Applied sciences

Archives of Environmental Protection


Archives of Environmental Protection | 2010 | vol. 36 | No 2 |

Download PDF Download RIS Download Bibtex


The emission rate of fibers released lrorn the new/fresh and used/worn ceramic fiber material. glass wool and man-made mineral fiber material due lo mechanical impact was determined experimentally. The emission rate has been defined as a number or fibers emitted per unit mass and unit impaction energy. The averaged emission rate of short fibers (LS 5 run) for all studied fresh non-asbestos fiber materials ranged lrom 2.2 to 20 fibers/(g·.l), while the emission or long fibers (I,> 5 urn) was between 2.2 and I 00 fibers/(g·J). The susceptibility or worn fiber-containing materials 10 emitting fibrous particles due 10 mechanical impaction was significantly diverse. Emission from glass wool unchanged with the exploitation, while the emission rate of the mineral fiber material increased by a factor of I O·' compared 10 new material. The dominating population or emitted fibers from studied materials ranged trorn 2 10 around 8 pm in length.
Go to article

Authors and Affiliations

Józef S. Pastuszka
Download PDF Download RIS Download Bibtex


The aims of the study was to establish whether differences exist between periphytic ciliate communities on different substrates; to determine whether colonization time would yield an abundance and taxonomic composition of ciliates; to assess the effect of physical and chemical factors on the distribution of ciliates in a shallow hypertrophic lake. Generally the species richness as well as the abundance ofpcriphytic ciliates arc determined mostly by the habitats and chemical properties of the waters (especially the content of total organic carbon and nitrate nitrogen), and, to a lesser extent, by the type of the colonized substrate. Moreover, exposition time of the substrates affected both an increase in the richness of periphytic ciliates and the changes in their trophic structure. At the beginning of the experiment the substrates were intensively colonized by typically bacterivorous species, yet prolonged exposition time resulted in an increasing proportion of omnivorous species.
Go to article

Authors and Affiliations

Tomasz Mieczan
Agnieszka Puk
Download PDF Download RIS Download Bibtex


The paper presents qualitative, Bayesian model used 10 determine some interdependencies between sorption features for mineral soils in southern Poland. Sorption properties are very important, crucial for measure or fertility, nutrient retention capacity, and the capacity to protect groundwater from coutaminution. Cation exchange capacity (CFC) is a commonly applied indicator otihc soils conditions or vulncrahilitv. Base saturation (BS) is an important clement of hazard degree assessment in soils lying within reach of impact acidifying agents. The considered soils represented different valuation classes and differed in their typology. The Bayesian model is used lor interdependences assessment.
Go to article

Authors and Affiliations

Stanisław Gruszczyński
Download PDF Download RIS Download Bibtex


The paper presents the results of an experiment with sugar-industry waste (molasses) as an organic carbon source for denitrification. The investigations concern the influence of untreated molasses and molasses after pretreatment (hydrolyzed molasses) and variable COD/N ratio (6.0: 5.0: 4.0) on denitrification efficiency and kinetics. Moreover, sludge production, in dependence on tested carbon source, was estimated. Al COD/N ratio 6 and 5, regardless or applied organic carbon source (untreated molasses. hydrolyzed molasses), the denitrification efficiency was over 98%,. However. from kinetic analysis it results that a kind or carbon source and COD/N ratio have an effect on denitrification rate. The highest nitrate removal rate - 9.5 mg N,0/(dm-1-h) was obtained al COD/N = 6 in the reactor with hydrolyzed molasses as a carbon source and the lowest - 5.14 mg N,0J(dm1-h) in reactor with untreated molasses at COD/N = 5.0. The lowering or COD/N ratio to 4 caused decrease otthe process efficiency to 27.6% (untreated molasses) and 44.3% (hydrolyzed molasses). Hydrolyzed molasses as a carbon source caused higher production of activated sludge. In reactors with untreated molasses Y equals 0.40 mg VSS/rng COD at COD/N ratio 6 and 0.31 111g VSS/111g COD at COD/N ratio 5. In reactors with molasses alter hydrolysis Y, were 1.35-lolcl and 1.5-lold higher, respectively. Since, the molasses hydrolysis results in rising costs of wastewater treatment and cause higher sludge production, untreated molasses seems to be a more suitable carbon source for dcniuification.
Go to article

Authors and Affiliations

Dorota Kulikowska
Karolina Dudek
Download PDF Download RIS Download Bibtex


The objective of this work was investigation of the growth dynamics of proteolytic bacteria and the enzymatic activity in soil for the cultivation of maize (Zea mays L.), as well as the maize yield under application of some selected organic fertilizers. Intensity and the direction of the developed changes in the soil depended on the type of applied organic fertilizer, the size of its dose introduced into the soil and on the developmental phase of the grown plant (maize). On the basis of obtained results it was found that all tested organic substances stimulated the activity of proteases. Yields ofmaize as raw material for silages obtained from soil fertilized with sewage sludge were similar to those obtained after the application of pig slurry and they exceeded maize yields harvested from other ferti I ization objects.
Go to article

Authors and Affiliations

Alicja Niewiadomska
Hanna Sulewska
Agnieszka Wolna-Maruwka
Justyna Klama
Download PDF Download RIS Download Bibtex


The aim of the study was to estimate the effect otthe composting process in the container technology Kneer on E. coli inactivation. The bacteria placed in the special carriers were introduced into the composted material. The elimination rate of E. coli differed depending on both the carriers· location in the biomass and the thermal conditions. The most effective hygienization, nr the material was noticed in summer - after 48 h in the middle layer, 6 days in the top layer and 10 days in the bottom layer. In spring and autumn, the bacteria survived the longest in the bottom layer - 85 and 45 days, respectively. Apart from the high temperature, the research points out the action of other factors such as competition, antagonism and antibiosis.
Go to article

Authors and Affiliations

Beata Szala
Zbigniew Paluszak
Download PDF Download RIS Download Bibtex


Polycyclic aromatic hydrocarbons (PAI-ls) are persistent organic pollutants, ubiquitous in the whole environment. They are relatively well known and are still of interest due to their well documented carcinogenic and mutagenie properties. In ambient air of urban regions they mostly occur as adsorbed to particles of suspended dust. The richest in these compounds and therefore most hazardous to humans, fraction of dust is the fraction of the finest particles. The paper presents results of investigations of dust sampled with use of an impactor Dekati PM10 in Zabrze, a site typical of Upper Silesian conditions. While sampling, the impactor segregates sampled particles into four fractions by their aerodynamic diameters. Sixteen PAHs were determined in each fraction chromatographically. PAH content in the fraction of the finest particles, i.e. in PM1, was of particular interest.
Go to article

Authors and Affiliations

Krzysztof Klejnowski
Barbara Kozielska
Andrzej Krasa
Wioletta Rogula-Kozłowska
Download PDF Download RIS Download Bibtex


Phenol degradation efficiency or Pscndontonas putida PCM2 l 53 free cel ls was experimentally studied. Bacterial cells were acclimatized to phenol what relied on gradually increasing the phenol concentration in the medium. The highest phenol degradation rate was calculated as approximately 15.2 mgdmŁh'. Investigated strain degraded the phenol at the concentration or 400 111g-d111·-' in 24 h. The result or toxicity analysis showed that acclimatized cells orP putida PCM2 l 53 arc able to survive even al as high concentration or phenol as 3000'. The obtained result suggests that the analyzed strain can be used lor cflcciivc treating of high strength phenolic wastewater. Due to resistance of the strain to high phenol concentration it may be applied in biorcmcdiation of exceedingly contaminated sites, especially where dilution or pollutants cannot be implemented.
Go to article

Authors and Affiliations

Grzegorz Przybyłek
Sławomir Ciesielski
Download PDF Download RIS Download Bibtex


The article deals with the state of utilization and protection of the water· resources in the Mokaśnica river basin (MRB) within the larger Mostarsko Biało catchment area (MRB). The authors present data on the Mostarsko Blato basin, provided through the analyses of the results of earlier research projects dealing with surface and groundwater flows, particularly related to the research carried out in the MR fl. The previous water engineering works in the MRB have been analyzed for effects on the natural environment and the influence of such works on the regime of surface flow and groundwater aquifer geometry. In order to protect the area of the MRB from further devastation, the authors suggest some protective measures and due improvements. A special environmental protection study is necessary lor heller management otthe MRB waters and the natural environrncnt, including the analysis ofthe possibility of losing said water resources due to the implemented engineering interventions.
Go to article

Authors and Affiliations

Bozo Soldo
Josip Mesec
Mladen Zelenika

Instructions for authors

Archives of Environmental Protection
Instructions for Authors

Archives of Environmental Protection is a quarterly published jointly by the Institute of Environmental Engineering of the Polish Academy of Sciences and the Committee of Environmental Engineering of the Polish Academy of Sciences. Thanks to the cooperation with outstanding scientists from all over the world we are able to provide our readers with carefully selected, most interesting and most valuable texts, presenting the latest state of research in the field of engineering and environmental protection.

The Journal principally accepts for publication original research papers covering such topics as:
– Air quality, air pollution prevention and treatment;
– Wastewater treatment and utilization;
– Waste management;
– Hydrology and water quality, water treatment;
– Soil protection and remediation;
– Transformations and transport of organic/inorganic pollutants in the environment;
– Measurement techniques used in environmental engineering and monitoring;
– Other topics directly related to environmental engineering and environment protection.

The Journal accepts also authoritative and critical reviews of the current state of knowledge in the topic directly relating to the environment protection.

If unsure whether the article is within the scope of the Journal, please send an abstract via e-mail to:

Preparation of the manuscript
The following are the requirements for manuscripts submitted for publication:
• The manuscript (with illustrations, tables, abstract and references) should not exceed 20 pages. In case the manuscript exceeds the required number of pages, we suggest contacting the Editor.
• The manuscript should be written in good English.
• The manuscript ought to be submitted in doc or docx format in three files:
– text.doc – file containing the entire text, without title, keywords, authors names and affiliations, and without tables and figures;
– figures.doc – file containing illustrations with legends;
– tables.doc – file containing tables with legends;
• The text should be prepared in A4 format, 2.5 cm margins, 1.5 spaced, preferably using Time New Roman font, 12 point. Thetext should be divided into sections and subsections according to general rules of manuscript editing. The proposed place of tables and figures insertion should be marked in the text.
• Legends in the figures should be concise and legible, using a proper font size so as to maintain their legibility after decreasing the font size. Please avoid using descriptions in figures, these should be used in legends or in the text of the article. Figures should be placed without the box. Legends should be placed under the figure and also without box.
• Tables should always be divided into columns. When there are many results presented in the table it should also be divided into lines.
• References should be cited in the text of an article by providing the name and publication year in brackets, e.g. (Nowak 2019). When a cited paper has two authors, both surnames connected with the word “and” should be provided, e.g. (Nowak and Kowalski 2019). When a cited paper has more than two author, surname of its first author, abbreviation ‘et al.’ and publication year should be provided, e.g. (Kowalski et al. 2019). When there are more than two publications cited in one place they should be divided with a coma, e.g. (Kowalski et al. 2019, Nowak 2019, Nowak and Kowalski 2019). Internet sources should be cited like other texts – providing the name and publication year in brackets.
• The Authors should avoid extensive citations. The number of literature references must not exceed 30 including a maximum of 6 own papers. Only in review articles the number of literature references can exceed 30.
• References should be listed at the end of the article ordered alphabetically by surname of the first author. References should be made according to the following rules:

1. Journal:
Surnames and initials. (publication year). Title of the article, Journal Name, volume, number, pages, DOI.
For example:

Nowak, S.W., Smith, A.J. & Taylor, K.T. (2019). Title of the article, Archives of Environmental Protection, 10, 2, pp. 93–98. DOI: 10.24425/aep.2019.126330

If the article has been assigned DOI, it should be provided and linked with the website on which it is made available.

2. Book:
Surnames and initials. (publication year). Title, Publisher, Place and publishing year.
For example:

Kraszewski, J. & Kinecki, K. (2019). Title of book, Work & Studies, Zabrze 2019.

3. Edited book:

Surnames and initials of text authors. (publishing year). Title of cited chapter, in: Title of the book, Surnames and
initials of editor(s). (Ed.)/(Eds.). Publisher, Place, pages.
For example:

Reynor, J. & Taylor, K.T. (2019). Title of chapter, in: Title of the cited book, Kaźmierski, I. & Jasiński, C. (Eds.). Work & Studies, Zabrze, pp. 145–189.

4. Internet sources:
Surnames and initials or the name of the institution which published the text. (publication year). Title, (website address (accessed on)).
For example:

Kowalski, M. (2018). Title, ( (03.12.2018)).

5. Patents:

Orszulik, E. (2009). Palenisko fluidalne, Patent polski: nr PL20070383311 20070910 z 16 marca 2009.
Smith, I.M. (1988). U.S. Patent No. 123,445. Washington, D.C.: U.S. Patent and Trademark Office.

6. Materials published in language other than English:
Titles of cited materials should be translated into English. Information of the language the materials were published in should be provided at the end.
For example:

Nowak, S.W. & Taylor, K.T. (2019). Title of article, Journal Name, 10, 2, pp. 93–98. DOI: 10.24425/aep.2019.126330. (in Polish)

Not more than 30 references should be cited in the original research paper.

Submission of the manuscript
By submitting the manuscript Author(s) warrant(s) that the article has not been previously published and is not under consideration by another journal. Authors claim responsibility and liability for the submitted article.
The article is freely available and distributed under the terms of Creative Commons Attribution-ShareAlike 4.0 International Public License (CC BY SA 4.0,, which permits use, distribution and reproduction in any medium provided the article is properly cited, is not used for commercial purposes and no modification or adaptation are made.

© 2021. The Author(s). This is an open-access article distributed under the terms of the Creative Commons Attribution-ShareAlike 4.0 International Public License (CC BY SA 4.0,, which permits use, distribution, and reproduction in any medium, provided that the article is properly cited, the use is non-commercial, and no modifications or adaptations are made

The manuscripts should be submitted on-line using the Editorial System available at Authors are asked to propose at least 4 potential reviewers, including 2 from Poland, together with their e-mail addresses. The journal does not have article processing charges (APCs) nor article submission charges.

Review Process
All the submitted articles are assessed by the Editorial Board. If positively assessed by at least two editors, Editor in Chief, along with department editors selects two independent reviewers from recognized authorities in the discipline.
Review process usually lasts from 1 to 4 months.
Reviewers have access to PUBLONS platform which integrates into Bentus Editorial System and enables adding reviews to their personal profile.
After completion of the review process Authors are informed of the results and – if both reviews are positive – asked to correct the text according to reviewers’ comments. Next, the revised work is verified by the editorial staff for factual and editorial content.

Acceptance of the manuscript

The manuscript is accepted for publication on grounds of the opinions of independent reviewers and approval of Editorial Board. Authors are informed about the decision and also asked to pay processing charges and to send completed declaration of the transfer of copyright to the editorial office.

Proofreading and Author Correction
All articles published in the Archives of Environmental Protection go through professional proofreading process. If there are too many language errors that prevent understanding of the text, the article is sent back to Authors with a request to correct the indicated fragments or – in extreme cases – to re-translate the text.
After proofreading the manuscript is prepared for publishing. The final stage of the publishing process is Author correction. Authors receive a page proof copy of the article with a request to make final corrections.

Article publication charges
The publication fee of an article in the Journal is:
25 EUR/100 zł per page (black and white or in gray scale),
35 EUR/130 zł per page (color).

Payments in Polish zlotys
Bank BGK
Account no.: 20 1130 1091 0003 9111 7820 0001

Payments in Euros
Bank BGK
Account no.: 20 1130 1091 0003 9111 7820 0001
IBAN: PL 20 1130 1091 0003 9111 7820 0001

Authors are kindly requested to inform the editorial office of making payment for the publication, as well as to send all necessary data for issuing an invoice.

Additional info

Abstracting & Indexing

Archives of Environmental Protection is covered by the following services:

AGRICOLA (National Agricultural Library)



Baidu Scholar


CABI (over 50 subsections)

Chemical Abstracts Service (CAS) - CAplus

Chemical Abstracts Service (CAS) - SciFinder

CNKI Scholar (China National Knowledge Infrastructure)



DOAJ (Directory of Open Access Journals)

EBSCO (relevant databases)

EBSCO Discovery Service

Engineering Village

FSTA - Food Science & Technology Abstracts

Genamics JournalSeek



Google Scholar

Index Copernicus


Japan Science and Technology Agency (JST)


Journal Citation Reports/Science Edition


KESLI-NDSL (Korean National Discovery for Science Leaders)

Microsoft Academic

Naviga (Softweco)

Primo Central (ExLibris)

ProQuest (relevant databases)






Summon (Serials Solutions/ProQuest)


TEMA Technik und Management

Ulrich's Periodicals Directory/ulrichsweb

WanFang Data

Web of Science - Biological Abstracts

Web of Science - BIOSIS Previews

Web of Science - Science Citation Index Expanded

WorldCat (OCLC)

This page uses 'cookies'. Learn more