Forty years ago Antonina Kłoskowska built up a universal paradigm of three social frames of culture. They included: frame one, i.e. local production of symbolic processes, close to folk culture; frame two — understood as a network of local institutions of culture; frame three — involving a radiation of pan-local centers, in particular a reception of contents transmitted by mass media. A basic sociological criterion of differentiating between these categories includes a type of contact, and adjacency of sender and recipient of symbolic communication. Currently, following years of development of digital means of communication, computer networks and fiber optic technologies, audio-visual systems, mobile telephones, etc. a proposal of frames of culture must be examined again. New media shape new vehicles of expression (e.g. hypertext), but most importantly they inspire specific social relations. Discussion over cultural framework is also triggered by accelerated processes of economic and social transformation, advanced globalization, increase of living standards and dissemination of consumption attitudes, changes in leisure activities of the middle class. In more narrowly understood domain of institutional and professional culture one witnessed the processes of European deregulation and release of culture from state, which in Eastern Europe was accompanied by abolition of censorship and a different model of culture distribution, which is controlled by market and cultural (creative) industry rather than by central government. As a result, the nature of direct communication among people is subject to ongoing transformation. We witness more and more indirect cultural communication (off-line and on-line). Modified and broadened proposal of social frames of culture includes five rather than three paradigms, namely: the culture of indirect communication, the culture of associations and volunteers; the culture of local institutions (public and private), mass culture versus pop culture, cyber-culture, culture of network community.

One has to underline that in the new reality of our civilization we can still use analytic principles of Kłoskowska’s typology. First, we can treat spiritual culture as a phenomenon of autotelic semiosis with pragmatic definition of sign; second, while describing social functioning of culture we can use a sociological criterion of contact and adjacency.

On the 14th of February, 2015, a huge fire broke out on Łazienkowski Bridge; a five span bridge, 423 m long and 28 m wide, built in the years 1972-74. It was a fully steel structure with four plate girders and orthotropic deck. The fire started under the first span during the replacement of wooden service decks. The next day, the Department of Bridges of the Warsaw University of Technology was designated to conduct an expertise material investigation, geometrical verification, and FEM model analysis. The subject of this paper concentrates on geometrical issues. The main difficulty of this task was the lack of full reference data regarding the bridge's original structure. The old design was incomplete and there was no actual surveying results for the undamaged structure. As a conclusion, some remarks focused on surveying measurements and on the final decision regarding this bridge are given. It was eventually exchanged into a brand new one and put into public use on the 28th of October, 2015.

The first step towards condition based maintenance of the milling plant is the implementation of online condition monitoring of the mill. The following paper presents and analyses methods of monitoring the key performance factors of a vertical spindle mill that is suited for implementation on older power stations, i.e. the quantity (mass flow rate) and quality (particle fineness) of the pulverised fuel produced by the mill. It is shown herein that the mill throughput can be monitored on-line using a simple mill energy balance that successfully predicts the coal throughput within 2.33% as compared to a calibrated coal feeder. A sensitivity analysis reveals that the coal moisture is a critical measurement for this method to be adopted as an on-line mass flow monitoring tool. A laser based particle size analyser tool was tested for use in the power plant environment as an online monitoring solution to measure pulverised fuel fineness. It was revealed that several factors around the set-up and operation of the instrument have an influence on the perceived results. Although the instrument showed good precision and repeatability of results, these factors must be taken into account in order to improve the accuracy of the reported results before the instrument can be commissioned as an on-line monitoring solution.

Safety and operation efficiency of the particle accelerators strongly depend on the quality of the supplied electric current and is affected by the electric properties of all elements of the circuit. In this paper the capacitance of the superconducting bus-bars applied in the cryogenic by-pass line for the SIS100 particle accelerator at FAIR is analysed. The unit capacitance of the bus-bars is calculated numerically and found experimentally. A 2D numerical model of a cross-section of the cable is applied. The capacitance is found with three methods. The stored energy, electric displacement field and charge gathered on the surfaces of the device are calculated and analysed. The obtained values are consistent. Experimental measurements are performed using the resonance method. The measuring system is undamped using a negative conductance converter. Small discrepancies are ob- served between numerical and experimental results. The obtained values are within the requirements of the accelerator design.

One of the methods to prevent unsuitable lubrication of moving components of devices and machinery is using bi-metal and three-metal

bearings. Centrifugal casting process is one of the manufacturing methods that is used for such bearings. In this study, the purpose is

microstructure evaluation of the bonding location and length determination of diffusion bond in structural steel-bronze. A mold made of

structural steel with inner diameter of 240mm, length of 300mm and thickness of 10mm was coated by a 6mm film of bronze under

centrifugal casting process. At first, a bronze ingot with dimension of 5mm×10mm×20mm is located inside of the hollow cylindrical mold

and then the two ends of it will be sealed. During mold rotation with the rate of 800 rpm, two high power flames are used for heating the

mold under Ar gas atmosphere to melt the bronze ingot at 1000˚C. After 15minutes, the system is cooled rapidly. Results showed that the

diffusion bonding of bronze in structural steel to depth of 1.2µm from the bonding line was obtained. In this bonding, copper element was

diffused to 50% of its initial concentration.

Industrial engineers gather knowledge during their bachelor studies through lectures and

practical classes. The goal of practical class might be an extension of knowledge and/or a

consolidation and application of already gathered knowledge. It is observed that there exists

a gap between theory learnt during lectures and practical classes. If practical classes require

holistic approach and solving complex tasks (problems), students strive with understanding

relations and connections between parts of knowledge. The aim of this article is to show an

example of a simple practical assignment that can serve as a bridge between lectures and

practical classes through discussion of interactions and relations between parts of theoretical

knowledge. It is an example of in-class simulating of a line and cellular layout considering

discussion of elements impacting and impacted by the type of layout (e.g. learning curve,

changeovers, etc.). In-class verification of the presented approach confirmed its usability for

teaching industrial engineers and bridging the gap between theory delivered through lectures

and more advanced practical classes.

Power system state estimation is a process of real-time online modeling of an electric power system. The estimation is performed with the application of a static model of the system and current measurements of electrical quantities that are encumbered with an error. Usually, a model of the estimated system is also encumbered with an uncertainty, especially power line resistances that depend on the temperature of conductors. At present, a considerable development of technologies for dynamic power line rating can be observed. Typically, devices for dynamic line rating are installed directly on the conductors and measure basic electric parameters such as the current and voltage as well as non-electric ones as the surface temperature of conductors, their expansion, stress or the conductor sag angle relative to the plumb line. The objective of this paper is to present a method for power system state estimation that uses temperature measurements of overhead line conductors as supplementary measurements that enhance the model quality and thereby the estimation accuracy. Power system state estimation is presented together with a method of using the temperature measurements of power line conductors for updating the static power system model in the state estimation process. The results obtained with that method have been analyzed based on the estimation calculations performed for an example system - with and without taking into account the conductor temperature measurements. The final part of the article includes conclusions and suggestions for the further research.

The issue of line simplification is one of the fundamental problems of generalisation of geographical information, and the proper parameterisation of simplification algorithms is essential for the correctness and cartographic quality of the results. The authors of this study have attempted to apply computational intelligence methods in order to create a cartographic knowledge base that would allow for non-standard parameterisation of WEA (Weighted Effective Area) simplification algorithm. The aim of the conducted research was to obtain two independent methods of non-linear weighting of multi-dimensional regression function that determines the “importance” of specific points on the line and their comparison to each other. The first proposed approach consisted in the preparation of a set of cartographically correct examples constituting a basis for teaching a neural network, while the other one consisted in defining inference rules using fuzzy logic. The obtained results demonstrate that both methods have great potential, although the proposed solutions require detailed parameterisation taking into account the specificity of geometric variety of the source data.

Transmission of the electric power is accompanied with generation of low –frequency electromagnetic fields. Electromagnetic compatibility studies require that the fields from sources of electric power be well known. Unfortunately, many of these sources are not defined to the desired degree of accuracy. This applies e.g. to the case of the twisted-wire pair used in telephone communication; already practiced is twisting of insulated high-voltage three phase power cables and single-phase distribution cables as well. The paper presents a theoretical study of the calculation of magnetic fields in vicinity of conductors having helical structure. For the helical conductor with finite length the method is based on the Biot-Savart law. Since the lay-out of the cables is much more similar to a broken line than to strait line, in the paper the magnetic flux densities produced by helical conductor of complex geometry are also derived. The analytical formulas for calculating the 3D magnetic field can be used by a software tool to model the magnetic fields generated by e.g. twisted wires, helical coils, etc.

The development of a distributed generation will influence the structure of the power transmission and distribution network. Distributed sources have lower power and therefore the lines of lower voltage are used. Therefore, the electric field intensity near such lines is lower. On the other hand magnetic field intensity may prove essential. The main aim of the paper is to present a method estimating the “ballast” of the natural environment at 50 Hz electric and magnetic fields in the power system, with distributed and centralized generation in real operating conditions.

The paper deals with the issue of constructing delay lines on the basis of surface acoustic waves and their application to single-mode oscillators. As a result of a theoretical analysis concrete delay lines are proposed.

In the contribution, there is presented a theory of designing a symmetrical mismatched and matched delay line for a single-mode oscillator of electrical signals on the basis of which there were designed and fabricated acoustic-electronic components for sensors of non-electrical quantities.

From the experimental results it can be stated that all of six designed and fabricated delay lines can be effectively used in the construction of single-mode oscillators.

This paper presents a piecewise line generalization algorithm (PG) based on shape characteristic analysis. An adaptive threshold algorithm is used to detect all corners, from which key points are selected. The line is divided into some segments by the key points and generalized piecewise with the Li-Openshaw algorithm. To analyze the performance, line features with different complexity are used. The experimental results compared with the DP algorithm and the Li-Openshaw algorithm show that the PG has better performance in keeping the shape characteristic with higher position accuracy.

The designing process of high resolution time interval measurement systems creates many problems that need to be eliminated. The problems are: the latch error, the nonlinearity conversion, the different duty cycle coefficient of the clock signal, and the clock signal jitter. Factors listed above affect the result of measurement. The FPGA (Field Programmable Gate Array) structure also imposes some restrictions, especially when a tapped delay line is constructed. The article describes the high resolution time-to-digital converter, implemented in a FPGA structure, and the types of errors that appear there. The method of minimization and processing of data to reduce the influence of errors on the measurement is also described.

The synthesis problem for optimal control systems in the class of discrete controls is under consideration. The problem is investigated by reducing to a linear programming (LP) problem with consequent use of a dynamic version of the adaptive method of LP. Both perfect and imperfect information on behavior of control system cases are studied. Algorithms for the optimal controller, optimal estimators are described. Results are illustrated by examples.

In this article we present an industrial application of our mathematical model that integrates

planning and scheduling. Our main objective is to concretize our model and compare the

reel results with the theoretical ones. Our application is realized on a conditioning line of

pharmaceutical products at the ECAM EPMI production laboratory. For this reason and to

save time, we used Witness simulation tool. It gives an overall idea of how the line works,

the Makespan of each simulation and it highlights areas for improvement. We looked for

the best resulting sequence which corresponds to the minest Makespan and total production

cost. Then this sequence is applied on the conditioning line of pharmaceutical products for

simulation. On the other hand, we program our mathematical model with the parameters of

the conditioning line under python in version 3.6 and we adopt a simulation/optimization

coupling approach to verify our model.

For many years, a digital waveguide model is being used for sound propagation in the modeling of the vocal tract with the structured and uniform mesh of scattering junctions connected by same delay lines. There are many varieties in the formation and layouts of the mesh grid called topologies. Current novel work has been dedicated to the mesh of two-dimensional digital waveguide models of sound propagation in the vocal tract with the structured and non-uniform rectilinear grid in orientation. In this work, there are two types of delay lines: one is called a smaller-delay line and other is called a larger-delay line. The larger-delay lines are the double of the smaller delay lines. The scheme of using the combination of both smaller- and larger-delay lines generates the non-uniform rectilinear two-dimensional waveguide mesh. The advantage of this approach is the ability to get a transfer function without fractional delay. This eliminates the need to get interpolation for the approximation of fractional delay and give efficient simulation for sound wave propagation in the two-dimensional waveguide modeling of the vocal tract. The simulation has been performed by considering the vowels /ɔ/, /a/, /i/ and /u/ in this work. By keeping the same sampling frequency, the standard two-dimensional waveguide model with uniform mesh is considered as our benchmark model. The results and efficiency of the proposed model have compared with our benchmark model.