The Cracow districts have the status of auxiliary self-governing units within this city and, generally should be communities of residents living in particular parts of the city, close to them, in which they implement their daily practices. In theer article, the authors, by examining the sense of belonging to the district, undertook to identify its perception by residents and relations between the residents and their auxiliary units, on the example of two such districts this of VIII Dębniki and X Swoszowice. Attitudes of their residents towards self-governing districts were identified on the basis of 1141 questionnaires, obtaining during surveys conducted in 2017. The authors have found relatively weak relations of residents with their auxiliary units, as evidenced by small involvement in initiatives taken for the benefit of this districts. The analysis, however, showed also considerable differences in the detailed assessment of the attitudes of residents at the level of their division according to their age groups, period of the residence, as well as to the type of housing a single-family, multi-family or mixed ones.

Gothenburg is the second-largest city in Sweden, capital of Västra Götaland County Region. It is situated on the west coast of Sweden with the port area located along the Göta Älv River. Due to economic restructuring, waterfront redevelopment emerges as an attractive option to boost economic growth of the city. The aim of this paper is to shed light on conditions of the transformation process of two neighboring areas: Frihamnen and Ringön. Publicly initiated and privately executed waterfront redevelopment in Gothenburg transforms industrial grounds into residential and service oriented areas in Eriksberg, Lindholmen and Frihamnen. The collaborative process of a “developer dialogue” crafts a redevelopment in a consistent way with taking into consideration city’s long-term planning strategy, specifi c needs and opportunities of the neighbourhoods, but also market and fi nancial realities of development community. Another example is a slow and spontaneous transformation of post-industrial areas in Ringön, where still active small industrial fi rms, services, cultural and artistic initiatives take place in the close proximity to the city centre. Results show the waterfront transformation attracts “developers’ dialogue” giving the opportunity to build a coherence for spatial, environmental and socio-economic development. Yet fragmented redevelopment of brownfi eld areas strengthen polarization between dynamic and carefully planned Frihamnen and spontaneously growing Ringön. This paper contributes to the knowledge on the complexity of urban post-industrial transformation.

The revitalization of brownfi elds and post-industrial facilities is a long-term and multistage process. In the first stage of revitalization, it is important to assess the material, emotional and utilitarian value of the preserved cultural heritage. On the example of a revitalization project that has been ongoing since 1996, the former areas of the Gdańsk Shipyard, where the remains of the Imperial Shipyard and Schichau Shipyard are located, the process of formulating the value of the preserved cultural material heritage has been presented. The impact of this process on the subsequent stages of the revitalization of the Young City in Gdańsk was also presented. Gdańsk Shipyard is the cradle of Solidarity, so the emotional value associated with the events accompanying the creation of the Solidarity movement was considered to be the dominant one. Only two objects were entered in the register of monuments; BHP Hall and Solidarity Square (Plac Solidarności). When the Local Development Plan has been passed many investments have begun by various investors without comprehensive integrated activities. The demolition of the preserved halls and the dismantling of shipyard equipment began. This caused that in 2015 the uniqueness of the survived post-industrial complex, qualifying it for inclusion in the World Heritage list, was appreciated. In 2018, the Provincial Pomeranian Monument’s Conservator began the procedure of entry of the preserved objects to the register of monuments. This resulted in the suspension of all investments that commenced legally in the area covered by the proceedings. Lack of proper assessment of the cultural value of material heritage at the stage of preparing the revitalization process led to the loss of part of this heritage and caused increase of the investment activities risk in this area.

The literature is undisputed regarding the impact of mental health on public health, and there has been an increase in the use of primary healthcare, in particular, the consultations of general practitioners (GPs), with issues at this level. In the literature on the subject, the psychological intervention has been indicated as a positive factor in reversing this trend, and it is in this context that the present study was developed. We intend to explore the differences in the number of GP consultations prior to and after the psychology consultation in a Primary Healthcare Centre (PHC). To this end, data from 845 healthcare center users were collected between June 2004 and September 2014. Student’s t-test and mixed analysis of variance (ANOVA) was performed. The results point out a decrease in the number of GP consultations in the period subsequent to the first psychological consultation. We discuss that psychological intervention seems to have a positive effect, not only in improving the mental health of the population but also in the containment of costs in the health sector. The importance of the role of psychology in PHC was assumed.

Spectroscopy has become one of the most used non-invasive methods to detect plant diseases before symptoms are visible. In this study it was possible to characterize the spectral variation in leaves of Solanum lycopersicum L. infected with Fusarium oxysporum during the incubation period. It was also possible to identify the relevant specific wavelengths in the range of 380–1000 nm that can be used as spectral signatures for the detection and discrimination of vascular wilt in S. lycopersicum. It was observed that inoculated tomato plants increased their reflectance in the visible range (Vis) and decreased slowly in the near infrared range (NIR) measured during incubation, showing marked differences with plants subjected to water stress in the Vis/NIR. Additionally, three ranges were found in the spectrum related to infection by F. oxysporum (510–520 nm, 650–670 nm, 700–750 nm). Linear discriminant models on spectral reflectance data were able to differentiate between tomato varieties inoculated with F. oxysporum from healthy ones with accuracies higher than 70% 9 days after inoculation. The results showed the potential of reflectance spectroscopy to discriminate plants inoculated with F. oxysporum from healthy ones as well as those subjected to water stress in the incubation period of the disease.

Many precision devices, especially measuring devices, must maintain their technical parameters in variable ambient conditions, particularly at varying temperatures. Examples of such devices may be super precise balances that must keep stability and accuracy of the readings in varying ambient temperatures. Due to that fact, there is a problem of measuring the impact of temperature changes, mainly on geometrical dimensions of fundamental constructional elements of these devices. In the paper a new system for measuring micro-displacements of chosen points of a constructional element of balance with a resolution of single nanometres and accuracy at a level of fractions of micrometres has been proposed.

The aim of this study was to investigate the effect of the addition of fungal solid-state fermented product (FP) enriched with gamma-linolenic acid (GLA) and β-carotene to feed on the haematological and immunological parameters of broiler chickens. Eighty 1-day-old COBB 500 broiler chickens were divided into two groups. The control group was fed with basic diets and chickens of the experimental group received 10% addition of FP, while the amount of basic diet was reduced. FP was produced during a solid-state fermentation (SSF) process using Umbellopsis isabellina CCF2412 as a producer of GLA and β-carotene. After 38 days of feeding, blood samples were collected and analyzed. Lower total and LDL-cholesterol values were measured in blood samples of the experimental animals (p<0.05). However, the triacylglycerol content was higher in the experimental group (p<0.05). Significantly higher levels of hematocrit and hemoglobin, and lower eosinophil and basophil content in the experimental group were recorded (p<0.05). The experimental group showed higher numbers of B lymphocytes and greater phagocytic capacity (p<0.05). The results indicate that a fermented product produced by SSF, using the fungal strain Umbellopsis isabellina, is a good source of GLA and β-carotene, which can influence the biochemical, hematological and immunological parameters of broiler chickens.

Among all control methods for induction motor drives, Direct Torque Control (DTC) seems to be particularly interesting being independent of machine rotor parameters and requiring no speed or position sensors. The DTC scheme is characterized by the absence of PI regulators, coordinate transformations, current regulators and PWM signals generators. In spite of its simplicity, DTC allows a good torque control in steady state and transient operating conditions to be obtained. However, the presence of hysteresis controllers for flux and torque could determine torque and current ripple and variable switching frequency operation for the voltage source inverter. This paper is aimed to analyze DTC principles, the strategies and the problems related to its implementation and the possible improvements.

Industrial utilization of fly ash from various kinds of fuel plays an important role in the envi-ronmentally clean and cost effective power production. The primary market for fly ash utilizationis as a pozzolanic addition in concrete production. The paper concerns the concretes containingfly ash called Fly Ash from Biomass (FAB) from co-combustion of hard coal and wood biomass(wood chips). Characterization of the fly ash was carried on by means of X-ray diffractometryand E-SEM/EDS analysis. The results of laboratory studies undertaken to evaluate the influence of FAB on concrete resistance to surface scaling due to cyclic freezing and thawing in the presenceof NaCl solution were presented. The tests were carried out for concretes containing up to 25% offly ash related to cement mass. Additionally, the microstructure of air-voids was described.

It was concluded that the FAB has significant effect on concrete freeze/thaw durability. The re-placement of cement by fly ash from co-combustion progressively transformed the concrete mi-crostructure into less resistant against freeze/thaw cycles and excessive dosage (over 15%) maydangerously increase the scaling.

This research explored different types of two-phase flow patterns that influenced heat transfer rate by assessing rectangular two-phase closed thermosyphon (RTPCT) made from glass with the sides of equal length of 25.2 mm, aspect ratio 5 and 20, evaporation temperature of 50, 70, and 90 °C, working substance addition rate of 50% by volume of evaporator, and water inlet temperature at condensation of 20 °C. Upon testing with aspect ratios 5, three flow patterns emerged which were: bubble flow, slug flow and churn flow respectively. As per the aspect ratio 20, four flow patterns were discovered which were: bubble flow, slug flow, churn flow and annular flow, respectively. Aspect ratio 5 pertains characteristic which resulted in a shorter evaporation rate of the RTPCT than that of the aspect ratio 20, thus, a shorter flow distance from the evaporator section to heat releaser was observed. Therefore, flow patterns at aspect ratio 5 exhibited a faster flow velocity than that of the aspect ratio 20. Furthermore, changes of flow pattern to the one that is important for heat transfer rate can be easily achieved. Churn flow was the most important type of the flow for heat transfer, followed by slug flow. Moreover, with aspect ratio 20, annular flow was the most important flow for the heat transfer, followed by churn flow, respectively. Throughout the test, average heat flux as obtained from the aspect ratio 5 were 1.51 and 0.74 kW/m2 which were higher than those of the aspect ratio 20. The highest heat flux at the operating temperature of the evaporator section was 90 °C, which was equivalent to 2.60 and 1.52 kW/m2, respectively.