Nauki Techniczne

Archives of Metallurgy and Materials

Zawartość

Archives of Metallurgy and Materials | 2000 | No 1

Pobierz PDF Pobierz RIS Pobierz Bibtex

Bibliografia


[1] H. W. Swift, J. Mech. Phys. Solids I, I (1952).

[2] Ch. Crussard, B. Jaoul, Rev. de Metali. 47, 589 {1950).

[3] Ch. Crussard, Rev. de Metali. 50, 697 {1953).

[4] P. Ludwik, Elemente der technologischen Mechanik. J. Springer, 32 (1909).

[5] S. Krishnamurthy, K. W. Qian, R. E. Reed - Hill, Practical Applications of Quantitative Metallography, ASTM STP Philadelphia, 41 (1984).

[6] W.Truszkowski, A.Łatkowski, A. Dziadoń, Proc. 2nd Riso Intern. Symp. on Met. and Mat. Sc. 386 (1981).

[7] R. E. Reed - Hill, W. R. Cribb, S. Monteiro, Metali. Trans. 4, 2665 (1972).

[8] J. Kuśnierz, Rudy Metale 21, 15 (1976).

[9] J. Kuśnierz, Z. Jasieński, Mem. Sci. Rev. Mćtallurg. 73, 485 (1976).

[10] Y. C. Liu, Metali. Trans. A, 14A, 1199 (1983).

[11] Y. C. Liu, L. K. Johnson, Metali. Trans. A, 16A, 1531 (1985).

[12] D. Dan iel, J. J. Jonas, J. Bussiere, Textures and Microstructures 19, 175 (1992).

[13] W. Truszkowski, J. KI och, Bull. Pol. Ac.: Tech. 46, 289 {1998).

[14] J. KIoch, W Tr uszko wski, Bull. Pol. Ac.: Tech. 34, 683 (1986).

[15] W. Truszkowski, J. Kloch, Bull. Pol. Ac. Tech. 34,691 (1986).

[16] W. Truszkowski, J. Kloch, Textures and Microstructures 27-28, 531 (1996).

[17] W. Tr uszko wski, Metali. Trans. A. 7 A, 327 (1976).

[18] W. Truszko wski, J. Jarom i nek, Mem. Sci. Rev. Metallurg. 70, 433 {1973).

[19] W. Truszkowsk i, J. Gryzieck i, J. Jarominek, Bull. Ac. Pol. Sc., ser. tech. 24, 209 ( 1976).

[20] W. Truszko wski, J. Gry zie ck i, J. Jarom i nek, Metals Techn. 6, 439 (1979).

[21] W. Truszkowski, J. Gryziecki, J. Jarominek, Bull. Pol. Ac.: Tech. 31, 31 (1983).

[22] A. Krupkowski, Arch. Hutn. 2, 9 (1957).

[23] W.Truszkowski S. Wierzbiński, A. Modrzejewski, Bull. Ac. Pol. Sci., ser. tech., 30, 367 (1982).

[24] W. Truszkowski, Proc. Eight Intern. Conf. on Textures of Materials, Santa Fe, (ICOTOM-8), 1988, p. 537, ed. J. S. Kallend and G. Gottstein.

[25] R. Hill, The Mathematical Theory of Plasticity, Clarendon Press, Oxford, 1971, p. 324 (First published in 1950).

[26] W. F. Hosford, The Mechanics of Crystals and Textured Polycrystals, Oxford University Press, New York, Oxford 1993, p. 72.

[27] M. G. Stout, U. F. Kocks, Texture and Anisotropy, Preferred Orientations in Polycrystals and their Effect on Material Properties, ed. U. F. Kocks, C. N. Tome and H.-R. Wenk, Cambridge University Press, Cambridge 1988, p. 428.

[28] W. Truszkowski, A. Modrzejewski, J. Baczyński, Bull. Pol. Ac.: Tech. 37,471 (1989).

Przejdź do artykułu

Autorzy i Afiliacje

Wojciech Truszkowski
Jacenty Kloch
Pobierz PDF Pobierz RIS Pobierz Bibtex

Bibliografia


[1] D. J. DingIey, Proc. of the 8th Int. Conf. on Textures of Materials, ed. J. S. Ka 11 end and G. Gotts te i n, Santa-Fe, USA, Sept. 20-25, 1987, TMS, Warrendale, PA, 189 (1988).

[2] B. C. Wonsiewicz, G. Y. Chin, Met. Trans. I, 2715 (1970).

[3] B. C.Wonsiewicz, G. Y. Chin, Met. Trans. I, 57 (1970).

[4] Z. Jasieński, A. Piątkowski, Proc. of the 9th Int. Conf. on Strength of Metals and Alloys, Haifa 2, 1025 (1991).

[5] M. Arminjon, Acta Metali. 35, 615 (1987).

[6] M. Arminjon,, C. Donadille, Les Memoires et Eludes Scientifiques de la Revue de Metallurgie 87, N°6, 359 (1990).

[7] D. Ceccaldi, F. Yala, T. Baudin, R. Penelle, F. Royer, M. Arminjon, Int. J. of Plasticity IO, N°6, 643 ( 1994).

[8] D. Ceccaldi, F. YaIa, T. Baudin, R. Penelle, Proc. of the I O" Int. Conf. on Textures of Materials, Clausthal, Allemagne, September 20-24 (1993), Materials Science Forum, Trans Tech Publications 157-162, Part 2, 1739 (1994).

[9] J. F. W. Bishop, R. Hill, Phil. Mag. 42, 414 (1951).

[10] S. V. Harren, H. E. Deve, R. J Asaro, Acta Metali. 36, 2435 (1988).
[
11] R. Dao, R. J. Asaro, Scripta Metali. Mater. 30, 791 (1994).

[12] Z. Jasieński, T. Baudin, A. Piątkowski, R. Penelle. Scripta Materialia 35, 3,397 (1996).

Przejdź do artykułu

Autorzy i Afiliacje

Thierry Baudin
Zdzisław Jasieński
Dominique Ceccaldi
Richard Penelle
Andrzej Piątkowski
Pobierz PDF Pobierz RIS Pobierz Bibtex

Bibliografia


[1] A Hundred Years after the discovery of Invar..., The iron-nickel alloys, G. Beranger, F. Duffaut, J. Morlet, J. F. Tiers (eds), Tee& Doc-Lavoisier (1996).

[2] S. Zaefferer, R. Schwarzer, Materials Sciences Forum 157,241 (1994).

[3] S. Zaefferer, soumis au Journal of Applied Crystallography.

[4] S. Zaefferer,, T. Baudin, R. Penelle, Proc 3'd Int. Conf. On Recrystallization and Relates Phenomena, Rex'96, Monterey, Ed. T. R. McNelley, 347 (1996).

[5] Y. B. Park, D. Raabe, T. H. Yim, Scripta Materialia 35, 1277 (1996).

[6] P. L. Reydet, communication privee, Impyh.

[7] P. L. Reydet, rapport confidentiel, Imphy.

[8] S. Zaefferer, T. Baudin, R. Penelle, a paraitre.

[9] J. E. BaiIey, P. B. Hirsch, Proc. R. Soc. Lond. A267, 11 (1962).
[
10] A. Berger, P. J. Wilbrandt, F. Ernst, U. Klement, P. Haase n, Prog. Mater. Sci. 32, 1 (1988).

[11] B. L. Adams, S. I. Wright, K. Ku n ze, Metali. Trans. A 24A, 819 (1993).

Przejdź do artykułu

Autorzy i Afiliacje

F. Julliard
T. Baudin
ORCID: ORCID
R. Penelle
Pobierz PDF Pobierz RIS Pobierz Bibtex

Bibliografia


[1] J. Polmear, Materials Transactions JIM 37, 1, 12-3 I (1996).

[2] E. F. Emle , Principles of Magnesium Technology, Pergamon Press (1966).

[3] B. Lagowski, AFS Trans. 85, 23 7-240 ( 1977).

[4] P. Lyon, J. Kin g, K. Nuttall, Proc 3rd Int. Magnesium Conf. "Mg '96", April; ed. G. W. Lorimer by The Institute of Materials Manchester UK, 99-108.

[5] E. Aghion, B. Bronfin, Proc. 3rd Int. Magnesium Conf. "Mg '96"; 10---12 April; ed. G. W. Lorimer by The Institute of Materials Manchester UK, 313-326.

[6] G. W. Lorimer, G. Cliff, Proc. Analytical Electron Microscopy; ed. D.B. Williams and D. C. Joy, San Francisco Press, 153-156 (l 984).

[7] T. Massalski, Binary Alloys Diagrams, ASM International, 1990.

[8] L. L. Rokhlin, Magnesium Alloys with Rare Earth Metals, Nauka, I 980.

[9] B. Lagowski, J. Meie , Mines Branch Research Report R 63; Dept. of Mines and Technical Surveys, Ottawa, Canada 1960.

[10] M. Podosek, A. Rakowska, Proceedings of the Int. Conf. Light Alloys and Composites, 13-16 May 1999, Zakopane, Poland, 213-219.

Przejdź do artykułu

Autorzy i Afiliacje

Maria Podosek
Gordon W. Lorimer
Pobierz PDF Pobierz RIS Pobierz Bibtex

Bibliografia


[1] J. R. Daviesed., Stainless Steels, ASM Specialty Handbook; (1994).

[2] C. H. Shek, G. J. Shen, J. K. L. Lai, B. J. Duggan, Materials Science Forum, 157-162, 853 (1994).

[3] N. Akdut, J. Foct, Scripta Metali. et Mater. 32, 103, 109 (1995).

[4] A. Maciosowski, S. Gorczyca, J. Pospiech, J. Jura, Archives of Metali. 23, 217 (1978).

[5] W. B. Hutchison, K. Ushioda, G. Runsjo, Mater. Science and Techn. I, 728 (1985).

[6] J. Komend a R. Sa ndst ro m, Materials Characterization 31, 155 (1993).

[7] J. J. Jonas, M. P. Butron - Guollen, C. S. Da Costa Viana, Proc. I I-th Int. Conf. on Textures of Materials, China, 575 (1996).

[8] M. P. Butron - Guillen, C. S. Da Costa Viana, J. J. Jon as, Proc. I I-th Int. Conf. on Textures of Materials, China, 604-61 O ( 1996).

[9] R. K. Ray, J. J. Jonas, Int. Materials Reviews 35, I, I (1990).

[10] J. Pospiech, G. Bruckner, Proc. 11-th Int. Conf. on Textures of Materials, China 598 (1996).

[11] W. Ratusze k, J. Ryś, K. Chruście I, Archives of Metallurgy 44, 305 (1999).

[12] J. Ryś, W. Ratuszek, J. Woźniak, K. Chruściel, Inżynieria materiałowa 20, 601 (1999).

[13] C. Donadille, R. Valle, P. Dervin, R. Penelle, Acta Metali. 37, 1547 (1989).

[14] H. Inagaki, ISIJ International 34,313 (1994).

[15] K. Lucke, M. Holscher, Textures and Microstructures 14-18, 585 (1991).

[16] H. J. Bunge, Mathematische Methoden der Texturanalyse, Akademie-Verlag, Berlin (1969).

Przejdź do artykułu

Autorzy i Afiliacje

Wiktoria Ratuszek
Janusz Ryś
Małgorzata Karnat
Pobierz PDF Pobierz RIS Pobierz Bibtex

Bibliografia


[1] Cz. Malinowski, S. Małecki, B. Malchar, J. Orlicz, 2nd International Conference "Non-ferrous metals 95", Kraków, September 7-9 (1995).

[2] Cz. Malinowski, S. Małecki, International Conference on the Recycling and Treatment of Metal Secondary Raw Materials, Podbanske-Vysoke Tatry, 8-10 maja 1996.

[3] W. Ptak, M. Sukiennik, ZN AGH Metalugia i Odlewnictwo 349, 50, 17 (1973).

[4] W. Ptak, M. Sukiennik, Archiwum Hutnictwa 16, I (1971).

[5] I. Bar i n, O. Knacke, Thermochemical Properties of Inorganic Substances, Verlag Stahleisen m.b.H., Dusseldorf, 1973.

[6] Cz. Malinowski, S. Małecki J. Orlicz, XII Konferencja Sprawozdawcza PAN "Metalurgia '98", 23-26.09.1998, Krynica.

[7] Cz. Malinowski, Archiwum Hutnictwa 28, 2, 193 (1983).

[8] T. Havlik, M. Skrobian, Cz. Malinowski, S. Małecki, Hutnicke Listy 4, 217 ( 1989).

Przejdź do artykułu

Autorzy i Afiliacje

Jerzy Sędzimir
Pobierz PDF Pobierz RIS Pobierz Bibtex

Bibliografia


[1] Cz. Malinowski, S. Małecki, B. Malchar, J. Orlicz, 2nd International Conference "Non-ferrous metals 95", Kraków, September 7-9 (1995).

[2] Cz. Malinowski, S. Małecki,i, International Conference on the Recycling and Treatment of Metal Secondary Raw Materials, Podbanske-Vysoke Tatry, 8-10 maja 1996.

[3] W. Ptak, M. Sukiennik, ZN AGH Metalugia i Odlewnictwo 349, 50, 17 (1973).

[4] W. Ptak, M. Sukiennik, Archiwum Hutnictwa 16, I (1971).

[5] I. Barin, O. Knacke, Thermochemical Properties of Inorganic Substances, Verlag Stahleisen m.b.H., Dusseldorf, 1973.

[6] Cz. Malinowski, S. Małecki,, J. Orlicz, XII Konferencja Sprawozdawcza PAN "Metalurgia '98", 23-26.09.1998, Krynica.

[7] Cz. Malinowski, Archiwum Hutnictwa 28, 2, 193 (1983).

[8] T. Havlik, M. Skrobian, Cz. Malinowski,, S. Małecki, Hutnicke Listy 4, 217 ( 1989).

Przejdź do artykułu

Autorzy i Afiliacje

Czesław Malinowski
Stanisław Małecki
Pobierz PDF Pobierz RIS Pobierz Bibtex

Bibliografia


[1] K. Tashiro, G. R. Purdy, Observation of Chemically Induced Grain Boundary Migration in Several NEW Systems, Scripta Metali. 21, 361 1987.

[2] A. Pawłowski, P. Zięba, Phase Transformations Controlled by DifTusion at Moving Boundaries, Arch. Metali. PAN, Kraków, 1991

[3] A. Pawłowski,, P. Zięb a, Grain Boundary Phenomena in Partially Stabilised Zirconia Polycrystals, Arch. Metali. 44 [l] 3-12 1999.

[4] A. Pawłowski, Z. Pędzich, M. M. Bućko, Migration of Intergranular Boundaries in Partially Stabilized Zr02+ 5-6 mol. % Y203 Ceramics, in British Ceramics Proceedings No 60, vol. 1, The Sixth Conference and Exhibition of the European Ceramics Society, IOM Communications Ltd, University Press, Cambridge, Wielka Brytania, 1999, 129-130.

[5] A. Pawłowski,, M. M. Bućko, Z. Pęd z ich, Microstructure and Properties of Ion Conductors in the Zr02-Y203-MgO System as an Effect of DIGM Process, Arch. Metali. 44 [4] 375 (J 999).

[6] Ju n - Wan Jeon g, Yoon N. Duk, Migration of Intergranular Boundaries in Cubic Zirconia - Yttria Induced by Magnesia Addition, J. Amer. Ceram. Soc., 73 [7] 2063-2067 1990.

[7] Z. Pędzich, K. Haber ko, Coprecipitation Conditions and Compaction Behaviour of Y-TZP Nanometric Powders, Ceramics International 20 [2] 85-89 1994.

[8] M. M. Bućko, W. Pyda Influence of the Microstructure on the Mechanical and Electrical Properties of Y-CSZ, 9th CIMTEC Proceedings, Advances in Science and Technology 15, P. Vincenzini (Ed.), Techna srl., Faenza, 1999.

Przejdź do artykułu

Autorzy i Afiliacje

Andrzej Pawłowski
Zbigniew Pędzich
Mirosław M. Bućko
Pobierz PDF Pobierz RIS Pobierz Bibtex

Bibliografia


[1] W. Ptak, M. Sukiennik, ZN AGH Metalurgia i Odlewnictwo 349, 50 17-30 (1973).

[2] W. Ptak, M. Sukiennik, Archiwum Hutnictwa 16, 1 (1971).

[3] Cz. Malinowski, S. Małecki, B. Malchar, J. Orlicz, 211 International Conference ,,Non-ferrous metals 95", Kraków, September 7-9 (1995).

[4] Cz. Malinowski, S. Małecki,, International Conference on the Recycling and Treatment of Metal Secondary Raw Materials, Podbanske-Vysoke Tatry, 8-IO maja 1996.

[5] Cz. Cz. Malinowski, S. Małecki,, J. Orlicz, XII Konferencja Sprawozdawcza PAN ,,Metalurgia '98", 23-26.09.1998, Krynica.

[6] W. Ptak, M. Sukiennik i inni, Archiwum Hutnictwa 31, 4 537-548 (1986).

[7] M. Sukiennik, T. Karwan, Cz.Malinowski, 1-st International Symposium lnterprogress - Metallurgy, Kosice-Bratislava, 20-29 June 1990.

Przejdź do artykułu

Autorzy i Afiliacje

Czesław Malinowski
Stanisław Małecki

Instrukcja dla autorów

Instructions for Authors


Archives of Metallurgy and Materials is a quarterly journal of Polish Academy of Sciences and Institute of Metallurgy and Materials Science PAS which publishes original scientific papers and reviews in the fields of metallurgy and materials science, foundry, mechanical working of metals, thermal engineering in metallurgy, thermodynamic and physical properties of materials, phase equilibria in the broad context and diffusion. In addition to the regular, original scientific papers and conference proceedings, invited reviews presenting the up-to-date knowledge and monothematic issues devoted to preferred areas of research will be published. Submission of a paper implies that it has not been published previously, that it is not under consideration for publication elsewhere, and that if accepted it will not be published elsewhere in the same form.


When preparing the manuscript, please pay attention to the following rules:


1. Manuscript submission

1.1. Manuscripts to be considered for publication should be submitted to the Editorial Office via www.editorialsystem.com/amm/. Authors should designate corresponding author, whose responsibility is to represent the Authors in contacts with the Editorial Office. The corresponding author receives an e-mail notification confirming the submission of the manuscript to the Editorial Office and is informed about the progress of the review process.


1.2. Manuscript should not exceed 15 pages of full-size paper (A4), must be double spaced (please use 12 point font), with generous margins, and the pages must be numbered. Authors should submit an electronic file of their manuscript in Microsoft Word (minimum : version 2000).


1.3. All manuscripts must be written in good English. Both British and U.S. English are acceptable but Authors should be consistent in their usage. It is sole responsibility of the Authors to make sure that the manuscript is grammatically correct and spell checked. Authors are strongly encouraged to have the manuscript proofread by a native speaker of English or a language professional, before it is submitted to the editorial office. Papers written in poor English will be automatically rejected without being subjected to review.


1.4. Authors should submit an electronic copy of final version of their paper in Microsoft Word Format, shemes (sketches) and figures saved as .eps, .jpeg, or .tiff.


1.5. Articles submitted for publication should include abstract and maximum 5 keywords.


1.6. Please adhere to the following order of presentation:


Author(s) with first names in full and ORCID.

Affiliation(s): in a short form (Institution, City, Country). Use the superscripts (*, **, . . .) after the Authors’ names in case of different affiliations.

Title: All words in lower case (first letter of first word capitalized).


Abstract: maximum 10 lines, including primary objective, research design, methods and procedures, main outcomes and results. Do not use abbreviations in the abstract.

Keywords: 5 maximum.

Main text: Begin on the second page with Introduction, followed by Experimental (Materials and Methods) and/or Theory section, Results, Discussion, and end with Conclusion section and Acknowledgement. When appropriate the Authors may choose to combine Results section and Discussion section into one Results and Discussion section. Make sure the text in sections is divided logically into paragraphs.
Use the decimal system for sections, subsections and (at the most) sub-subsections, as exemplified in the headings of these instructions.
All abbreviations should be spelled out the first time they are introduced in text or references. Thereafter the abbreviation can be used.


Appendices

References

Correspondence address: title, name, postal address, telephone and e-mail address of the corresponding Author, number ORCID.

Figure captions

Tables

2. Manuscript preparation


The editorial system includes:


1. Manuscript, which should contain the full text with figures, tables and signatures to them where they are placed.


2. Figures, tables and signatures to them as separate files.


2.1. Formulae, equations and units
The formulas should be written in Microsoft Equation and MathType with the possibility of editing (not as graphics).
Formulae and equations should be typed on separate lines and numbered consecutively in parentheses on the right side (1) . . . (n). Vectors must be indicated as such. Size of symbols should be kept uniform for all equations in the manuscript. Formulae and equations should be referred to in the text as follows: Eq. (1).
Numbers and units must be separated by a space, e.g. 5.5 wt.%, 273.15 K, 1013 MPa, etc. The only exception are angle degrees, e.g. 90°.

2.2. Figures

Figures should be complete without corrections and additions in the word. Figures are usually printed in reduced size (fitting column width of 85 mm) and this should be taken into account when preparing them. For the best results, make sure that lettering on figures and micrographs is at least 2 mm high after reduction, and the style of labeling must be uniform for all figures. Each figure should have its own caption explaining the content without reference to the text. Figure captions should be typed on a separate page at the end of manuscript. The appropriate place of in the text should be indicated by <Fig. 3 > written in separate line. Figures should be referred to in text as follows: Fig. 1. The magnification must be indicated by a labeled scale marker on the micrograph itself, not drawn below it. For optimum printing quality micrographs should be saved as .eps or .tiff at a resolution of at least 300 dpi while line drawings at a resolution of at least 600 dpi.

2.3. Move file
The authors can make movie files up to 100 MB in MP4 format.
The author at the first reference (Movie 1. Click here) should with the Click here command connect the web address with the place of uploading the movie (hyperlink) and at the end of the article provide a list of hyperlinks (samples: Movie 1, hyperlink, movie no 2, hyperlink ......).

The files will be removed from the edytorial system when rejected or published article (moved to Rejected or Published manuscripts).


2.4. Tables

Tables together with captions should be typed on separate page at the end of manuscript. Tables are to be numbered consecutively using Arabic numbers in the text (TABLE 1 . . . n). A caption must be placed above respective table and should explain the symbols used in the heading and in the left hand column. Tables should be referred to in the text as follows: TABLE 1.


2.5. References

References should be typed on separate pages and numbered consecutively applying the system accepted by the Quarterly (initials and names all authors, journal title [abbreviated according to the Journal Title Abbreviations of Web of Science: http://library.caltech.edu/reference/abbreviations/, everyone abbreviation should be end with a dot - example. Arch.Metall.Mater.] or book title; journal volume or book publisher; page spread; publication year in bracket).

The use of DOI numbers (full notation and linked) is mandatory for each paper and should be formatted as shown in the examples below:

Journals:

[1] L.B. Magalas, Development of High-Resolution Mechanical Spectroscopy, HRMS: Status and Perspectives. HRMS Coupled with a Laser Dilatometer. Arch. Metall. Mater. 60 (3), 2069-2076 (2015). DOI: https://doi.org/10.1515/AMM-2015-0350

[2] E. Pagounis, M.J. Szczerba, R. Chulist, M. Laufenberg, Large Magnetic Field-Induced Work output in a NiMgGa Seven-Lavered Modulated Martensite. Appl. Phys. Lett. 107, 152407 (2015). DOI: https://doi.org/10.1063/1.4933303

[3] H. Etschmaier, H. Torwesten, H. Eder, P. Hadley, Suppression of Interdiffusion in Copper/Tin thin Films. J. Mater. Eng. Perform. (2012).DOI: https://doi.org/10.1007/s11665-011-0090-2 (in press).

Books:

[2] M. H. Kamdar, A.M.C. Westwood, Environment-Sensitive Mechanical Behaviour, New York 1981.

Proceedings:

[3] F. Erdogan, in: H. Liebowitz (Ed.), Fracture 2, Academic Press 684, New York (1968).

Internet resource:

[4] http://www.twi.co.uk/content/fswqual.html

PhD Thesis:

[6] F.M. LIang. World Hyphenation by Computer. PhD thesis, Stanford University, Stanford, CA 94305, June.

Chapter in books:

[7] R. Major, P. Lacki, R. Kustosz, J. M. Lackner, Modelling of nanoindentation to simulate thin layer behavior, in: K. J. Kurzydłowski, B. Major,

P. Zięba (Ed.), Foundation of Materials Design 2006, Research Signpost (2006).

Articles in press:

[8] H. EtschmaIer, H. Torwesten, H. Eder, P. Hadley, J. Mater. Eng. Perform. (2012), DOI: 10.1007/s11665-011-0090-2 (in press).

3. Fees

No honorarium will be paid. The journal does not have article processing charges (APCs) nor article submission charges.

4. Review and proofread process

4.1. Peer review process All submitted manuscripts undergo review by renowned specialists appointed by the Editor-in-Chief and members of the Editorial Board. Reviewers receive guidance to help them perform the review, and submit written opinion on the manuscript together with recommendation to accept as is, or reject, or accept after revision. In the latter case i.e. when revision is requested, the authors are obliged to respond to Editor and Reviewers’ comments in detail and make revisions to the manuscript. A rebuttal to Reviewers’ comments can also be sent via the Editorial System in writing. Decision to reject the article is taken by the Editorial Board with the final decision belonging to the Editor, who may appoint another reviewer if necessary. Reviewers remain anonymous to Authors and their identity cannot be revealed by the Editorial Office.

In a separate file, the authors are requested to suggest names and contact details (affiliations and valid e-mail addresses) of at least three experts who could serve as reviewers.

Brief explanation (2-3 sentence-long) why each person is suitable as a reviewer should also be provided. The suggested reviewers cannot be from the same country as affiliation of the corresponding author. The decision to appoint a reviewer belongs solely to the editor.

4.2. Revised manuscript submission

When revision of a manuscript is requested, Authors should return the revised version of their manuscript as soon as possible. Prompt action may ensure fast publication if a paper is finally accepted for publication in Arch. Metall. Mater. If it is the first revision of an article Authors are requested to return their revised manuscript within 7 days.

If it is the second revision Authors are requested to return their revised manuscript within 1 day.

4.3. Final proofreading

Authors will receive a pdf file with the edited version of their manuscript for final proofreading. This is the last opportunity to view an article before its publication on the journal web site. No changes or modifications can be introduced once it is published. Thus authors are requested to check their proof pages carefully against manuscript within 3 working days and prepare a separate document containing all changes that should be introduced. Authors are sometimes asked to provide additional comments and explanations in response to remarks and queries from the language or technical editors.

5. Original version

Starting from issue 1/ 2018, Volume 63, Archives of Metallurgy and Materials is published in electronic via www.journals.pan.pl. The printed version is printed only for designated libraries (legal basis: Regulation of the Minister of Culture and Art of March 6, 1997).

6. Prevent cases of plagiarism

Readers should be sure that the authors present the results of their work transparently, fair and honest, regardless of whether they are the direct authors, or used the help of a specialized entity (natural or legal person). To prevent cases of plagiarism, "ghostwriting" and "guest Authorship", the Editorial Office will require that the Authors disclosed the contribution of individual Authors in the creation of manuscript (with their affiliations and contributions, i.e. the information who is responsible for: research concept and design, collection and/or assembly of data, data analysis and interpretation, writing the manuscript). Funding sources (together with grant number) must also be revealed. The corresponding Author will bear the main responsibility for the manuscript. Detected cases will be exposed, including notifying the appropriate entities (institutions employing the Authors, scientific societies, associations of editors of scientific journals, etc.).

7. License type

Articles are printed in an open access and distributed under the terms of the Creative Commons Attribution-NonCommercial (CC BY-NC 4.0, https://creativecommons.org/licenses/by-nc/4.0/). This license allows authors to copy and redistribute the material in any medium or format, remix, transform, and build upon the material. Authors may not use the material for commercial purposes. However, this condition does not include dependent works (they may be covered by another license).

Submission of an article to the journal is unequivocal to expressing consent to the publication in both paper and electronic form.

Dodatkowe informacje

Archives of Metallurgy and Materials is covered by the following services:


Arianta, Baidu Scholar, BazTech, Celdes, Chemical Abstracts Service (CAS) - CAplus, Clarivate Analytics (formerly Thomson Reuters) - Current Contents/Engineering, Computing, and Technology, Clarivate Analytics (formerly Thomson Reuters) - Journal Citation Reports/Science Edition, Clarivate Analytics (formerly Thomson Reuters) - Materials Science Citation Index, Clarivate Analytics (formerly Thomson Reuters) - Science Citation Index Expanded, CNKI Scholar (China National Knowledge Infrastructure), CNPIEC, DOAJ (Directory of Open Access Journals), EBSCO (relevant databases), EBSCO Discovery Service, Elsevier - SCOPUS, Genamics JournalSeek, Google Scholar, Index Copernicus, J-Gate, JournalTOCs, KESLI-NDSL (Korean National Discovery for Science Leaders), Microsoft Academic, Naviga (Softweco), Primo Central (ExLibris), ProQuest (relevant databases), ReadCube, ResearchGate, SCImago (SJR), Sherpa/RoMEO, Summon (Serials Solutions/ProQuest), TDNet, TEMA Technik und Management, Ulrich's Periodicals Directory/ulrichsweb, WanFang Data, WorldCat (OCLC)

Ta strona wykorzystuje pliki 'cookies'. Więcej informacji