 ; ISSN 2300-1925 (Chemical and Process Engineering)


Chemical and Process Engineering; 2017; vol. 38; No 3; 445-454


Queck (2012), modeling of rubber tire pyrolysis Pyrolysis, Mathematical Anal Appl, 95, ; Cherbański (2016), procesu pirolizy zużytych opon samochodowych w reaktorze laboratoryjnym, Chem, 16, 1. ; Aylón (2010), Waste tyre pyrolysis : Modelling of a moving bed reactor, Waste Manage, 30, 2530, ; Lam (2012), CFD study on fluidized bed pyrolyzers, Chem Eng Trans, 29, 661. ; Olazar (2008), Kinetic modelling of tyre pyrolysis in a conical spouted bed reactor Pyrolysis, Anal Appl, 81, ; Bianchi (2014), Preliminary design and numerical analysis of a scrap tires pyrolysis system, Energy, 111, ; Mtui (2013), CFD modeling of devolatilization and combustion of shredded tires and pine wood in rotary cement kilns, Energy Engineering, 1, ; Antoniou (2013), Features of an efficient and environmentally attractive used tyres pyrolysis with energy and material recovery Renewable Sustainable, Energy Rev, 20, 539, ; Yang (1995), Heat transfer mass transfer and kinetics study of the vacuum pyrolysis of a large used tire particle, Chem Eng Sci, 1909, ; Machniewski (2016), procesu pirolizy odpadów gumowych in Polish, Chem, 28, 1. ; Aylón (2005), Assessment of tire devolatilization kinetics Pyrolysis, Anal Appl, 259, ; Aylón (2010), a Valorisation of waste tyre by pyrolysis in a moving bed reactor, Waste Manage, 30, 1220, ; Niksiar (2014), modeling of waste plastic pyrolysis in conical spouted beds Heat mass and momentum transport Pyrolysis, Mathematical J Anal Appl, 110, 66, ; Kaminsky (2009), Feedstock recycling of synthetic and natural rubber by pyrolysis in a fluidized bed Pyrolysis, Anal Appl, 85, ; Miranda (2013), Pyrolysis of rubber tyre wastes kinetic study, Fuel, 103, ; Lopez (2010), pyrolysis of waste tires by continuously feeding into a conical spouted bed reactor, Vacuum Ind Eng Chem Res, 49,

Editorial Board

Editorial Board

Ali Mesbah, UC Berkeley, USA ORCID logo0000-0002-1700-0600

Anna Gancarczyk, Institute of Chemical Engineering, Polish Academy of Sciences, Poland ORCID logo0000-0002-2847-8992

Anna Trusek, Wrocław University of Science and Technology, Poland ORCID logo0000-0002-3886-7166

Bettina Muster-Slawitsch, AAE Intec, Austria ORCID logo0000-0002-5944-0831

Daria Camilla Boffito, Polytechnique Montreal, Canada ORCID logo0000-0002-5252-5752

Donata Konopacka-Łyskawa, Gdańsk University of Technology, Poland ORCID logo0000-0002-2924-7360

Dorota Antos, Rzeszów University of Technology, Poland ORCID logo0000-0001-8246-5052

Evgeny Rebrov, University of Warwick, UK ORCID logo0000-0001-6056-9520

Georgios Stefanidis, National Technical University of Athens, Greece ORCID logo0000-0002-4347-1350

Ireneusz Grubecki, Bydgoszcz Univeristy of Science and Technology, Poland ORCID logo0000-0001-5378-3115

Johan Tinge, Fibrant B.V., The Netherlands ORCID logo0000-0003-1776-9580

Katarzyna Bizon, Cracow University of Technology, Poland ORCID logo0000-0001-7600-4452

Katarzyna Szymańska, Silesian University of Technology, Poland ORCID logo0000-0002-1653-9540

Marcin Bizukojć, Łódź University of Technology, Poland ORCID logo0000-0003-1641-9917

Marek Ochowiak, Poznań University of Technology, Poland ORCID logo0000-0003-1543-9967

Mirko Skiborowski, Hamburg University of Technology, Germany ORCID logo0000-0001-9694-963X

Nikola Nikacevic, University of Belgrade, Serbia ORCID logo0000-0003-1135-5336

Rafał Rakoczy, West Pomeranian University of Technology, Poland ORCID logo0000-0002-5770-926X

Richard Lakerveld, Hong Kong University of Science and Technology, Hong Kong ORCID logo0000-0001-7444-2678

Tom van Gerven, KU Leuven, Belgium ORCID logo0000-0003-2051-5696

Tomasz Sosnowski, Warsaw University of Technology, Poland ORCID logo0000-0002-6775-3766