Nauki Techniczne

Archive of Mechanical Engineering

Zawartość

Archive of Mechanical Engineering | 2017 | vol. 64 | No 2

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

To achieve better precision of features generated using the micro-electrical discharge machining (micro-EDM), there is a necessity to minimize the wear of the tool electrode, because a change in the dimensions of the electrode is reflected directly or indirectly on the feature. This paper presents a novel modeling and analysis approach of the tool wear in micro-EDM using a systematic statistical method exemplifying the influences of capacitance, feed rate and voltage on the tool wear ratio. The association between tool wear ratio and the input factors is comprehended by using main effect plots, interaction effects and regression analysis. A maximum variation of four-fold in the tool wear ratio have been observed which indicated that the tool wear ratio varies significantly over the trials. As the capacitance increases from 1 to 10 nF, the increase in tool wear ratio is by 33%. An increase in voltage as well as capacitance would lead to an increase in the number of charged particles, the number of collisions among them, which further enhances the transfer of the proportion of heat energy to the tool surface. Furthermore, to model the tool wear phenomenon, a egression relationship between tool wear ratio and the process inputs has been developed.

Przejdź do artykułu

Bibliografia

[1] L. Tang and Y.F. Guo. Electrical discharge precision machining parameters optimization investigation on S-03 special stainless steel. The International Journal of Advanced Manufacturing Technology, 70(5-8):1369–1376, 2014. doi: 10.1007/s00170-013-5380-4.
[2] V.K. Meena and M.S. Azad. Grey relational analysis of micro-EDM machining of Ti-6Al-4V alloy. Materials and Manufacturing Processes, 27(9):973–977, 2012. doi: 10.1080/10426914.2011.610080.
[3] S.P. Sivapirakasam, J. Mathew, and M. Surianarayanan. Multi-attribute decision making for green electrical discharge machining. Expert Systems with Applications, 38(7):8370–8374, 2011. doi: 10.1016/j.eswa.2011.01.026.
[4] T. Muthuramalingam and B. Mohan. Influence of discharge current pulse on machinability in electrical discharge machining. Materials and Manufacturing Processes, 28(4):375–380, 2013. doi: 10.1080/10426914.2012.746700.
[5] Y.H. Guu, C.Y. Chou, and S.-T. Chiou. Study of the effect of machining parameters on the machining characteristics in electrical discharge machining of Fe-Mn-Al alloy. Materials and Manufacturing Processes, 20(6):905–916, 2005. doi: 10.1081/AMP-200060412.
[6] B. Jabbaripour, M.H. Sadeghi, Sh. Faridvand, and M.R. Shabgard. Investigating the effects of EDM parameters on surface integrity, MRR and TWR in machining of Ti–6Al–4V. Machining Science and Technology, 16(3):419–444, 2012.
[7] R. Mukherjee and S. Chakraborty. Selection of EDM process parameters using biogeography based optimization algorithm. Materials and Manufacturing Processes, 27(9):954–962, 2012. doi: 10.1080/10426914.2011.610089.
[8] S.S. Agrawal and V. Yadava. Modeling and prediction of material removal rate and surface roughness in surface-electrical discharge diamond grinding process of metal matrix composites. Materials and Manufacturing Processes, 28(4):381–389, 2013. doi: 10.1080/10426914.2013.763678.
[9] M.Ch. Panda and V. Yadava. Intelligent modeling and multiobjective optimization of die sinking electrochemical spark machining process. Materials and Manufacturing Processes, 27(1):10–25, 2012. doi: 10.1080/10426914.2010.544812.
[10] V.V. Reddy, A. Kumar, P.M. Valli, and C.S. Reddy. Influence of surfactant and graphite powder concentration on electrical discharge machining of PH17-4 stainless steel. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 37(2):641–655, 2015. doi: 10.1007/s40430-014-0193-4.
[11] B. Jabbaripour, M.H. Sadeghi, M.R. Shabgard, and H. Faraji. Investigating surface roughness, material removal rate and corrosion resistance in PMEDM of -TiAl intermetallic. Journal of Manufacturing Processes, 15(1):56–68, 2013. doi: 10.1016/j.jmapro.2012.09.016.
[12] A. Bhattacharya, A. Batish, and N. Kumar. Surface characterization and material migration during surface modification of die steels with silicon, graphite and tungsten powder in EDM process. Journal of Mechanical Science and Technology, 27(1):133–140, 2013. doi: 10.1007/s12206-012-0883-8.
[13] M.P. Jahan,Y.S.Wong, and M. Rahman. Acomparative experimental investigation of deep-hole micro-EDM drilling capability for cemented carbide (WC-Co) against austenitic stainless steel (SUS 304). The International Journal of Advanced Manufacturing Technology, 46(9-12):1145–1160, 2010. doi: 10.1007/s00170-009-2167-8.
[14] H.S. Lim, Y.S. Wong, M. Rahman, and M.K.E. Lee. A study on the machining of high aspect ratio micro-structures using micro-EDM. Journal of Materials Processing Technology, 140(1):318–325, 2003. doi: 10.1016/S0924-0136(03)00760-X.
[15] M.P. Jahan, Y.S. Wong, and M. Rahman. A comparative study of transistor and RC pulse generators for micro-EDM of tungsten carbide. International Journal of Precision Engineering and Manufacturing, 9(4):3–10, 2008.
[16] H.S. Liu, B.H. Yan, F.Y. Huang, and K.H. Qiu. A study on the characterization of high nickel alloy micro-holes using micro-EDM and their applications. Journal of Materials Processing Technology, 169(3):418–426, 2005. doi: 10.1016/j.jmatprotec.2005.04.084.
[17] F. Han, S. Wachi, and M. Kunieda. Improvement of machining characteristics of micro-EDM using transistor type isopulse generator and servo feed control. Precision Engineering, 28(4):378–385, 2004. doi: 10.1016/j.precisioneng.2003.11.005.
[18] F.L. Amorim and W.L. Weingaertner. The influence of generator actuation mode and process parameters on the performance of finish EDM of a tool steel. Journal of Materials Processing Technology, 166(3):411–416, 2005. doi: 10.1016/j.jmatprotec.2004.08.026.
[19] Y.S. Wong, M. Rahman, H.S. Lim, H. Han, and N. Ravi. Investigation of micro-EDM material removal characteristics using single RC-pulse discharges. Journal of Materials Processing Technology, 140(1):303–307, 2003. doi: 10.1016/S0924-0136(03)00771-4.
[20] N. Natarajan and P. Suresh. Experimental investigations on the microhole machining of 304 stainless steel by micro-EDM process using RC-type pulse generator. T he International Journal of Advanced Manufacturing Technology, 77(9-12):1741–1750, 2015. doi: 10.1007/s00170-014-6494-z.
[21] D.J. Kim, S.M. Yi, Y.S. Lee, and C.N. Chu. Straight hole micro EDM with a cylindrical tool using a variable capacitance method accompanied by ultrasonic vibration. Journal of Micromechanics and Microengineering, 16(5):1092, 2006. http://stacks.iop.org/0960-1317/16/i=5/a=031.
[22] Y. Li, M. Guo, Z. Zhou, and M. Hu. Micro electro discharge machine with an inchworm type of micro feed mechanism. Precision Engineering, 26(1):7–14, 2002. doi: 10.1016/S0141-6359(01)00088-5.
[23] J. Ramkumar, N. Glumac, S.G. Kapoor, and R.E. DeVor. Characterization of plasma in micro-EDM discharge using optical spectroscopy. Journal of Manufacturing Processes, 11(2):82–87, 2009. doi: 10.1016/j.jmapro.2009.10.002.
[24] K.P. Maity and R.K. Singh. An optimisation of micro-EDM operation for fabrication of microhole. The International Journal of Advanced Manufacturing Technology, pages 1–9, 2012. doi: 10.1007/s00170-012-4098-z.
[25] M.S. Azad and A.B. Puri. Simultaneous optimisation of multiple performance characteristics in micro-EDM drilling of titanium alloy. The International Journal of Advanced Manufacturing Technology, 61(9-12):1231–1239, 2012. doi: 10.1007/s00170-012-4099-y.
[26] B.B. Pradhan, M. Masanta, B.R. Sarkar, and B. Bhattacharyya. Investigation of electro-discharge micro-machining of titanium super alloy. The International Journal of Advanced Manufacturing Technology, 41(11-12):1094, 2009. doi: 10.1007/s00170-008-1561-y.
[27] H.S. Liu, B.H. Yan, F.Y. Huang, and K.H. Qiu. A study on the characterization of high nickel alloy micro-holes using micro-EDM and their applications. J ournal of Materials Processing Technology, 169(3):418–426, 2005. doi: 10.1016/j.jmatprotec.2005.04.084.
[28] F.L. Amorim and W.L. Weingaertner. The influence of generator actuation mode and process parameters on the performance of finish EDM of a tool steel. Journal of Materials Processing Technology, 166(3):411–416, 2005. doi: 10.1016/j.jmatprotec.2004.08.026.
[29] U. Natarajan, X.H. Suganthi, and P.R. Periyanan. Modeling and multiresponse optimization of quality characteristics for the micro-EDM drilling process. Transactions of the Indian Institute of Metals, 69(9):1675–1686, 2016. doi: 10.1007/s12666-016-0828-5.
[30] M.A.Ahsan Habib and M. Rahman. Performance analysis ofEDMelectrode fabricated by localized electrochemical deposition for micro-machining of stainless steel. The International Journal of Advanced Manufacturing Technology, 49(9-12):975–986, 2010. doi: 10.1007/s00170-009-2479-8.
[31] F.T. Weng, R.F. Shyu, and C.S. Hsu. Fabrication of micro-electrodes by multi-EDM grinding process. Journal of Materials Processing Technology, 140(1):332–334, 2003. doi: 10.1016/S0924-0136(03)00748-9.
[32] K. Takahata, N. Shibaike, and H. Guckel. High-aspect-ratio WC-Co microstructure produced by the combination of LIGA and micro-EDM. Microsystem Technologies, 6(5):175–178, 2000. doi: 10.1007/s005420000052.
[33] T.Y. Tai, T. Masusawa, and H.T. Lee. Drilling microholes in hot tool steel by using microelectro discharge machining. Materials Transactions, 48(2):205–210, 2007. doi: 10.2320/matertrans.48.205.
[34] D.D. DiBitonto, P.T. Eubank, M.R. Patel, and M.A. Barrufet. Theoretical models of the electrical discharge machining process. I. A simple cathode erosion model. Journal of Applied Physics, 66(9):4095–4103, 1989. doi: 10.1063/1.343994.
[35] P. Govindan and S.S. Joshi. Experimental characterization of material removal in dry electrical discharge drilling. International Journal of Machine Tools and Manufacture, 50(5):431–443, 2010. doi: 10.1016/j.ijmachtools.2010.02.004.
[36] S. Joshi, P. Govindan, A. Malshe, and K. Rajurkar. Experimental characterization of dry EDM performed in a pulsating magnetic field. CIRP Annals-Manufacturing Technology, 60(1):239–242, 2011. doi: 10.1016/j.cirp.2011.03.114.
[37] P. Govindan, A. Gupta, S.S. Joshi, A. Malshe, and K.P. Rajurkar. Single-spark analysis of removal phenomenon in magnetic field assisted dry EDM. J ournal of Materials Processing Technology, 213(7):1048–1058, 2013. doi: 10.1016/j.jmatprotec.2013.01.016.
[38] D.C. Montgomery. Design and Analysis of Experiments. JohnWiley & Sons, New York, 2008.
Przejdź do artykułu

Autorzy i Afiliacje

Govindan Puthumana
1

  1. Technical University of Denmark, Lyngby, Denmark
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The work presents investigation on the water droplet impingement at a substrate with three different surface coating. The experiments are carried out for two temperatures of the surface: 23ºC (room temperature) and -10ºC. The water droplet contact is recorded via ultra-fast camera and simultaneously via fast thermographic camera. The wetting properties are changing for subzero temperatures of substrates.

Przejdź do artykułu

Bibliografia

[1] A. Alizadeh,V. Bahadur, S. Zhong,W. Shang, R. Li, J. Ruud, M.Yamada, L. Ge, A. Dhinojwala, and M. Sohal. Temperature dependent droplet impact dynamics on flat and textured surfaces. Applied Physics Letters, 100(11):111601, 2012. doi: 10.1063/1.3692598.
[2] M. Nosonovsky and V. Hejazi. Why superhydrophobic surfaces are not always icephobic. ACS Nano, 6(10):8488–8491, 2012. doi: 10.1021/nn302138r.
[3] K.K. Varanasi, T. Deng, M. Hsu, and N. Bhate. Hierarchical superhydrophobic surfaces resist water droplet impact. In Technical Proceedings of the 2009 NSTI Nanotechnology Conference and Expo, Houston, Texas, USA, 3-7 May 2009. Nano Science and Technology Institute. http://hdl.handle.net/1721.1/64767.
[4] L. Mishchenko, B. Hatton, V. Bahadur, J.A. Taylor, T. Krupenkin, and J. Aizenberg. Design of ice-free nanostructured surfaces based on repulsion of impacting water droplets. ACS Nano, 4(12):7699–7707, 2010. doi: 10.1021/nn102557p.
[5] R. Ramachandran, K. Sobolev, and M. Nosonovsky. Dynamics of droplet impact on hydrophobic/icephobic concrete with the potential for superhydrophobicity. Langmuir, 31(4):1437–1444, 2015. doi: 10.1021/la504626f.
[6] T. Bobinski, G. Sobieraj, K. Gumowski, J. Rokicki, M. Psarski, J. Marczak, and G. Celichowski. Droplet impact in icing conditions – the influence of ambient air humidity. Archives of Mechanics, 66(2):127–142, 2014. http://am.ippt.pan.pl/index.php/am/article/view/v66p127.
[7] R. Rioboo, M. Marengo, and C. Tropea. Time evolution of liquid drop impact onto solid, dry surfaces. Experiments in Fluids, 33(1):112–124, 2002. doi: 10.1007/s00348-002-0431-x.
[8] N. Laan, K.G. de Bruin, D. Bartolo, C. Josserand, and D. Bonn. Maximum diameter of impacting liquid droplets. Physical Review Applied, 2(4):044018, 2014. doi: 10.1103/PhysRevApplied.2.044018.
[9] B.B.J. Stapelbroek, H.P. Jansen, E.S. Kooij, J.H. Snoeijer, and A. Eddi. Universal spreading of water drops on complex surfaces. Soft Matter, 10(15):2641–2648, 2014. doi: 10.1039/c3sm52464g.
[10] M. Remer, M. Psarski, K. Gumowski, J. Rokicki, G. Sobieraj, M. Kaliush, D. Pawlak, and G. Celichowski. Dynamic water contact angle during initial phases of droplet impingement. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 508:57–69, 2016. doi: 10.1016/j.colsurfa.2016.08.028.
[11] C.T. Crowe. Multiphase Flow Handbook, volume 59 of Mechanical and Aerospace Engineering Series. CRC Press, 2005.
[12] C. Stanley, R. Jackson, N. Karwa, and G. Rosengarten. The effects of surface wettability on droplet fingering. In The Proceedings of the 19th Australasian Fluid Mechanics Conference, Melbourne, Australia, 8-11 December 2014. Paper No. 49.
[13] A. Latka, A. Strandburg-Peshkin, M.M. Driscoll, C.S. Stevens, and S.R. Nagel. Creation of prompt and thin-sheet splashing by varying surface roughness or increasing air pressure. Physical Review Letters, 109(5):054501, 2012. doi: 10.1103/PhysRevLett.109.054501.
[14] T.G. Myers, J.P.F. Charpin, and C.P. Thompson. Slowly accreting ice due to supercooled water impacting on a cold surface. Physics of Fluids, 14(1):240–256, 2002. doi: 10.1063/1.1416186.
Przejdź do artykułu

Autorzy i Afiliacje

Tomasz Lizer
1
Michał Remer
1
Grzegorz Sobieraj
1
Maciej Psarski
2
Daniel Pawlak
2
Grzegorz Celichowski
2

  1. Institute of Aeronautics and Applied Mechanics, Warsaw University of Technology, Poland.
  2. Faculty of Chemistry, Department of Materials Technology and Chemistry, University of Lodz, Poland.
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Experimental and numerical study of the steady-state cyclonic vortex from isolated heat source in a rotating fluid layer is described. The structure of laboratory cyclonic vortex is similar to the typical structure of tropical cyclones from observational data and numerical modelling including secondary flows in the boundary layer. Differential characteristics of the flow were studied by numerical simulation using CFD software FlowVision. Helicity distribution in rotating fluid layer with localized heat source was analysed. Two mechanisms which play role in helicity generation are found. The first one is the strong correlation of cyclonic vortex and intensive upward motion in the central part of the vessel. The second one is due to large gradients of velocity on the periphery. The integral helicity in the considered case is substantial and its relative level is high.

Przejdź do artykułu

Bibliografia

[1] G.P. Bogatyrev. Excitation of a cyclonic vortex or a laboratory model for a tropical cyclone. Journal of Experimental and Theoretical Physics Letters, 51(11):630–633, 1990.
[2] G.P. Bogatyrev and B.L. Smorodin. Physical model of the rotation of a tropical cyclone. Journal of Experimental and Theoretical Physics Letters, 63(1):28–32, 1996. doi: 10.1134/1.566958.
[3] G.P. Bogatyrev, I.V. Kolesnichenko, G.V. Levina and A.N. Sukhanovsky. Laboratory model of generation of a large-scale spiral vortex in a convectively unstable rotating fluid. Izvestiya, Atmospheric and Oceanic Physics, 42(4): 423–429, 2006. doi: 10.1134/S0001433806040025.
[4] V. Batalov, A. Sukhanovsky and Frick P. Laboratory study of differential rotation in a convective rotating layer. Geophysical & Astrophysical Fluid Dynamics, 104(4):349–368, 2010. doi: 10.1080/03091921003759876.
[5] A. Sukhanovskii, A. Evgrafova and E. Popova. Laboratory study of a steady-state convective cyclonic vortex. Quarterly Journal of the Royal Meteorological Society, 142(698):2214–2223, 2016. doi: 10.1002/qj.2823.
[6] S.S. Moiseev, R.Z. Sagdeev, A.V. Tur, G.A. Khomenko, and A.M. Shukurov. Physical mechanism of amplification of vortex disturbances in the atmosphere, Soviet Phys. Dokl. 28:926–928, 1983.
[7] E. Levich and E. Tzvetkov. Helical cyclogenesis. Physics Letters A, 100(1):53–56, 1984. doi: 10.1016/0375-9601(84)90354-2.
[8] E. Levich and E. Tzvetkov. Helical inverse cascade in three-dimensional turbulence as a fundamental dominant mechanism in mesoscale atmospheric phenomena. Physics Reports, 128(1): 1–37, 1985. doi: 10.1016/0370-1573(85)90036-5.
[9] D.K. Lilly. The structure, energetics and propagation of rotating convective storms. Part II: Helicity and storm stabilization. Journal of Atmospheric Sciences, 43(2):126–140, 1986.
[10] A. Eidelman, T. Elperin, I. Gluzman, and E. Golbraikh. Helicity of mean and turbulent flow with coherent structures in Rayleigh-Bénard convective cell. Physics of Fluids, 26(6), 2014. doi: 10.1063/1.4881939.
[11] F. Scarano and M.L. Riethmuller. Advances in iterative multigrid PIV image processing. Experiments in Fluids, 29(Suppl1):S051–S060, 2000. doi: 10.1007/s003480070007.
[12] A. Sukhanovskii, A. Evgrafova and E. Popova. Horizontal rolls over localized heat source in a cylindrical layer. Physica D: Nonlinear Phenomena, 316:23–33, 2016. doi: 10.1016/j.physd.2015.11.007.
[13] H.K. Moffat. Magnetic Field Generation in Electrically Conducting Fluids. Cambridge University Press, Cambridge, 1978.
[14] R. Stepanov, E. Golbraikh, P. Frick and A. Shestakov. Hindered energy cascade in highly helical isotropic turbulence. Physical Review Letters, 115(23):234501, 2015. doi: 10.1103/PhysRevLett.115.234501.
[15] A.V. Evgrafova, G.V. Levina and A.N. Sukhanovskii. Study of vorticity and helicity distribution in advective flow with secondary structures. Computational Continuum Mechanics, 6(4):451–459, 2013. doi: 10.7242/1999-6691/2013.6.4.49 (in Russian).
Przejdź do artykułu

Autorzy i Afiliacje

A. Sukhanovskii
1
A. Evgrafova
1
E. Popova
1

  1. Institute of Continuous Media Mechanics, Perm, Russia
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

While modeling water dynamics in dam reservoirs, it is usually assumed that the flow involves the whole water body. It is true for shallow reservoirs (up to several meters of depth) but may be false for deeper ones. The possible presence of a thermocline creates an inactive bottom layer that does not move, causing all the discharge to be carried by the upper strata. This study compares the results of hydrodynamic simulations performed for the whole reservoir to the ones carried out for the upper strata only. The validity of a non-stratified flow approximation is then discussed.

Przejdź do artykułu

Bibliografia

[1] A. Bojarski, M. Cebulska, L. Lewicki, S. Mazon, G. Mazurkiewicz-Boron, E. Nachlik, P. Opalinski, P. Przecherski and S. Rybicki. Long- and short time perspectives for the usage of the Dobczyce reservoir. Cracow, Poland, 2012. (in Polish).
[2] J. Starmach and G. Mazurkiewicz-Boron (Eds). Dobczyce Reservoir Ecology-Eutrophication-Protection. Dept. of Freshwater Biology, Institute of Nature Conservation, Polish Academy of Sciences, Cracow, Poland, 2000. (in Polish).
[3] P. Hachaj. Numerical modelling of pollution transport phenomena in the lake of Dobczyce. In P.M. Rowinski, editor, Hydraulic Methods for Catastrophes: Floods, Droughts, Environmental Disasters, Publications of the Institute of Geophysics, Polish Academy of Sciences. E –Hydrology (formerly Water Resources), E-10(406):47-54, 2008.
[4] P. Hachaj, L. Lewicki, E. Nachlik and T. Siuta. Effectiveness of hydrodynamic models in assessment of dammed reservoir dynamics. Gospodarka Wodna, 8:286-288, 2014. (in Polish).
[5] P. Hachaj. Modelling of a two-dimensional velocity field for the water flow in the lake of Dobczyce. In P.M. Rowinski, editor, Transport Phenomena in Hydraulics, Publications of the Institute of Geophysics, Polish Academy of Sciences. E – Hydrology (formerly Water Resources), E-7(401):87-95, 2007.
[6] M. Gałek. Sensitivity analysis of the FESWMS model applied to the Dobczyce Reservoir. M.Sc. Thesis. Carcow University of Technology, Poland, 2010. (in Polish).
[7] R.C. Berger, J.N. Tate, G.L. Brown and G. Savant. Adaptive hydraulics users manual. AQUAVEO, 2010.
[8] K. Winters. Adaptive hydraulics – 2D shallow water flow model interface within the surfacewater modeling system. M.Sc. Thesis. Brigham Young University, Provo, UT, USA, 2008.
[9] M. Gałek and P. Hachaj. Application of theRMA2/RMA4models to simulate pollution transport in a retention reservoir. In P. Rowinski, editor, Experimental and Computational Solutions of Hydraulic Problems. GeoPlanet: Earth and Planetary Science, pages 301-313, Springer, 2013. doi: 10.1007/978-3-642-30209-1_21.
[10] P. Hachaj and M.Tutro. Flow patterns for dryling and wetting of a retention reservoir bed –umerical modeling. I nfrastructure and Ecology of Rural Areas, IV(3):1407-1419, 2014. doi: 10.14597/infraeco.2014.4.3.106.
[11] P. S. Hachaj, M. Szlapa and M. Tutro. Numerical modeling of sub-glacial flow in a retention reservoir. Technical Transactions; Environment Enginering, 1-S(18):37-51, Cracow University of Technology, 2015. doi: 10.4467/2353737XCT.15.182.4387.
[12] A. Bojarski, Z. Gręplowska and E. Nachlik. Goczałkowice Reservoir. Cause and effect DPSIR analysis of processes and important phenomena from the viewpoint of managing dam reservoir. Cracow University of Technology, Monograph No. 420. 2012. (in Polish).
[13] K. Witek. Water flow simulations in the Tresna reservoir using the AdH numerical model. B.Eng. Thesis, Cracow University of Technology, Poland, 2013. (in Polish).
[14] A. Saggio and J. Imberger. Mixing and turbulent fluxes in the metalimnion of stratified lake. Limnology and Oceanography, 46(2):392-409, 2001.
Przejdź do artykułu

Autorzy i Afiliacje

Paweł S. Hachaj
1
Monika Szlapa
1

  1. Institute of Water Engineering and Water Management, Cracow University of Technology, Poland
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Small-scale vertical-axis wind turbines can be used as a source of electricity in rural and urban environments. According to the authors’ knowledge, there are no validated simplified aerodynamic models of these wind turbines, therefore the use of more advanced techniques, such as for example the computational methods for fluid dynamics is justified. The paper contains performance analysis of the small-scale vertical-axis wind turbine with a large solidity. The averaged velocity field and the averaged static pressure distribution around the rotor have been also analyzed. All numerical results presented in this paper are obtained using the SST k-ω turbulence model. Computed power coefficients are in good agreement with the experimental results. A small change in the tip speed ratio significantly affects the velocity field. Obtained velocity fields can be further used as a base for simplified aerodynamic methods.

Przejdź do artykułu

Bibliografia

[1] B.F. Blackwell. The vertical-axis wind turbine “How it works”. Energy Report, SLA-74-0160, Sandia Laboratories, 1974.
[2] K. Jankowski. Vertical axis turbine of Darrieus h-type with variable blade incidence angle concept design. M.Sc. Thesis, Warsaw University of Technology, Poland, 2009.
[3] I. Paraschivoiu. Wind Turbine Design: With Emphasis on Darrieus Concept. Polytechnic International Press, Canada, 2002.
[4] I. Paraschivoiu, O. Trifu, and Saeed F. H-Darrieus wind turbine with blade pitch control. International Journal of Rotating Machinery, 2009:ID 505343, 2009. doi: 10.1155/2009/505343.
[5] R. Bravo, S. Tullis, and S. Ziada. Performance testing of a small vertical-axis wind turbine. In Proceedings of the 21st Canadian Congress of Applied Mechanics CANCAM, Toronto, Canada, 7-9 June 2007.
[6] M.R. Islam, S. Mekhilef, and R. Saidur. Progress and recent trends of wind energy technology. Renewable and Sustainable Energy Reviews, 21:456–468, 2013. doi: 10.1016/j.rser.2013.01.007.
[7] F. Scheurich, T.M. Fletcher, and R.E. Brown. The influence of blade curvature and helical blade twist on the performance of a vertical-axis wind turbine. In 4 8th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition, Orlando, USA, 4-7 Jan. 2010. doi: 10.2514/6.2010-1579.
[8] H.A. Madsen, T.J. Larsen, U.S. Paulsen, and L. Vita. Implementation of the actuator cylinder flow model in the HAWC2 code for aeroelastic simulations on vertical axis wind turbines. In Proceedings of 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Dallas, USA, 7-10 Jan. 2013. doi: 10.2514/6.2013-913.
[9] W. Tjiu, T. Marnoto, S. Mat, M.H. Ruslan, and K. Sopian. Darrieus vertical axis wind turbine for power generation II: Challenges in HAWT and the opportunity of multimegawatt Darrieus VAWT development. Renewable Energy, 75:560–571, March 2015. doi: 10.1016/j.renene.2014.10.039.
[10] M. Islam, D.S.K. Ting, and A. Fartaj. Aerodynamic models for Darrieus-type straight-bladed vertical axis wind turbines. Renewable and Sustainable Energy Reviews, 12(4):1087–1109, 2008. doi: 10.1016/j.rser.2006.10.023.
[11] M Abdul Akbar and V Mustafa. A new approach for optimization of vertical axis wind turbines. Journal of Wind Engineering and Industrial Aerodynamics, 153:34–45, 2016. doi: 10.1016/j.jweia.2016.03.006.
[12] J.H. Strickland, T. Smith, and K. Sun. A vortex model of the Darrieus turbine: An analytical and experimental study. Report SAND81-7017, Sandia National Laboratories, 1981.
[13] C.S. Ferreira, H.A. Madsen, M. Barone, B. Roscher, P. Deglaire, and I. Arduin. Comparison of aerodynamic models for vertical axis wind turbines. Journal of Physics: Conference Series, 524(1):012125, 2014. doi: 10.1088/1742-6596/524/1/012125.
[14] P. Lichota and D.A. Noreña. A priori model inclusion in the multisine maneuver design. In 17th International Carpathian Control Conference (ICCC), pages 440–445, Tatranska Lomnica, Slovakia, 29 May – 1 June 2016. doi: 10.1109/CarpathianCC.2016.7501138.
[15] A. Allet, S. Hallé, and I. Paraschivoiu. Numerical simulation of dynamic stall around an airfoil in Darrieus motion. Journal of Solar Energy Engineering, 121:69–76, 1999. 10.1115/1.2888145.
[16] C.S. Ferreira, H. Bijl, G. van Bussel, and G. van Kuik. Simulating dynamic stall in a 2D VAWT: modeling strategy, verification and validation with particle image velocimetry data. Journal of Physics: Conference Series, 75:012023, 2007. doi: 10.1088/1742-6596/75/1/012023.
[17] E. Amet, T. Maître, C. Pellone, and J.L. Achard. 2D numerical simulations of blade-vortex interaction in a Darrieus turbine. Journal of Fluids Engineering, 131(11):111103, 2009. doi: 10.1115/1.4000258.
[18] W.Z. Shen, J.H. Zhang, and J.N. Sørensen. The actuator surface model: a new Navier-Stokes based model for rotor computations. Journal of Solar Energy Engineering, 131(1):011002, 2009. doi: 10.1115/1.3027502.
[19] F. Schuerich and R.E. Brown. Effect of dynamic stall on the aerodynamics of vertical-axis wind turbines. AIAA Journal, 49(11):2511–2521, 2011. doi: 10.2514/1.J051060.
[20] A. Laneville and P. Vittecoq. Dynamic stall: the case of the vertical axis wind turbine. Journal of Solar Energy Engineering, 108(2):140–145, 1986. doi: 10.1115/1.3268081.
[21] M.C. Claessens. The Design and Testing of Airfoils for Application in Small Vertical Axis Wind Turbines. M.Sc. Thesis, Delft University of Technology, The Netherlands, 2006.
[22] P. Marsh, D. Ranmuthugala, I. Penesis, and G. Thomas. Three dimensional numerical simulations of a straight-bladed vertical axis tidal turbine. In 1 8th Australasian Fluid Mechanics Conference, Launceston, Australia, 3-7 December 2012.
[23] K. Rogowski. Analysis of Performance of the Darrieus Wind Turbines. Ph.D. Thesis, Warsaw University of Technology, Poland, 2014.
[24] K. Rogowski and R. Maronski. CFD computation of the Savonius rotor. Journal of Theoretical and Applied Mechanics, 53(1):37–45, 2015. doi: 10.15632/jtam-pl.53.1.37
[25] F.R. Menter. Two-equation eddy-viscosity turbulence models for engineering applications. AIAA Journal, 32(8):1598–1605, 1994. doi: 10.2514/3.12149.
[26] O. Guerri, A. Sakout, and K. Bouhadef. Simulations of the fluid flow around a rotating vertical axis wind turbine. Wind Engineering, 31(3):149–163, 2007. doi: 10.1260/030952407781998819.
[27] F. Scheurich, T.M. Fletcher, and R.E. Brown. Simulating the aerodynamic performance and wake dynamics of a vertical-axis wind turbine. Wind Energy, 14(2):159–177, 2011. doi: 10.1002/we.409.
Przejdź do artykułu

Autorzy i Afiliacje

Krzysztof Rogowski
1
Ryszard Maroński
1
Janusz Piechna
1

  1. Institute of Aeronautics and Applied Mechanics, Warsaw University of Technology, Poland.
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The article investigates the influence of the carbody vertical flexibility on the ride comfort of the railway vehicles. The ride comfort is evaluated via the comfort index calculated in three reference points of the carbody. The results of the numerical simulations bring attention to the importance of the carbody symmetrical vertical bending upon the dynamic response of the vehicle, mainly at high velocities. Another conclusion is that the ride comfort can be significantly affected as a function of the symmetrical bending frequency of the carbody. Similarly, there are improvement possibilities for the ride comfort when the best selection of the stiffness in the longitudinal traction system between the carbody and bogie and the vertical suspension damping is made.

Przejdź do artykułu

Bibliografia

[1] M. Dumitriu and I. Sebeşan. The quality of railway vehicles. MatrixRom, Bucharest, 2016. (in Romanian).
[2] J. Zhou, R. Goodall, L. Ren, and H. Zhang. Influences of car body vertical flexibility on ride quality of passenger railway vehicles. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 223(5):461–471, 2009. doi: 10.1243/09544097JRRT272.
[3] G. Diana, F. Cheli, A. Collina, R. Corradi, and S. Melzi. The development of a numerical model for railway vehicles comfort assessment through comparison with experimental measurements. Vehicle System Dynamics, 38(3):165–183, 2002. doi: 10.1076/vesd.38.3.165.8287.
[4] F. Cheli and R. Corradi. On rail vehicle vibrations induced by track unevenness: Analysis of the excitation mechanism. Journal of Sound and Vibration, 330(15):3744–3765, 2011. doi: 10.1016/j.jsv.2011.02.025.
[5] D. Gong, J. Zhou, and W. Sun. On the resonant vibration of a flexible railway car body and its suppression with a dynamic vibration absorber. Journal of Vibration and Control, 19(5):649–657, 2013. doi: 10.1177/1077546312437435.
[6] M. Dumitriu. Analysis of the dynamic response in the railway vehicles to the track vertical irregularities. Part II: The numerical analysis. Journal of Engineering Science and Technology Review, 8(4):32–39, 2015.
[7] P. Carlbom. Carbody and Passengers in Rail Vehicle Dynamics. Ph.D. Thesis, KTH, Vehicle Engineering, Stockholm, Sweden, 2000. NR 20140805.
[8] T. Tomioka, T. Takigami, and Y. Suzuki. Numerical analysis of three-dimensional flexural vibration of railway vehicle car body. Vehicle System Dynamics, 44(sup1):272–285, 2006. doi: 10.1080/00423110600871301.
[9] M. Dumitriu. On the critical points of vertical vibration in a railway vehicle. Archive of Mechanical Engineering, 61(4):609–625, 2014. doi: 10.2478/meceng-2014-0035.
[10] ENV 12299: Railway applications ride comfort for passengers measurement and evaluation, 1997.
[11] UIC 513 R: Guidelines for evaluating passenger comfort in relation to vibration in railway vehicle. International Union of Railways, 1994.
[12] S. Bruni, J. Vinolas, M. Berg, O. Polach, and S. Stichel. Modelling of suspension components in a rail vehicle dynamics context. Vehicle System Dynamics, 49(7):1021–1072, 2011. doi: 10.1080/00423114.2011.586430.
[13] H. Ye, J. Zeng, Q. Wang, and X. Han. Study on carbody flexible vibration considering layout of underneath equipment and doors. In Proceedings of 4th International Conference on Sensors, Measurement and Intelligent Materials (ICSMIM 2015), pages 1177–1183, Shenzhen, China, 27-28 Dec. 2015. Atlanitis Press, 2016. doi : 10.2991/icsmim-15.2016.217.
[14] K. Wang, H. Xia, M. Xu, and W. Guo. Dynamic analysis of train-bridge interaction system with flexible car-body. Journal of Mechanical Science and Technology, 29(9):3571–3580, 2015. doi: 10.1007/s12206-015-0801-y.
[15] C 116: Interaction between vehicles and track, RP 1, Power spectral density of track irregulari- ties, Part 1: Definitions, conventions and available data, 1971.
[16] I. Sebeşan and T. Mazilu. Vibrations of the railway vehicles. MatrixRom, Bucharest, 2010. (in Romanian).
[17] J. Zhou and S. Wenjing. Analysis on geometric filtering phenomenon and flexible car body resonant, vibration of railway vehicles. Journal of Tongji University, Natural Science, 37(12):1653–1657, 2009.
[18] D. Gong, Y.J. Gu, and J.S. Zhou. Study on geometry filtering phenomenon and flexible car body resonant vibration of articulated trains. In Advanced Materials Researches, Engineering and Manufacturing Technologies in Industry, volume 787 of Advanced Materials Research, pages 542–547. Trans Tech Publications, Nov. 2013. doi: 10.4028/www.scientific.net/AMR.787.542.
[19] F. Cheli and R. Corradi. On rail vehicle vibrations induced by track unevenness: Analysis of the excitation mechanism. Journal of Sound and Vibration, 330(15):3744–3765, 2011. doi: 10.1016/j.jsv.2011.02.025.
[20] M. Dumitriu. Geometric filtering effect of vertical vibrations of railway vehicles. Analele Universităţii “Eftimie Murgu” Resiţa, (1):48–61, 2012.
[21] M. Dumitriu. Considerations on the geometric filtering effect of the bounce and pitch movements in railway vehicles. Annals of the Faculty of Engineering Hunedoara, 12(3):155–164, 2014.
Przejdź do artykułu

Autorzy i Afiliacje

Mădălina Dumitriu
1
Cătălin Cruceanu
1

  1. Department of Railway Vehicles, University Politehnica of Bucharest, Romania
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

In this paper, nonlinear free vibration analysis of micro-beams resting on the viscoelastic foundation is investigated by the use of the modified couple stress theory, which is able to capture the size effects for structures in micron and sub-micron scales. To this aim, the gov-erning equation of motion and the boundary conditions are derived using the Euler–Bernoulli beam and the Hamilton’s principle. The Galerkin method is employed to solve the governing nonlinear differential equation and obtain the frequency-amplitude algebraic equation. Final-ly, the effects of different parameters, such as the mode number, aspect ratio of length to height, the normalized length scale parameter and foundation parameters on the natural fre-quency-amplitude curves of doubly simply supported beams are studied.

Przejdź do artykułu

Bibliografia

[1] W. Faris, E. Abdel-Rahman, and A. Nayfeh. Mechanical behavior of an electrostatically actuated micropump. In 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Denver, Colorado, 22-25 April 2002. doi: 10.2514/6.2002-1303.
[2] X.M. Zhang, F.S. Chau, C. Quan, Y.L. Lam, and A.Q. Liu. A study of the static characteristics of a torsional micromirror. Sensors and Actuators A: Physical, 90(1):73–81, 2001. doi: 10.1016/S0924-4247(01)00453-8.
[3] X. Zhao, E. M. Abdel-Rahman, and A.H. Nayfeh. A reduced-order model for electrically actuated microplates. Journal of Micromechanics and Microengineering, 14(7):900–906, 2004. doi: 10.1088/0960-1317/14/7/009.
[4] H.A.C. Tilmans and R. Legtenberg. Electrostatically driven vacuum-encapsulated polysilicon resonators: Part II. Theory and performance. Sensors and Actuators A: Physical, 45(1):67–84, 1994. doi: 10.1016/0924-4247(94)00813-2.
[5] N.A. Fleck, G.M. Muller, M.F. Ashby, and J.W. Hutchinson. Strain gradient plasticity: theory and experiment. Acta Metallurgica et Materialia, 42(2):475–487, 1994. doi: 10.1016/0956-7151(94)90502-9.
[6] J.S. Stölken and A.G. Evans. A microbend test method for measuring the plasticity length scale. Acta Materialia, 46(14):5109–5115, 1998. doi: 10.1016/S1359-6454(98)00153-0.
[7] A.C.l. Eringen. Nonlocal polar elastic continua. International Journal of Engineering Science, 10(1):1–16, 1972. doi: 10.1016/0020-7225(72)90070-5.
[8] D.C.C. Lam, F. Yang, A.C.M. Chong, J. Wang, and P. Tong. Experiments and theory in strain gradient elasticity. Journal of the Mechanics and Physics of Solids, 51(8):1477–1508, 2003. doi: 10.1016/S0022-5096(03)00053-X.
[9] R.A. Toupin. Elastic materials with couple-stresses. Archive for Rational Mechanics and Analysis, 11(1):385–414, 1962. doi: 10.1007/BF00253945.
[10] F. Yang, A.C.M. Chong, D.C.C. Lam, and P. Tong. Couple stress based strain gradient theory for elasticity. International Journal of Solids and Structures, 39(10):2731–2743, 2002. doi: 10.1016/S0020-7683(02)00152-X.
[11] J.N. Reddy. Nonlocal nonlinear formulations for bending of classical and shear deformation theories of beams and plates. International Journal of Engineering Science, 48(11):1507–1518, 2010. doi: 10.1016/j.ijengsci.2010.09.020.
[12] J.N. Reddy. Nonlocal theories for bending, buckling and vibration of beams. International Journal of Engineering Science, 45(2-8):288–307, 2007. doi: 10.1016/j.ijengsci.2007.04.004.
[13] E. Taati, M. Molaei, and J.N. Reddy. Size-dependent generalized thermoelasticity model for Timoshenko micro-beams based on strain gradient and non-Fourier heat conduction theories. Composite Structures, 116:595–611, 2014. doi: 10.1016/j.compstruct.2014.05.040.
[14] H.M. Sedighi, A. Koochi, and M. Abadyan. Modeling the size dependent static and dynamic pull-in instability of cantilever nanoactuator based on strain gradient theory. International Journal of Applied Mechanics, 06(05):1450055, 2014. doi: 10.1142/S1758825114500550.
[15] M. Molaei, M.T. Ahmadian, and E. Taati. Effect of thermal wave propagation on thermoelastic behavior of functionally graded materials in a slab symmetrically surface heated using analytical modeling. Composites Part B: Engineering, 60:413–422, 2014. doi: 10.1016/j.compositesb.2013.12.070.
[16] M. Molaei Najafabadi, E. Taati, and H. Basirat Tabrizi. Optimization of functionally graded materials in the slab symmetrically surface heated using transient analytical solution. Journal of Thermal Stresses, 37(2):137–159, 2014. doi: 10.1080/01495739.2013.839617.
[17] L.L. Ke and Y.S. Wang. Size effect on dynamic stability of functionally graded microbeams based on a modified couple stress theory. Composite Structures, 93(2):342–350, 2011. doi: 10.1016/j.compstruct.2010.09.008.
[18] L.L. Ke, Y.S. Wang, J. Yang, and S. Kitipornchai. Nonlinear free vibration of size-dependent functionally graded microbeams. International Journal of Engineering Science, 50(1):256–267, 2012. doi: 10.1016/j.ijengsci.2010.12.008.
[19] S.K. Park and X.L. Gao. Bernoulli–Euler beam model based on a modified couple stress theory. Journal of Micromechanics and Microengineering, 16(11):2355, 2006. http://stacks.iop.org/0960-1317/16/i=11/a=015.
[20] S. Kong, S. Zhou, Z. Nie, and K. Wang. The size-dependent natural frequency of Bernoulli–Euler micro-beams. International Journal of Engineering Science, 46(5):427–437, 2008. doi: 10.1016/j.ijengsci.2007.10.002.
[21] E. Taati, M. Nikfar, and M.T. Ahmadian. Formulation for static behavior of the viscoelastic Euler-Bernoulli micro-beam based on the modified couple stress theory. In ASME 2012 International Mechanical Engineering Congress and Exposition; Vol. 9: Micro- and Nano-Systems Engineering and Packaging, Parts A and B, pages 129–135, Houston, Texas, USA, 9-15 November 2012. doi: 10.1115/IMECE2012-86591.
[22] H.M. Ma, X.L. Gao, and J.N. Reddy. A microstructure-dependent Timoshenko beam model based on a modified couple stress theory. Journal of the Mechanics and Physics of Solids, 56(12):3379–3391, 2008. doi: 10.1016/j.jmps.2008.09.007.
[23] M. Asghari and E. Taati. A size-dependent model for functionally graded micro-plates for mechanical analyses. Journal of Vibration and Control, 19(11):1614–1632, 2013. doi: 10.1177/1077546312442563.
[24] J.N. Reddy and J. Kim. A nonlinear modified couple stress-based third-order theory of functionally graded plates. Composite Structures, 94(3):1128–1143, 2012. doi: 10.1016/j.compstruct.2011.10.006.
[25] E. Taati, M. Molaei Najafabadi, and H. Basirat Tabrizi. Size-dependent generalized thermoelasticity model for Timoshenko microbeams. Acta Mechanica, 225(7):1823–1842, 2014. doi: 10.1007/s00707-013-1027-7.
[26] H.T. Thai and D.H. Choi. Size-dependent functionally graded Kirchhoff and Mindlin plate models based on a modified couple stress theory. Composite Structures, 95:142–153, 2013. doi: 10.1016/j.compstruct.2012.08.023.
[27] E. Taati. Analytical solutions for the size dependent buckling and postbuckling behavior of functionally graded micro-plates. International Journal of Engineering Science, 100:45–60, 2016. doi: 10.1016/j.ijengsci.2015.11.007.
[28] M.A. Eltaher, A.E. Alshorbagy, and F.F. Mahmoud. Vibration analysis of Euler–Bernoulli nanobeams by using finite element method. Applied Mathematical Modelling, 37(7):4787–4797, 2013. doi: 10.1016/j.apm.2012.10.016.
[29] B. Akgöz and Ö. Civalek. Bending analysis of FG microbeams resting on Winkler elastic foundation via strain gradient elasticity. Composite Structures, 134:294–301, 2015. doi: 10.1016/j.compstruct.2015.08.095.
[30] N. Togun and S.M. Bağdatlı. Nonlinear vibration of a nanobeam on a Pasternak elastic foundation based on non-local Euler-Bernoulli beam theory. Mathematical and Computational Applications, 21(1):3, 2016.
[31] B. Akgöz and Ö. Civalek. A novel microstructure-dependent shear deformable beam model. International Journal of Mechanical Sciences, 99:10–20, 2015. doi: 10.1016/j.ijmecsci.2015.05.003.
[32] B. Akgöz and Ö. Civalek. A new trigonometric beam model for buckling of strain gradient microbeams. International Journal of Mechanical Sciences, 81:88–94, 2014. doi: 10.1016/j.ijmecsci.2014.02.013.
[33] N. Shafiei, M. Kazemi, and M. Ghadiri. Nonlinear vibration of axially functionally graded tapered microbeams. International Journal of Engineering Science, 102:12–26, 2016. doi: 10.1016/j.ijengsci.2016.02.007.
[34] R. Ansari, V. Mohammadi, M.F. Shojaei, R. Gholami, and H. Rouhi. Nonlinear vibration analysis of Timoshenko nanobeams based on surface stress elasticity theory. European Journal of Mechanics – A/Solids, 45:143–152, 2014. doi: 10.1016/j.euromechsol.2013.11.002.
[35] Yong-Gang Wang, Wen-Hui Lin, and Ning Liu. Nonlinear free vibration of a microscale beam based on modified couple stress theory. Physica E: Low-dimensional Systems and Nanostructures, 47:80–85, 2013. doi: 10.1016/j.physe.2012.10.020.
Przejdź do artykułu

Autorzy i Afiliacje

Jafar Eskandari Jam
1
Milad Noorabadi
1
Nader Namdaran
1

  1. Composite Materials and Technology Cente, Malek Ashtar University of Technology, Tehran, Iran
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The present work focuses on a first study for a piezoelectric harvesting system, finalized to the obtaining of electrical energy from the kinetic energy of rainy precipitation, a renewable energy source not really considered until now. The system, after the realization, can be collocated on the roof of an house, configuring a “Piezo Roof Harvesting System”. After presenting a state of art of the harvesting systems from environmental energy, linked to vibrations, using piezoelectric structures, and of piezoelectric harvesting systems functioning with rain, the authors propose an analysis of the fundamental features of rainy precipitations for the definition of the harvesting system. Then, four key patterns for the realization of a piezoelectric energy harvesting system are discussed and analysed, arriving to the choice of a cantilever beam scheme, in which the piezoelectric material works in 31 mode. An electro-mechanical model for the simulation of performance of the unit for the energetic conversion, composed of three blocks, is proposed. The model is used for a simulation campaign to perform the final choice of the more suitable piezoelectric unit, available on the market, which will be adopted for the realization of the “Piezo Roof Harvesting System”.

Przejdź do artykułu

Bibliografia

[1] Annual Energy Outlook 2013. Report, Energy Information Administration, Washington, DC, USA, 2013.
[2] B.S. Lee, J.J. He, W.J. Wu, and W.P. Shih. MEMS generator of power harvesting by vibrations using piezoelectric cantilever beam with digitate electrode. In Proceedings SPIE, Smart Structures and Materials 2006: Damping and Isolation, volume 6169, page 61690B, March, 15 2006. doi: 10.1117/12.658584.
[3] C.S. Lee, J. Joo, S. Han, J.H. Lee, and S.K. Koh. Poly (vinylidene fluoride) transducers with highly conducting poly (3, 4-ethylenedioxythiophene) electrodes. Synthetic Metals, 152(1-3):49–52, 2005. doi: 10.1016/j.synthmet.2005.07.116.
[4] F. Mohammadi, A. Khan, and R.B. Cass. Power generation from piezoelectric lead zirconate titanate fiber composites. In Materials Research Society Proceedings, volume 736, page D5.5, 2002. doi: 10.1557/PROC-736-D5.5.
[5] H.A. Sodano, J.M. Lloyd, and D.J. Inman. An experimental comparison between several active composite actuators for power generation. In Proceedings SPIE, Smart Structures and Materials 2004: Smart Structures and Integrated Systems, volume 5390, pages 370–378, July 26 2004. doi: 10.1117/12.540192.
[6] H.A. Sodano, D.J. Inman, and G. Park. A review of power harvesting from vibration using piezoelectric materials. Shock and Vibration Digest, 36(3):197–205, 2004.
[7] H.A. Sodano, G. Park, and D.J. Inman. Estimation of electric charge output for piezoelectric energy harvesting. Strain, 40(2):49–58, 2004. doi: 10.1111/j.1475-1305.2004.00120.x.
[8] J. Baker, S. Roundy, and P. Wright. Alternative geometries for increasing power density in vibration energy scavenging for wireless sensor networks. In 3rd International Energy Conversion Engineering Conference, page 5617, San Francisco, CA, USA, 16-18 August 2005. doi: 10.2514/6.2005-5617.
[9] S. R Platt, S. Farritor, and H. Haider. On low-frequency electric power generation with PZT ceramics. IEEE/ASME Transactions on Mechatronics, 10(2):240–252, 2005. doi: 10.1109/TMECH.2005.844704.
[10] T.H. Ng and W.H. Liao. Sensitivity analysis and energy harvesting for a self-powered piezoelectric sensor. Journal of Intelligent Material Systems and Structures, 16(10):785–797, 2005. doi: 10.1177/1045389X05053151.
[11] S. Roundy. On the effectiveness of vibration-based energy harvesting. Journal of Intelligent Material Systems and Structures, 16(10):809–823, 2005. doi: 10.1177/1045389X05054042.
[12] D. Benasciutti, E. Brusa, L. Moro, and S. Zelenika. Optimised piezoelectric energy scavengers for elder care. In Proceedings of European Society Precision Engineering & Nanotech (EUSPEN) Conference, pages 41–45, Zurich, Switzerland, May 2008.
[13] L. Mateu and F. Moll. Optimum piezoelectric bending beam structures for energy harvesting using shoe inserts. Journal of Intelligent Material Systems and Structures, 16(10):835–845, 2005. doi: 10.1177/1045389X05055280.
[14] K. Mossi, C. Green, Z. Ounaies, and E. Hughes. Harvesting energy using a thin unimorph prestressed bender: geometrical effects. Journal of Intelligent Material Systems and Structures, 16(3):249–261, 2005. doi: 10.1177/1045389X05050008.
[15] M. Ericka, D. Vasic, F. Costa, G. Poulin, and S. Tliba. Energy harvesting from vibration using a piezoelectric membrane. In Journal de Physique IV (Proceedings), volume 128, pages 187–193, September 2005. doi: 10.1051/jp4:2005128028.
[16] S. Kim, W. W Clark, and Q.M. Wang. Piezoelectric energy harvesting with a clamped circular plate: analysis. Journal of intelligent Material Systems and Structures, 16(10):847–854, 2005. doi: 10.1177/1045389X05054044.
[17] S. Kim, W. W Clark, and Q.M. Wang. Piezoelectric energy harvesting with a clamped circular plate: experimental study. Journal of Intelligent Material Systems and Structures, 16(10):855–863, 2005. doi: 10.1177/1045389X05054043.
[18] J. Han, A. von Jouanne, T. Le, K. Mayaram, and T.S. Fiez. Novel power conditioning circuits for piezoelectric micropower generators. In Applied Power Electronics Conference and Exposition, 2004. APEC’04. Nineteenth Annual IEEE, volume 3, pages 1541–1546, 2004. doi: 10.1109/APEC.2004.1296069.
[19] E. Lefeuvre, A. Badel, C. Richard, L. Petit, and D. Guyomar. A comparison between several vibration-powered piezoelectric generators for standalone systems. Sensors and Actuators A: Physical, 126(2):405–416, 2006. doi: 10.1016/j.sna.2005.10.043.
[20] A. Preumont. Mechatronics. Dynamics of Electromechanical and Piezoelectric Systems, volume 136. Springer, 2006. doi: 10.1007/1-4020-4696-0.
[21] R. Guigon, J.J. Chaillout, T. Jager, and G. Despesse. Harvesting raindrop energy: theory. Smart Materials and Structures, 17(1):015038, 2008. doi: 10.1088/0964-1726/17/01/015038.
[22] R. Guigon, J.J. Chaillout, T. Jager, and G. Despesse. Harvesting raindrop energy: experimental study. Smart Materials and Structures, 17(1):015039, 2008. doi: 10.1088/0964-1726/17/01/015039.
[23] P.V. Biswas, M.A. Uddin, M.A. Islam, M.A.R. Sarkar, V.G. Desa, M.H. Khan, and A.M.A. Huq. Harnessing raindrop energy in Bangladesh. In Proceedings of the International Conference on Mechanical Engineering, Dhaka, Bangladesh, 26-29 December 2009. Paper: ICME09-AM-29.
[24] J.S. Marshall andW. Mc K. Palmer. The distribution of raindrops with size. Journal of Meteorology, 5(4):165–166, 1948. doi: 10.1175/1520-0469(1948)0050165:TDORWS>2.0.CO;2.
[25] J.S. Marshall, R.C. Langille, and W. Mc K. Palmer. Measurement of rainfall by radar. Journal of Meteorology, 4(6):186–192, 1947. doi: 10.1175/1520-0469(1947)0040186:MORBR>2.0.CO;2.
[26] J.O. Laws and D.A. Parsons. The relation of raindrop-size to intensity. Eos, Transactions American Geophysical Union, 24(2):452–460, 1943. doi: 10.1029/TR024i002p00452.
[27] J.W. Ryde. The attenuation and radar echoes produced at centimetre wave-lengths by various meteorological phenomena. In Report of a conference on Meteorological factors in radiowave propagation, pages 169–188, The Physical Society and the Royal Meteorological Society, London, 8 April 1946.
[28] A.C. Best. The size distribution of raindrops. Quarterly Journal of the Royal Meteorological Society, 76(327):16–36, 1950. doi: 10.1002/qj.49707632704.
[29] R. S Sekhon and R.C. Srivastava. Doppler radar observations of drop-size distributions in a thunderstorm. Journal of the Atmospheric Sciences, 28(6):983–994, 1971. doi: 10.1175/1520-0469(1971)0280983:DROODS>2.0.CO;2.
[30] P.T. Willis. Functional fits to some observed drop size distributions and parameterization of rain. Journal of the Atmospheric Sciences, 41(9):1648–1661, 1984. doi: 10.1175/1520-0469(1984)0411648:FFTSOD>2.0.CO;2.
[31] G. Feingold and Z. Levin. The lognormal fit to raindrop spectra from frontal convective clouds in Israel. Journal of Climate and Applied Meteorology, 25(10):1346–1363, 1986. doi: .
[32] D. Sempere-Torres, J.M. Porrà, and J.D. Creutin. A general formulation for raindrop size distribution. Journal of Applied Meteorology, 33(12):1494–1502, 1994. doi: 10.1175/1520-0450(1994)0331494:AGFFRS>2.0.CO;2.
[33] D. Sempere-Torres, J.M. Porrà, and J.D. Creutin. Experimental evidence of a general description for raindrop size distribution properties. Journal of Geophysical Research: Atmospheres, 103(D2):1785–1797, 1998. doi: 10.1029/97JD02065.
[34] K.V. Beard and H.R. Pruppacher. A determination of the terminal velocity and drag of small water drops by means of a wind tunnel. Journal of the Atmospheric Sciences, 26(5):1066–1072, 1969. doi: 10.1175/1520-0469(1969)0261066:ADOTTV>2.0.CO;2.
[35] G. Montero-Martínez, A.B. Kostinski, R.A. Shaw, and F. García-García. Do all raindrops fall at terminal speed? Geophysical Research Letters, 36(11), 2009. L11818, doi: 10.1029/2008GL037111.
[36] M.A. Nearing, J.M. Bradford, and R.D. Holtz. Measurement of force vs. time relations for waterdrop impact. Soil Science Society of America Journal, 50(6):1532–1536, 1986. doi: 10.2136/sssaj1986.03615995005000060030x.
Przejdź do artykułu

Autorzy i Afiliacje

Romeo di Leo
1
Massimo Viscardi
1
Francesco Paolo Tuccinardi
2
Michele Visone
3

  1. Department of Industrial Engineering – Aerospace section, University of Naples “Federico II”, Italy
  2. Promete S.r.l., Naples, Italy
  3. Blue Design S.r.l., Naples, Italy

Instrukcja dla autorów

About the Journal
Archive of Mechanical Engineering is an international journal publishing works of wide significance, originality and relevance in most branches of mechanical engineering. The journal is peer-reviewed and is published both in electronic and printed form. Archive of Mechanical Engineering publishes original papers which have not been previously published in other journal, and are not being prepared for publication elsewhere. The publisher will not be held legally responsible should there be any claims for compensation. The journal accepts papers in English.

Archive of Mechanical Engineering is an Open Access journal. The journal does not have article processing charges (APCs) nor article submission charges.

Original high quality papers on the following topics are preferred:

  • Mechanics of Solids and Structures,
  • Fluid Dynamics,
  • Thermodynamics, Heat Transfer and Combustion,
  • Machine Design,
  • Computational Methods in Mechanical Engineering,
  • Robotics, Automation and Control,
  • Mechatronics and Micro-mechanical Systems,
  • Aeronautics and Aerospace Engineering,
  • Heat and Power Engineering.

All submissions to the AME should be made electronically via Editorial System - an online submission and peer review system at: https://www.editorialsystem.com/ame

More detailed instructions for Authors can be found there.

Recenzenci


The Editorial Board of the Archive of Mechanical Engineering (AME) sincerely expresses gratitude to the following individuals who devoted their time to review papers submitted to the journal. Particularly, we express our gratitude to those who reviewed papers several times.

List of reviewers in 2023

Sara I. ABDELSALAM – University of California Riverside, United States
M. ARUNA – Liwa College of Technology, United Arab Emirates
Krzysztof BADYDA – Warsaw University of Technology, Poland
Nathalie BÄSCHLIN – Kunstmuseum Bern, Germany
Joanna BIJAK – Silesian University of Technology, Gliwice, Poland
Tomas BODNAR – The Czech Academy of Sciences, Prague, Czech Republic
Dariusz BUTRYMOWICZ – Białystok University of Technology, Poland
Suleyman CAGAN – Mechanical Engineering, Mersin University, Turkey
Claudia CASAPULLA – University of Naples Federico II, Italy
Peng CHEN – Northwestern Polytechnical University, Xi’an, China
Yao CHENG – Southwest Jiaotong University, Chengdu, China
Jan de JONG – University of Twente, Netherlands
Mariusz DEJA – Gdańsk University of Technology, Poland
Jerzy EJSMONT – Gdańsk University of Technology, Poland
İsmail ESEN – Karabuk University, Turkey
Pedro Javier GAMEZ-MONTERO – Universitat Politecnica de Catalunya, Spain
Aman GARG – National Institute of Technology, Kurukshetra, India
Michał HAĆ – Warsaw University of Technology, Poland
Satoshi ISHIKAWA – Kyushu University, Japan
Jacek JACKIEWICZ – Kazimierz Wielki University, Bydgoszcz, Poland
Krzysztof JAMROZIAK – Wrocław University of Technology, Poland
Hong-Lae JANG – Changwon National University, Korea (South)
Łukasz JANKOWSKI – Institute of Fluid-Flow Machinery, PAS, Gdansk, Poland
Albizuri JOSEBA – University of the Basque Country, Spain
Łukasz KAPUSTA – Warsaw University of Technology, Poland
Dariusz KARDAŚ – Institute of Fluid-Flow Machinery, PAS, Gdansk, Poland
Panagiotis KARMIRIS-OBRATAŃSKI – AGH University of Science and Technology, Cracow, Poland
Sivakumar KARTHIKEYAN – SRM Nagar
Tarek KHELFA – Hunan University of Humanities Science and Technology, China
Sven-Joachim KIMMERLE – Universität der Bundeswehr München, Germany
Thomas KLETSCHKOWSKI – HAW Hamburg, Germany
Piotr KLONOWICZ – Institute of Fluid-Flow Machinery, PAS, Gdansk, Poland
Vladis KOSSE – Queensland University of Technology, Australia
Mariusz KOSTRZEWSKI – Warsaw University of Technology, Poland
Maria KOTELKO – Lodz University of Technology, Poland
Michał KOWALIK – Warsaw University of Technology, Poland
Zbigniew KRZEMIANOWSKI – Institute of Fluid-Flow Machinery, Gdańsk, Poland
Slawomir KUBACKI – Warsaw University of Technology, Poland
Mieczysław KUCZMA – Poznan University of Technology, Poland
Waldemar KUCZYŃSKI – The Koszalin University of Technology, Poland
Rafał KUDELSKI – AGH University of Science and Technology, Cracow, Poland
Rajesh KUMAR – Sant Longowal Institute of Engineering and Technology, India
Mustafa KUNTOĞLU – Selcuk University, Turkey
Anna LEE – Pohang University of Science and Technology, South Korea, Korea (South)
Guolong LI – Chongqing University, China
Luxian LI – Xi'an Jiaotong University, China
Yingchao LI – Ludong University, Yantai, China
Xiaochuan LIN – Nanjing Tech University, China
Zhihong LIN – HuaQiao University, China
Yakun LIU – Massachusetts Institute of Technology, United States
Jinjun LU – Northwest University, Xiʼan, China
Paweł MACIĄG – Warsaw University of Technology, Poland
Paweł MALCZYK – Warsaw University of Technology, Poland
Emil MANOACH – Bulgarian Academy of Sciences, Sofia, Bulgaria
Mihaela MARIN – “Dunărea de Jos” University of Galati, Romania
Miloš MATEJIĆ – University of Kragujevac, Serbia
Krzysztof MIANOWSKI – Warsaw University of Technology, Poland
Tran MINH TU – Hanoi University of Civil Engineering, Viet Nam
Farhad Sadegh MOGHANLOU – University of Mohaghegh Ardabili, Ardabil, Iran
Mohsen MOTAMEDI – University of Isfahan, Iran
Adis MUMINOVIC – University of Sarajevo, Bosnia and Herzegovina
Mohamed NASR – National Research Centre, Giza, Egypt
Huu-That NGUYEN – Nha Trang University, Viet Nam
Tan-Luy NGUYEN – Ho Chi Minh City University of Technology, Viet Nam
Viorel PALEU – Gheorghe Asachi Technical University of Iasi, Romania
Nicolae PANC – Technical University of Cluj-Napoca, Romania
Marcin PĘKAL – Warsaw University of Technology, Poland
Van Vinh PHAM – Le Quy Don Technical University, Hanoi, Viet Nam
Vaclav PISTEK – Brno University of Technology, Czech Republic
Paweł PYRZANOWSKI – Warsaw University of Technology, Poland
Lei QIN – Beijing Information Science & Technology University, China
Milan RACKOV – University of Novi Sad, Serbia
Yuriy ROMASEVYCH – National University of Life and Environmental Sciences of Ukraine, Kiev, Ukraine
Artur RUSOWICZ – Warsaw University of Technology, Poland
Andrzej SACHAJDAK – Silesian University of Technology, Gliwice, Poland
Mirosław SEREDYŃSKI – Warsaw University of Technology, Poland
Maciej SUŁOWICZ – Cracow University of Technology, Poland
Biswajit SWAIN – National Institute of Technology, Rourkela, India
Tadeusz SZYMCZAK – Motor Transport Institute, Warsaw, Poland
Reza TAHERDANGKOO – Institute of Geotechnics, Freiberg, Germany
Rulong TAN – Chongqing University of Technology, China
Daniel TOBOŁA – Łukasiewicz Research Network - Cracow Institute of Technology, Poland
Milan TRIFUNOVIĆ – University of Niš, Serbia
Duong VU – Duy Tan University, Viet Nam
Shaoke WAN – Xi’an Jiaotong University, China
Dong WEI – Northwest A&F University, Yangling , China
Marek WOJTYRA – Warsaw University of Technology, Poland
Mateusz WRZOCHAL – Kielce University of Technology, Poland
Hugo YAÑEZ-BADILLO – TecNM: Tecnológico de Estudios Superiores de Tianguistenco, Mexico
Guichao YANG – Nanjing Tech University, China
Xiao YANG – Chongqing Technology and Business University, China
Yusuf Furkan YAPAN – Yildiz Technical University, Turkey
Luhe ZHANG – Chongqing University, China
Xiuli ZHANG – Shandong University of Technology, Zibo, China

List of reviewers in 2022
Isam Tareq ABDULLAH – Middle Technical University, Baghdad, Iraq
Ahmed AKBAR – University of Technology, Iraq
Nandalur AMER AHAMMAD – University of Tabuk, Saudi Arabia
Ali ARSHAD – Riga Technical University, Latvia
Ihsan A. BAQER – University of Technology, Iraq
Thomas BAR – Daimler AG, Stuttgart, Germany
Huang BIN – Zhejiang University, Zhoushan, China
Zbigniew BULIŃSKI – Silesian University of Technology, Poland
Onur ÇAVUSOGLU – Gazi University, Turkey
Ali J CHAMKHA – Duy Tan University, Da Nang , Vietnam
Dexiong CHEN – Putian University, China
Xiaoquan CHENG – Beihang University, Beijing, China
Piotr CYKLIS – Cracow University of Technology, Poland
Agnieszka DĄBSKA – Warsaw University of Technology, Poland
Raphael DEIMEL – Berlin University of Technology, Germany
Zhe DING – Wuhan University of Science and Technology, China
Anselmo DINIZ – University of Campinas, São Paulo, Brazil
Paweł FLASZYŃSKI – Institute of Fluid-Flow Machinery, Gdańsk, Poland
Jerzy FLOYRAN – University of Western Ontario, London, Canada
Xiuli FU – University of Jinan, China
Piotr FURMAŃSKI – Warsaw University of Technology, Poland
Artur GANCZARSKI – Cracow University of Technology, Poland
Ahmad Reza GHASEMI– University of Kashan, Iran
P.M. GOPAL – Anna University, Regional Campus Coimbatore, India
Michał GUMNIAK – Poznan University of Technology, Poland
Bali GUPTA – Jaypee University of Engineering and Technology, India
Dmitriy GVOZDYAKOV – Tomsk Polytechnic University, Russia
Jianyou HAN – University of Science and Technology, Beijing, China
Tomasz HANISZEWSKI – Silesian University of Technology, Poland
Juipin HUNG – National Chin-Yi University of Technology, Taichung, Taiwan
T. JAAGADEESHA – National Institute of Technology, Calicut, India
Jacek JACKIEWICZ – Kazimierz Wielki University, Bydgoszcz, Poland
JC JI – University of Technology, Sydney, Australia
Feng JIAO – Henan Polytechnic University, Jiaozuo, China
Daria JÓŹWIAK-NIEDŹWIEDZKA – Institute of Fundamental Technological Research, Warsaw, Poland
Rongjie KANG – Tianjin University, China
Dariusz KARDAŚ – Institute of Fluid-Flow Machinery, Gdansk, Poland
Leif KARI – KTH Royal Institute of Technology, Sweden
Daria KHANUKAEVA – Gubkin Russian State University of Oil and Gas, Russia
Sven-Joachim KIMMERLE – Universität der Bundeswehr München, Germany
Yeong-Jin KING – Universiti Tunku Abdul Rahman, Malaysia
Kaushal KISHORE – Tata Steel Limited, Jamshedpur, India
Nataliya KIZILOVA – Warsaw University of Technology, Poland
Adam KLIMANEK – Silesian University of Technology, Poland
Vladis KOSSE – Queensland University of Technology, Australia
Maria KOTEŁKO – Lodz University of Technology, Poland
Roman KRÓL – Kazimierz Pulaski University of Technology and Humanities in Radom, Poland
Krzysztof KUBRYŃSKI – Airforce Institute of Technology, Warsaw, Poland
Mieczysław KUCZMA – Poznan University of Technology, Poland
Paweł KWIATOŃ – Czestochowa University of Technology, Poland
Lihui Lang – Beihang University, China
Rafał LASKOWSKI – Warsaw University of Technology, Poland
Guolong Li – Chongqing University, China
Leo Gu LI – Guangzhou University, China
Pengnan LI – Hunan University of Science and Technology, China
Nan LIANG – University of Toronto, Mississauga, Canada
Michał LIBERA – Poznan University of Technology, Poland
Wen-Yi LIN – Hungkuo Delin University of Technology, Taiwan
Wojciech LIPINSKI – Austrialian National University, Canberra, Australia
Linas LITVINAS – Vilnius University, Lithuania
Paweł MACIĄG – Warsaw University of Technology, Poland
Krishna Prasad MADASU – National Institute of Technology Raipur, Chhattisgarh, India
Trent MAKI – Amino North America Corporation, Canada
Marco MANCINI – Institut für Energieverfahrenstechnik und Brennstofftechnik, Germany
Piotr MAREK – Warsaw University of Technology, Poland
Miloš MATEJIĆ – University of Kragujevac, Serbia
Phani Kumar MEDURI – VIT-AP University, Amaravati, India
Fei MENG – University of Shanghai for Science and Technology, China
Saleh MOBAYEN – University of Zanjan, Iran
Vedran MRZLJAK – Rijeka University, Croatia
Adis MUMINOVIC – University of Sarajevo, Bosnia and Herzegovina
Mohamed Fawzy NASR – National Research Centre, Giza, Egypt
Paweł OCŁOŃ – Cracow University of Technology, Poland
Yusuf Aytaç ONUR – Zonguldak Bulent Ecevit University, Turkey
Grzegorz ORZECHOWSKI – LUT University, Lappeenranta, Finland
Halil ÖZER – Yıldız Technical University, Turkey
Muthuswamy PADMAKUMAR – Technology Centre Kennametal India Ltd., Bangalore, India
Viorel PALEU – Gheorghe Asachi Technical University of Iasi, Romania
Andrzej PANAS – Warsaw Military Academy, Poland
Carmine Maria PAPPALARDO – University of Salerno, Italy
Paweł PARULSKI – Poznan University of Technology, Poland
Antonio PICCININNI – Politecnico di Bari, Italy
Janusz PIECHNA – Warsaw University of Technology, Poland
Vaclav PISTEK – Brno University of Technology, Czech Republic
Grzegorz PRZYBYŁA – Silesian University of Technology, Poland
Paweł PYRZANOWSKI – Warsaw University of Technology, Poland
K.P. RAJURKARB – University of Nebraska-Lincoln, United States
Michał REJDAK – Institute of Chemical Processing of Coal, Zabrze, Poland
Krzysztof ROGOWSKI – Warsaw University of Technology, Poland
Juan RUBIO – University of Minas Gerais, Belo Horizonte, Brazil
Artur RUSOWICZ – Warsaw University of Technology, Poland
Wagner Figueiredo SACCO – Universidade Federal Fluminense, Petropolis, Brazil
Andrzej SACHAJDAK – Silesian University of Technology, Poland
Bikash SARKAR – NIT Meghalaya, Shillong, India
Bozidar SARLER – University of Lubljana, Slovenia
Veerendra SINGH – TATA STEEL, India
Wieńczysław STALEWSKI – Institute of Aviation, Warsaw, Poland
Cyprian SUCHOCKI – Institute of Fundamental Technological Research, Warsaw, Poland
Maciej SUŁOWICZ – Cracov University of Technology, Poland
Wojciech SUMELKA – Poznan University of Technology, Poland
Tomasz SZOLC – Institute of Fundamental Technological Research, Warsaw, Poland
Oskar SZULC – Institute of Fluid-Flow Machinery, Gdansk, Poland
Rafał ŚWIERCZ – Warsaw University of Technology, Poland
Raquel TABOADA VAZQUEZ – University of Coruña, Spain
Halit TURKMEN – Istanbul Technical University, Turkey
Daniel UGURU-OKORIE – Federal University, Oye Ekiti, Nigeria
Alper UYSAL – Yildiz Technical University, Turkey
Yeqin WANG – Syndem LLC, United States
Xiaoqiong WEN – Dalian University of Technology, China
Szymon WOJCIECHOWSKI – Poznan University of Technology, Poland
Marek WOJTYRA – Warsaw University of Technology, Poland
Guenter WOZNIAK – Technische Universität Chemnitz, Germany
Guanlun WU – Shanghai Jiao Tong University, China
Xiangyu WU – University of California at Berkeley, United States
Guang XIA – Hefei University of Technology, China
Jiawei XIANG – Wenzhou University, China
Jinyang XU – Shanghai Jiao Tong University,China
Jianwei YANG – Beijing University of Civil Engineering and Architecture, China
Xiao YANG – Chongqing Technology and Business University, China
Oguzhan YILMAZ – Gazi University, Turkey
Aznifa Mahyam ZAHARUDIN – Universiti Teknologi MARA, Shah Alam, Malaysia
Zdzislaw ZATORSKI – Polish Naval Academy, Gdynia, Poland
S.H. ZHANG – Institute of Metal Research, Chinese Academy of Sciences, China
Yu ZHANG – Shenyang Jianzhu University, China
Shun-Peng ZHU – University of Electronic Science and Technology of China, Chengdu, China
Yongsheng ZHU – Xi’an Jiaotong University, China

List of reviewers of volume 68 (2021)
Ahmad ABDALLA – Huaiyin Institute of Technology, China
Sara ABDELSALAM – University of California, Riverside, United States
Muhammad Ilman Hakimi Chua ABDULLAH – Universiti Teknikal Malaysia Melaka, Malaysia
Hafiz Malik Naqash AFZAL – University of New South Wales, Sydney, Australia
Reza ANSARI – University of Guilan, Rasht, Iran
Jeewan C. ATWAL – Indian Institute of Technology Delhi, New Delhi, India
Hadi BABAEI – Islamic Azad University, Tehran, Iran
Sakthi BALAN – K. Ramakrishnan college of Engineering, Trichy, India
Leszek BARANOWSKI – Military University of Technology, Warsaw, Poland
Elias BRASSITOS – Lebanese American University, Byblos, Lebanon
Tadeusz BURCZYŃSKI – Institute of Fundamental Technological Research, Warsaw, Poland
Nguyen Duy CHINH – Hung Yen University of Technology and Education, Hung Yen, Vietnam
Dorota CHWIEDUK – Warsaw University of Technology, Poland
Adam CISZKIEWICZ – Cracow University of Technology, Poland
Meera CS – University of Petroleum and Energy Studies, Duhradun, India
Piotr CYKLIS – Cracow University of Technology, Poland
Abanti DATTA – Indian Institute of Engineering Science and Technology, Shibpur, India
Piotr DEUSZKIEWICZ – Warsaw University of Technology, Poland
Dinesh DHANDE – AISSMS College of Engineering, Pune, India
Sufen DONG – Dalian University of Technology, China
N. Godwin Raja EBENEZER – Loyola-ICAM College of Engineering and Technology, Chennai, India
Halina EGNER – Cracow University of Technology, Poland
Fehim FINDIK – Sakarya University of Applied Sciences, Turkey
Artur GANCZARSKI – Cracow University of Technology, Poland
Peng GAO – Northeastern University, Shenyang, China
Rafał GOŁĘBSKI – Czestochowa University of Technology, Poland
Andrzej GRZEBIELEC – Warsaw University of Technology, Poland
Ngoc San HA – Curtin University, Perth, Australia
Mehmet HASKUL – University of Sirnak, Turkey
Michal HATALA – Technical University of Košice, Slovak Republic
Dewey HODGES – Georgia Institute of Technology, Atlanta, United States
Hamed HONARI – Johns Hopkins University, Baltimore, United States
Olga IWASINSKA – Warsaw University of Technology, Poland
Emmanuelle JACQUET – University of Franche-Comté, Besançon, France
Maciej JAWORSKI – Warsaw University of Technology, Poland
Xiaoling JIN – Zhejiang University, Hangzhou, China
Halil Burak KAYBAL – Amasya University, Turkey
Vladis KOSSE – Queensland University of Technology, Brisbane, Australia
Krzysztof KUBRYŃSKI – Air Force Institute of Technology, Warsaw, Poland
Waldemar KUCZYŃSKI – Koszalin University of Technology, Poland
Igor KURYTNIK – State Higher School in Oswiecim, Poland
Daniel LESNIC – University of Leeds, United Kingdom
Witold LEWANDOWSKI – Gdańsk University of Technology, Poland
Guolu LI – Hebei University of Technology, Tianjin, China
Jun LI – Xi’an Jiaotong University, China
Baiquan LIN – China University of Mining and Technology, Xuzhou, China
Dawei LIU – Yanshan University, Qinhuangdao, China
Luis Norberto LÓPEZ DE LACALLE – University of the Basque Country, Bilbao, Spain
Ming LUO – Northwestern Polytechnical University, Xi’an, China
Xin MA – Shandong University, Jinan, China
Najmuldeen Yousif MAHMOOD – University of Technology, Baghdad, Iraq
Arun Kumar MAJUMDER – Indian Institute of Technology, Kharagpur, India
Paweł MALCZYK – Warsaw University of Technology, Poland
Miloš MATEJIĆ – University of Kragujevac, Serbia
Norkhairunnisa MAZLAN – Universiti Putra Malaysia, Serdang, Malaysia
Dariusz MAZURKIEWICZ – Lublin University of Technology, Poland
Florin MINGIREANU – Romanian Space Agency, Bucharest, Romania
Vladimir MITYUSHEV – Pedagogical University of Cracow, Poland
Adis MUMINOVIC – University of Sarajevo, Bosnia and Herzegovina
Baraka Olivier MUSHAGE – Université Libre des Pays des Grands Lacs, Goma, Congo (DRC)
Tomasz MUSZYŃSKI – Gdansk University of Technology, Poland
Mohamed NASR – National Research Centre, Giza, Egypt
Driss NEHARI – University of Ain Temouchent, Algeria
Oleksii NOSKO – Bialystok University of Technology, Poland
Grzegorz NOWAK – Silesian University of Technology, Gliwice, Poland
Iwona NOWAK – Silesian University of Technology, Gliwice, Poland
Samy ORABY – Pharos University in Alexandria, Egypt
Marcin PĘKAL – Warsaw University of Technology, Poland
Bo PENG – University of Huddersfield, United Kingdom
Janusz PIECHNA – Warsaw University of Technology, Poland
Maciej PIKULIŃSKI – Warsaw University of Technology, Poland
T.V.V.L.N. RAO – The LNM Institute of Information Technology, Jaipur, India
Andrzej RUSIN – Silesian University of Technology, Gliwice, Poland
Artur RUSOWICZ – Warsaw University of Technology, Poland
Benjamin SCHLEICH – Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany
Jerzy SĘK – Lodz University of Technology, Poland
Reza SERAJIAN – University of California, Merced, USA
Artem SHAKLEIN – Udmurt Federal Research Center, Izhevsk, Russia
G.L. SHI – Guangxi University of Science and Technology, Liuzhou, China
Muhammad Faheem SIDDIQUI – Vrije University, Brussels, Belgium
Jarosław SMOCZEK – AGH University of Science and Technology, Cracow, Poland
Josip STJEPANDIC – PROSTEP AG, Darmstadt, Germany
Pavel A. STRIZHAK – Tomsk Polytechnic University, Russia
Vadym STUPNYTSKYY – Lviv Polytechnic National University, Ukraine
Miklós SZAKÁLL – Johannes Gutenberg-Universität Mainz, Germany
Agnieszka TOMASZEWSKA – Gdansk University of Technology, Poland
Artur TYLISZCZAK – Czestochowa University of Technology, Poland
Aneta USTRZYCKA – Institute of Fundamental Technological Research, Warsaw, Poland
Alper UYSAL – Yildiz Technical University, Turkey
Gabriel WĘCEL – Silesian University of Technology, Gliwice, Poland
Marek WĘGLOWSKI – Welding Institute, Gliwice, Poland
Frank WILL – Technische Universität Dresden, Germany
Michał WODTKE – Gdańsk University of Technology, Poland
Marek WOJTYRA – Warsaw University of Technology, Poland
Włodzimierz WRÓBLEWSKI – Silesian University of Technology, Gliwice, Poland
Hongtao WU – Nanjing University of Aeronautics and Astronautics, China
Jinyang XU – Shanghai Jiao Tong University, China
Zhiwu XU – Harbin Institute of Technology, China
Zbigniew ZAPAŁOWICZ – West Pomeranian University of Technology, Szczecin, Poland
Zdzislaw ZATORSKI – Polish Naval Academy, Gdynia, Poland
Wanming ZHAI – Southwest Jiaotong University, Chengdu, China
Xin ZHANG – Wenzhou University of Technology, China
Su ZHAO – Ningbo Institute of Materials Technology and Engineering, China



Ta strona wykorzystuje pliki 'cookies'. Więcej informacji