Nauki Techniczne

Archive of Mechanical Engineering

Zawartość

Archive of Mechanical Engineering | 2021 | vol. 68 | No 4

Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Vibrational stress relief (VSR) treatment as a method of stress relief is currently performed on different alloys and sizes as an appropriate alternative for thermal stress relief (TSR) method. Although many studies have been performed to extend the knowledge about this process, analytical studies in the field of VSR process seems to require wider efforts to introduce the concept more clearly and extensively. In this study, a theoretical model is proposed based on an analytical equation. The proposed equation was modified in terms of required variables including frequency, amplitude, and vibration duration to encompass more practical parameters compared to the previous models. Thus, essential VSR parameters including the number of cycles as a representative of treatment duration, strain rate as a representative of frequency, and the amplitude were embedded in the model to make it comprehensively practical. Experimental tests were also performed and residual stress distribution was measured by X-ray diffractometry (XRD) method for certain points to compare the experimental results with the theoretical output. An acceptable range of conformation was observed between theoretical and experimental results.
Przejdź do artykułu

Bibliografia

[1] R. Dawson. Residual stress relief by vibration. Ph.D. Thesis, University of Liverpool, UK, 1975.
[2] R.T. McGoldrick and H.E. Saunders. Experiments in stress-relieving castings and welded structures by vibration. Journal of the American Society of Naval Engineers, 55(4):589–609, 1943.
[3] P. Sędek and M.S. Węglowski. Application of mechanical vibration in the machine building technology. Key Engineering Materials, 504-506:1383–1388, 2012. doi: 10.4028/www.scientific.net/kem.504-506.1383.
[4] I.K. Lokshin. Vibration treatment and dimensional stabilization of castings. Russian Castings Production, 10:454–457, 1965.
[5] H. Moore. A study of residual stresses and size effect and a study of the effect of repeated stresses on residual stresses due to shot peening of two steels. Proceedings of the Society for Experimental Stress Analysis, 2(1):170–177, 1944.
[6] A. Jurcius, A.V Valiulis, O. Černašėjus, K.J. Kurzydlowski, A.Jaskiewicz, and M. Lech-Grega. Influence of vibratory stress relief on residual stresses in weldments and mechanical properties of structural steel joint. Journal of Vibroengineering, 12(1):133–141, 2010.
[7] K. Liao, Y-X. Wu, and J-K. Guo. Application of VSR technique in stress reduction of aluminum alloy thick plate and its limitation. Journal of Vibration and Shock, 31(14):70–73, 2012. (in Chinese).
[8] M.B. Khan and T. Iqbal. Vibratory stress relief in D-406 aerospace alloy. In: TMS Annual Meeting, pages 807–814, San Francisco, CA, USA, 2009.
[9] J-S. Wang, C-C. Hsieh, C-M. Lin, C-W. Kuo, and W. Wu. Texture evolution and residual stress relaxation in a cold-rolled Al-Mg-Si-Cu alloy using vibratory stress relief technique. Metallurgical and Materials Transactions A, 44(2):806–818, 2013. doi: 10.1007/s11661-012-1450-8.
[10] W. He, B.P. Gu, J.Y. Zheng, and R.J. Shen. Research on high-frequency vibratory stress relief of small Cr12MoV quenched specimens. Applied Mechanics and Materials, 157-158:1157–1161, 2012. doi: 10.4028/www.scientific.net/AMM.157-158.1157.
[11] J-S. Wang, C-W. Kuo, C-C. Hsieh, H-C. Liao, and W. Wu. The effects of waveform in residual stress relief by vibration technique. In: Trends in Welding Research 2012: Proceedings of the 9th International Conference, pages 427-431, Chicago, IL, USA, 4–8 June, 2012.
[12] C. Lin, S. Wu, S. Lü, P. An, and L. Wan. Effects of ultrasonic vibration and manganese on microstructure and mechanical properties of hypereutectic Al–Si alloys with 2% Fe. Intermetallics, 32:176-183, 2013. doi: 10.1016/j.intermet.2012.09.001.
[13] T. Jia, Z. Zhang, C. Tang, and Y. Zhang. Numerical simulation of stress-relief effects of protective layer extraction. Archives of Mining Sciences, 58(2):521–540, 2013. doi: 10.2478/amsc-2013-0035.
[14] Y. Yang. Understanding of vibration stress relief with computation modeling. Journal of Materials Engineering and Performance, 18(7):856–86, 2009. doi: 10.1007/s11665-008-9310-9.
[15] S. Kwofie. Plasticity model for simulation, description and evaluation of vibratory stress relief. Materials Science and Engineering: A, 516(1-2):154–161, 2009. doi: 10.1016/j.msea.2009.03.014.
[16] S. Aoki, T. Nishimura, T. Hiroi, and S. Hirai. Reduction method for residual stress of welded joint using harmonic vibrational load. Nuclear Engineering and Design, 237(2):206–212. 2007. doi: 10.1016/j.nucengdes.2006.06.004.
[17] D. Rao, D. Wang, L. Chen, and C. Ni. The effectiveness evaluation of 314L stainless steel vibratory stress relief by dynamic stress. International Journal of Fatigue, 29(1):192–196, 2007. doi: 10.1016/j.ijfatigue.2006.02.047.
[18] H. Wang and Z. Wang. The embedded VSR system design based on ARM and frequency spectrum analysis. In: 2008 IEEE Pacific-Asia Workshop on Computational Intelligence and Industrial Application, pages 488–492, Wuhan, China, 19-20 Dec., 2008. doi: 10.1109/PACIIA.2008.81.
[19] M.J. Vardanjani, M. Ghayour, and R.M. Homami. Analysis of the vibrational stress relief for reducing the residual stresses caused by machining. Experimental Techniques, 40(2):705–713, 2016. doi: 10.1007/s40799-016-0071-3.
[20] M.J. Vardanjani, A. Araee, J. Senkara, J. Jakubowski, and J. Godek. Metallurgical effects of shunting current on resistance spot-welded joints of AA2219 sheets. Journal of Materials Engineering and Performance, 25(8):3506–3517, 2016. doi: 10.1007/s11665-016-2168-3.
[21] M.J. Vardanjani, A. Araee, J. Senkara, M. Sohrabian, and R. Zarandooz. Influence of shunting current on the metallurgical and mechanical behaviour of resistance spot-welded joints in AA2219 joints. Strojniški vestnik – Journal of Mechanical Engineering, 62(11):625–635, 2016. doi: 10.5545/sv-jme.2016.3682.
[22] B. Kılıç and Ö. Özdemir. Vibration and stability analyses of functionally graded beams. Archive of Mechanical Engineering, 68(1):93–113, 2021. doi: 10.24425/ame.2021.137043.
[23] P. Vergeer. Vibration isolation of dimple plate heat exchangers. M.Sc. Thesis. North-West University, Potchefstroom Campus, North-West University, South Africa, 2013.
[24] S. Li, Y. Kang, G. Zhu, and S. Kuang. Effects of strain rates on mechanical properties and fracture mechanism of DP780 dual phase steel. Journal of Materials Engineering and Performance, 24(6):2426–2434, 2015. doi: 10.1007/s11665-015-1495-0.
[25] A. Grudz. Reducing welding stresses in plates by vibration. Automatic Welding USSR, 25(7):70–71, 1972.
[26] A.S.M.Y. Munsi, A.J. Waddell, and C.A. Walker. Modification of welding stresses by flexural vibration during welding. Science and Technology of Welding and Joining, 6(3):133–138, 2001. doi: 10.1179/136217101101538668.
Przejdź do artykułu

Autorzy i Afiliacje

Mehdi Jafari Vardanjani
1
Jacek Senkara
2
ORCID: ORCID

  1. Department of Mechanical Engineering, Technical and Vocational University (TVU), Tehran, Iran.
  2. Department of Welding Engineering,Warsaw University of Technology,Warsaw, Poland.
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The structural damages can lead to structural failure if they are not identified at early stages. Different methods for detecting and locating the damages in structures have been always appealing to designers in the field. Due to direct relation between the stiffness, natural frequency, and mode shapes in the structure, the modal parameters could be used for the purpose of detecting and locating the damages in structures. In the current study, a new damage indicator named “DLI” is proposed, using the mode shapes and their derivatives. A finite element model of a beam is used, and the numerical model is validated against experimental data. The proposed index is investigated for two beams with different support conditions and the results are compared with those of two well-known indices – MSEBI and CDF. To show the capability and accuracy of the proposed index, the damages with low severity at various locations of the structures containing the elements near the supports were investigated. The results under noisy conditions are investigated by considering 3% and 5% noise on modal data. The results show a high level of accuracy of the proposed index for identifying the location of the damaged elements in beams.
Przejdź do artykułu

Bibliografia

[1] M. Dilena, M.F. Dell’Oste, and A. Morassi. Detecting cracks in pipes filled with fluid from changes in natural frequencies. Mechanical Systems and Signal Processing, 25(8):3186–3197, 2011. doi: 10.1016/j.ymssp.2011.04.013.
[2] J.M. Dulieu-Barton, W.J. Staszewski, and K. Worden. Structural Damage Assessment Using Advanced Signal Processing Procedures: Proceedings of the International Conference on Damage Assessment of Structures (DAMAS '97). Sheffield, England, 30 June - 2 July, 1997, Sheffield Academic Press, 1997,
[3] W. Xu, M. Cao, W. Ostachowicz, M. Radzieński, and N. Xia. Two-dimensional curvature mode shape method based on wavelets and Teager energy for damage detection in plates. Journal of Sound and Vibration, 347:266–278, 2015. doi: 10.1016/j.jsv.2015.02.038.
[4] D.V. Jauregui and C.R. Farrar. Damage identification algorithms applied to numerical modal data from a bridge. In: 14th International Modal Analysis Conference, Dearborn, USA, 12-15 February, 1996.
[5] N. Navabian, M. Bozorgnasab, R. Taghipour, and O. Yazdanpanah. Damage identification in plate-like structure using mode shape derivatives. Archive of Applied Mechanics, 86:819–830, 2016. doi: 10.1007/s00419-015-1064-x.
[6] N. Navabian, R. Taghipour, M. Bozorgnasab, and J. Ghasemi. Damage evaluation in plates using modal data and firefly optimisation algorithm. International Journal of Structural Engineering, 9(1):50-69, 2018. doi: 10.1504/IJSTRUCTE.2018.090750.
[7] M.M. Fayyadh, H.A. Razak, and Z. Ismail. Combined modal parameters-based index for damage identification in a beamlike structure: theoretical development and verification. Archives of Civil and Mechanical Engineering, 11(3):587–609, 2011. doi: 0.1016/S1644-9665(12)60103-4.
[8] A. Tomaszewska and M. Szafrański. Study on applicability of two modal identification techniques in irrelevant cases. Archives of Civil and Mechanical Engineering, 20:13, 2020. doi: 10.1007/s43452-020-0014-8.
[9] H. Hasni, A.H. Alavi, P. Jiao, and N. Lajnef. Detection of fatigue cracking in steel bridge girders: A support vector machine approach. Archives of Civil and Mechanical Engineering, 17(3):609–622, 2017. doi: 10.1016/j.acme.2016.11.005.
[10] J. Ciambella and F. Vestroni. The use of modal curvatures for damage localization in beam-type structures. Journal of Sound and Vibration, 340:126–137, 2015. doi: 10.1016/j.jsv.2014.11.037.
[11] D. Donskoy and D. Liu. Vibro-acoustic modulation baseline-free non-destructive testing. Journal of Sound and Vibration, 492:115808, 2021. doi: 10.1016/j.jsv.2020.115808.
[12] C.R. Farrar, S.W. Doebling, and D.A. Nix. Vibration–based structural damage identification. Philosophical Transactions of the Royal Society A. Mathematical, Physical and Engineering Sciences, 359(1778):131–149, 2001. doi: 10.1098/rsta.2000.0717.
[13] G.M. Owolabi, A.S.J. Swamidas, and R. Seshadri. Crack detection in beams using changes in frequencies and amplitudes of frequency response functions. Journal of Sound and Vibration, 265(1):1–22, 2003. doi: 10.1016/S0022-460X(02)01264-6.
[14] M.M. Fayyadh and H.A. Razak. Weighting method for modal parameter based damage detection algorithms. International Journal of Physical Sciences, 6(20):4816–4825, 2011.
[15] R.K. Behera, A. Pandey, and D.R. Parhi. Numerical and experimental verification of a method for prognosis of inclined edge crack in cantilever beam based on synthesis of mode shapes. Procedia Technology, 14:67–74, 2014. doi: 10.1016/j.protcy.2014.08.010.
[16] S. Karimi, M. Bozorgnasab, R. Taghipour, and M. M. Alipour. A novel spring-based model for damage investigation of functionally graded beams. Journal of Solid Mechanics, 2021 (in print).
[17] S.S. Rao. The Finite Element Method in Engineering, 6th edition. Butterworth-Heinemann, 2018.
[18] A.K. Pandey, M. Biswas, and M.M. Samman. Damage detection from changes in curvature mode shapes. Journal of Sound and Vibration, 145(2):321–332, 1991. doi: 10.1016/0022-460X(91)90595-B.
[19] S.M. Seyedpoor. A two stage method for structural damage detection using a modal strain energy based index and particle swarm optimization. International Journal of Non-Linear Mechanics, 47(1):1–8, 2012. doi: 10.1016/j.ijnonlinmec.2011.07.011.
[20] M.M.A. Wahab and G. De Roeck. Damage detection in bridges using modal curvatures: application to a real damage scenario. Journal of Sound and Vibration, 226(2):217–235, 1999. doi: 10.1006/jsvi.1999.2295.
[21] A. Esfandiari, F. Bakhtiari-Nejad, and A. Rahai. Theoretical and experimental structural damage diagnosis method using natural frequencies through an improved sensitivity equation. International Journal of Mechanical Sciences, 70:79–89, 2013. doi: 10.1016/j.ijmecsci.2013.02.006.
Przejdź do artykułu

Autorzy i Afiliacje

Reza Taghipour
1
ORCID: ORCID
Mina Roodgar Nashta
1
ORCID: ORCID
Mohsen Bozorgnasab
2
ORCID: ORCID
Hessam Mirgolbabaei
3
ORCID: ORCID

  1. Department of Civil Engineering, University of Mazandaran, Babolsar, Iran.
  2. Department of Civil Engineering, University of Mazandaran, Babolsar, Iran
  3. Department of Mechanical and Industrial Engineering, University of Minnesota Duluth, Duluth, Minnesota, United States of America.
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

In this work, continuous third-order sliding mode controllers are presented to control a five degrees-of-freedom (5-DOF) exoskeleton robot. This latter is used in physiotherapy rehabilitation of upper extremities. The aspiration is to assist the movements of patients with severe motor limitations. The control objective is then to design adept controllers to follow desired trajectories smoothly and precisely. Accordingly, it is proposed, in this work, a class of homogeneous algorithms of sliding modes having finite-time convergence properties of the states. They provide continuous control signals and are robust regardless of non-modeled dynamics, uncertainties and external disturbances. A comparative study with a robust finite-time sliding mode controller proposed in literature is performed. Simulations are accomplished to investigate the efficacy of these algorithms and the obtained results are analyzed.
Przejdź do artykułu

Bibliografia

[1] N. Rehmat, J. Zuo, W. Meng, Q. Liu, S.Q. Xie, and H. Liang. Upper limb rehabilitation using robotic exoskeleton systems: a systematic review. International Journal of Intelligent Robotics and Applications, 2(3):283–295, 2018. doi: 10.1007/s41315-018-0064-8.
[2] A. Demofonti, G. Carpino, L. Zollo, and M.J. Johnson. Affordable robotics for upper limb stroke rehabilitation in developing countries: a systematic review. IEEE Transactions on Medical Robotics and Bionics, 3(1):11–20, 2021. doi: 10.1109/TMRB.2021.3054462.
[3] A.C. Lo, P.D. Guarino, L.G. Richards, J.K. Haselkorn, G.F. Wittenberg, D.G. Federman, R.J. Ringer, et al. Robot-assisted therapy for long-term upper-limb impairment after stroke. New England Journal of Medicine, 362(19):1772–1783, 2010. doi: 10.1056/NEJMoa0911341.
[4] P. Staubli, T. Nef, V. Klamroth-Marganska, and R. Riener. Effects of intensive arm training with the rehabilitation robot ARMin II in chronic stroke patients: four single-cases. Journal of NeuroEngineering and Rehabilitation, 6(1):46, 2009. doi: 10.1186/1743-0003-6-46.
[5] A.S. Niyetkaliyev, S. Hussain, M.H. Ghayesh, and G. Alici. Review on design and control aspects of robotic shoulder rehabilitation orthoses. IEEE Transactions on Human-Machine Systems, 47(6):1134–1145, 2017. doi: 10.1109/THMS.2017.2700634.
[6] A. Michnik, J. Brandt, Z. Szczurek, M. Bachorz, Z. Paszenda, R. Michnik, J. Jurkojc, W. Rycerski, and J. Janota. Rehabilitation robot prototypes developed by the ITAM Zabrze. Archive of Mechanical Engineering, 61(3):433–444, 2014. doi: 10.2478/meceng-2014-0024.
[7] A. Gmerek. Mechanical and hardware architecture of the semi-exoskeleton arm rehabilitation robot. Archive of Mechanical Engineering, 60(4):557-574, 2013. doi: 10.2478/meceng-2013-0034.
[8] I. Büsching, A. Sehle, J. Stürner, and J. Liepert. Using an upper extremity exoskeleton for semi-autonomous exercise during inpatient neurological rehabilitation – a pilot study. Journal of NeuroEngineering and Rehabilitation, 15(1):72, 2018. doi: 10.1186/s12984-018-0415-6.
[9] R. Fellag, T. Benyahia, M. Drias, M. Guiatni, and M. Hamerlain. Sliding mode control of a 5 dofs upper limb exoskeleton robot. In 2 017 5th International Conference on Electrical Engineering – Boumerdes (ICEE-B), pages 1–6, Boumerdes, Algeria, 29-31 Oct. 2017. doi: 10.1109/ICEE-B.2017.8192098.
[10] M.H. Rahman, M. Saad, J-P. Kenné, and P.S. Archambault. Control of an exoskeleton robot arm with sliding mode exponential reaching law. International Journal of Control, Automation and Systems, 11(1):92–104, 2013. doi: 10.1007/s12555-011-0135-1.
[11] T. Madani, B Daachi, and K. Djouani. Non-singular terminal sliding mode controller: Application to an actuated exoskeleton. Mechatronics, 33:136–145, 2016. doi: 10.1016/j.mechatronics.2015.10.012.
[12] A. Abooee, M.M. Arefi, F. Sedghi, and V. Abootalebi. Robust nonlinear control schemes for finite-time tracking objective of a 5-DOF robotic exoskeleton. International Journal of Control, 92(9):2178–2193, 2019. doi: 10.1080/00207179.2018.1430379.
[13] A. Riani, T. Madani, A. Benallegue, and K. Djouani. Adaptive integral terminal sliding mode control for upper-limb rehabilitation exoskeleton. Control Engineering Practice, 75:108–117, 2018. doi: 10.1016/j.conengprac.2018.02.013.
[14] A. Jebri, T. Madani, and K. Djouani. Adaptive continuous integral-sliding-mode controller for wearable robots: Application to an upper limb exoskeleton. In 2019 IEEE 16th International Conference on Rehabilitation Robotics (ICORR), pages 766–771, Toronto, Canada, 24-28 June 2019. doi: 10.1109/ICORR.2019.8779431.
[15] C.A. Zamora, J.A. Moreno, and S. Kamal. Control integral discontinuo para sistemas mecánicos. In Congreso Nacional de Control Automático 2013, pages 11–16. Ensenada, Mexico, Oct. 16- 18, 2013. (in Spanish).
[16] J.A. Moreno. Discontinuous integral control for systems with relative degree two. In: J. Clempner, W.Yu (eds.), New Perspectives and Applications of Modern Control Theory, pages 187–218. Springer, 2018. doi: 10.1007/978-3-319-62464-8_8.
[17] S. Kamal, J.A. Moreno, A. Chalanga, B. Bandyopadhyay, and L.M. Fridman. Continuous terminal sliding-mode controller. Automatica, 69:308–314, 2016. doi: 10.1016/j.automatica.2016.02.001.
[18] S. Kamal, A. Chalanga, J.A. Moreno, L. Fridman, and B. Bandyopadhyay. Higher order supertwisting algorithm. In: 2014 13th International Workshop on Variable Structure Systems (VSS), pages 1–5, Nantes, France, 29 June – 2 July 2014. doi: 10.1109/VSS.2014.6881129.
[19] A. Levant. Sliding order and sliding accuracy in sliding mode control. International Journal of Control, 58(6):1247–1263, 1993. doi: 10.1080/00207179308923053.
[20] J.A. Moreno and M. Osorio. Strict Lyapunov functions for the super-twisting algorithm. IEEE Transactions on Automatic Control, 57(4):1035–1040, 2012. doi: 10.1109/TAC.2012.2186179.
[21] J.A. Moreno and M. Osorio. A Lyapunov approach to second-order sliding mode controllers and observers. In: 2008 47th IEEE Conference on Decision and Control, pages 2856–2861, Cancun, Mexico, 9-11 December 2008. doi: 10.1109/CDC.2008.4739356.
[22] R. Fellag, M. Hamerlain, S. Laghrouche, M. Guiatni, and N. Achour. Homogeneous finite time higher order sliding mode control applied to an upper limb exoskeleton robot. In 2019 6th International Conference on Control, Decision and Information Technologies (CoDIT), pages 355–360, Paris, France, 23-26 April 2019. doi: 10.1109/CoDIT.2019.8820676.
[23] H-B. Kang and J-H. Wang. Adaptive control of 5 DOF upper-limb exoskeleton robot with improved safety. ISA Transactions, 52(6):844–852, 2013. doi: 10.1016/j.isatra.2013.05.003.
[24] H-B. Kang and J-H. Wang. Adaptive robust control of 5 DOF upper-limb exoskeleton robot. International Journal of Control, Automation and Systems, 13(3):733–741, 2015. doi: 10.1007/s12555-013-0389-x.
[25] B.O. Mushage, J.C. Chedjou, and K.Kyamakya. Fuzzy neural network and observer-based faulttolerant adaptive nonlinear control of uncertain 5-DOF upper-limb exoskeleton robot for passive rehabilitation. Nonlinear Dynamics, 87(3):2021–2037, 2017. doi: 10.1007/s11071-016-3173-7.
[26] M.W. Spong and M. Vidyasagar. Robot Dynamics and Control. John Wiley & Sons, 2008.
[27] A. Levant. Homogeneity approach to high-order sliding mode design. Automatica, 41(5):823–830, 2005. doi: 10.1016/j.automatica.2004.11.029.
[28] S. Kamal, A. Chalanga, V. Thorat, and B. Bandyopadhyay. A new family of continuous higher order sliding mode algorithm. In: 2015 10th Asian Control Conference (ASCC), pages 1–6, Kota Kinabalu, Malaysia, 31 May – 3 June 2015. doi: 10.1109/ASCC.2015.7244591.
[29] S.P. Bhat and D.S. Bernstein. Finite-time stability of continuous autonomous systems. SIAM Journal of Control and Optimization, 38(3):751–766, 2000. doi: 10.1137/S0363012997321358.
[30] J.J. Craig. Introduction to Robotics: Mechanics and Control, 3rd ed. Pearson Education International, 2009.
[31] J-H.Wang, Z-B. Jiang, X-F.Wang, Y. Zhang, and D. Guo. Kinematics simulation of upper limb rehabilitant robot based on virtual reality techniques. In: 2011 2nd International Conference on Artificial Intelligence, Management Science and Electronic Commerce (AIMSEC), pages 6681–6683, Deng Feng, China, 8-10 August 2011. doi: 10.1109/AIMSEC.2011.6009874.
Przejdź do artykułu

Autorzy i Afiliacje

Ratiba Fellag
1 3
ORCID: ORCID
Mohamed Guiatni
2
ORCID: ORCID
Mustapha Hamerlain
1
Noura Achour
3

  1. Centre de Développement des Technologies Avancées, Alger, Algérie.
  2. Laboratoire LCS^2, Ecole Militaire Polytechnique, Alger, Algérie.
  3. Laboratoire LRPE, Université des Sciences et de la Technologie Houari Boumediene, Alger, Algérie.
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The article describes motion planning of an underwater redundant manipulator with revolute joints moving in a plane under gravity and in the presence of obstacles. The proposed motion planning algorithm is based on minimization of the total energy in overcoming the hydrodynamic as well as dynamic forces acting on the manipulator while moving underwater and at the same time, avoiding both singularities and obstacle. The obstacle is considered as a point object. A recursive Lagrangian dynamics algorithm is formulated for the planar geometry to evaluate joint torques during the motion of serial link redundant manipulator fully submerged underwater. In turn the energy consumed in following a task trajectory is computed. The presence of redundancy in joint space of the manipulator facilitates selecting the optimal sequence of configurations as well as the required joint motion rates with minimum energy consumed among all possible configurations and rates. The effectiveness of the proposed motion planning algorithm is shown by applying it on a 3 degrees-of-freedom planar redundant manipulator fully submerged underwater and avoiding a point obstacle. The results establish that energy spent against overcoming loading resulted from hydrodynamic interactions majorly decides the optimal trajectory to follow in accomplishing an underwater task.
Przejdź do artykułu

Bibliografia

[1] D.E. Whitney. Resolved motion rate control of manipulators and human prostheses. IEEE Transaction on Man-Machine System, 10(2):47–53,1969. doi: 10.1109/TMMS.1969.299896.
[2] Z. Shiller and H-H. Lu. Computation of path constrained time optimal motions with dynamic singularities. Journal of Dynamic Systems, Measurement, and Control, 114(1):34–40,1992. doi: 10.1115/1.2896505.
[3] N. Faiz and S.K. Agrawal.Trajectory planning of robots with dynamics and inequalities. In Proceedings IEEE International Conference on Robotics and Automation, pages 3976–3982, 2000. doi: 10.1109/ROBOT.2000.845351.
[4] S. Macfarlane and E.A. Croft. Jerk-bounded manipulator trajectory planning: design for realtime applications. IEEE Transactions on Robotics and Automation, 19(1):42–52, 2003. doi: 10.1109/TRA.2002.807548.
[5] G. Antonelli, S. Chiaverini, and N. Sarkar. External force control for underwater vehiclemanipulator systems. IEEE Transactions on Robotics and Automation, 17(6):931–938, 2001. doi: 10.1109/70.976027.
[6] D. Yoerger and J. Slotine. Robust trajectory control of underwater vehicles. IEEE Journal of Oceanic Engineering, 10(4):462–470, 1985. doi: 10.1109/JOE.1985.1145131.
[7] A. Alvarez, A. Caiti, and R. Onken. Evolutionary path planning for autonomous underwater vehicles in a variable ocean. IEEE Journal of Oceanic Engineering, 29(2):418–429, 2004. doi: 10.1109/JOE.2004.827837.
[8] N. Sarkar and T.K. Podder. Coordinated motion planning and control of autonomous underwater vehicle-manipulator systems subject to drag optimization. IEEE Journal of Oceanic Engineering, 26(2):228–239, 2001. doi: 10.1109/48.922789.
[9] J. Yuh. Modeling and control of underwater robotic vehicles. IEEE Transactions on Systems, Man and Cybernetics, 20(6):1475–1483, 1990. doi: 10.1109/21.61218.
[10] B. Lévesque and M.J. Richard. Dynamic analysis of a manipulator in a fluid environment. International Journal of Robotics Research, 13(3):221–231, 1994. doi: 10.1177/027836499401300304.
[11] T.I. Fossen. Guidance and Control of Ocean Vehicles. John Wiley, New York, 1994.
[12] G. Antonelli. Underwater Robots. 2nd ed. Springer, 2006.
[13] T.J. Tarn, G.A. Shoults, and S.P. Yang. A dynamic model of an underwater vehicle with a robotic manipulator using Kane’s method. Autonomous Robots, 3:269–283, 1996. doi: 10.1007/BF00141159.
[14] J.M. Hollerbach. A recursive Lagrangian formulation of manipulator dynamics and a comparative study of dynamics formulation complexity. IEEE Transactions on Systems, Man, and Cybernetics, 10(11):730–736, 1980. doi: 10.1109/TSMC.1980.4308393.
[15] J.N. Newman. Marine Hydrodynamics. 40th Anniversary Edition. The MIT Press, 2018.
[16] A. Kumar, V. Kumar, and S. Sen. Dynamics of underwater manipulator: a recursive Lagrangian formulation. In R. Kumar, V.S. Chauhan, M. Talha, H. Pathak (Eds.), Machines, Mechanism and Robotics, Lecture Notes in Mechanical Engineering, pages 555–570. Springer, Singapure, 2022. doi: 10.1007/978-981-16-0550-5_56.
[17] A.K. Sharma and S.K. Saha. Simplified drag modeling for the dynamics of an underwater manipulator. IEEE Journal of Ocean Engineering, 46(1):40–55, 2021. doi: 10.1109/JOE.2019.2948412.
[18] R. Colbaugh, H. Seraji, and K.L. Glass. Obstacle avoidance for redundant robots using configuration control. Journal of Robotics Systems, 6(6):721–744,1989. doi: 10.1002/rob.4620060605.
Przejdź do artykułu

Autorzy i Afiliacje

Virendra Kumar
1
ORCID: ORCID
Soumen Sen
1
Shibendu Shekhar Roy
2

  1. Robotics and Automation Division, CSIR-Central Mechanical Engineering Research Institute, Durgapur, India
  2. Mechanical Engineering Department, National Institute of Technology, Durgapur, India
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Optimization of cooling systems is of major importance due to the economy of cooling water and energy in thermal installations in the industry. The hydrodynamic study of the film is a prerequisite for the study of the intensity of the heat transfer during the cooling of a horizontal plate by a liquid film. This experimental work made it possible to quantify the hydrodynamic parameters by a new approach, a relation linking the thickness of the film to the velocity was found as a function of the geometrical and hydrodynamic characteristics of the sprayer.
A new statistical approach has been developed for the measurement of the velocity, the liquid fluid arriving at the edge of the plate and having velocity V is spilled out like a projectile. The recovering of the liquid in tubes allowed us to quantify flow rates for different heights positions relative to the plate, statistical processing permitted us to assess the probable velocity with a margin of error.

Przejdź do artykułu

Bibliografia

[1] B. Abbasi. Pressure-based predection of spray cooling heat transfer. Ph.D. Thesis, University of Maryland, College Park, USA, 2010.
[2] E.G. Bratuta and L. Zanotchkine. Intensification of heat transfer by dispersed fluids. Machinostraenia Energy, 38(84):71--75, 1984. (in Russian).
[3] M. Tebbal. Correlation of the thermal transfer coefficient and the dispersion of the fluid on a surface at high temperature. In: 5th International Meeting on Heat Transfer, Monastir, Tunisia, 1991.
[4] W. Ambrosini, N. Forgione, F. Oriolo, P. Vigni, and S. Baessler. Experimental investigation on wave velocity in a falling film. In: 2nd International Symposium on Two-phase Flow Modelling and Experimentation, Pisa, Italy, May 23-26, 1999.
[5] W. Ambrosini, N. Forgione, and F. Oriolo. Statistical characteristics of a water film falling down a flat plate at different inclinations and temperatures. International Journal of Multiphase Flow, 28(9):1521-1540, 2002. doi: 10.1016/S0301-9322(02)00039-3.
[6] P. Adomeit and U. Renz. Hydrodynamics of three-dimensional waves in laminar falling films. International Journal of Multiphase Flow, 26(7):1183-1208, 2000. doi: 10.1016/S0301-9322(99)00079-8.
[7] S.V. Alekseenko, V.A. Antipin, A.V. Bobylev, and D.M. Markovich. Application of PIV to velocity measurements in a liquid film flowing down an inclined cylinder. Experiments in Fluids, 43:197-207, 2007. doi: 10.1007/s00348-007-0322-2.
[8] W. Aouad, J.R. Landel, S.B. Dalziel, J.F. Davidson, and D.I. Wilson. Particle image velocimetry and modelling of horizontal coherent liquid jets impinging on and draining down a vertical wall. Experimental Thermal and Fluid Science, 74:429-443, 2016. doi: 10.1016/j.expthermflusci.2015.12.010.
[9] A.C. Ashwood, S.J. Vanden Hogen, M.A. Rodarte, C.R. Kopplin, D.J. Rodríguez, E.T. Hurlburt, and T.A. Shedd. A multiphase, micro-scale PIV measurement technique for liquid film velocity measurements in annular two-phase flow. International Journal of Multiphase Flow, 68:27-39, 2015. doi: 10.1016/j.ijmultiphaseflow.2014.09.003.
[10] T. Takamasa and T. Hazuku. Measuring interfacial waves on film flowing down a vertical plate wall in the entry region using laser focus displacement meters. International Journal of Heat and Mass Transfer, 43(15):2807-2819, 2000. doi: 10.1016/S0017-9310(99)00335-X.
[11] K. Moran, J. Inumaru, and M. Kawaji. Instantaneous hydrodynamics of a laminar wavy liquid film. International Journal of Multiphase Flow, 28(5):731-755, 2002. doi: 10.1016/S0301-9322(02)00006-X.
[12] M. Tebbal and H. Mzad. An hydrodynamic study of a water jet dispersion beneath liquid sprayers. Forschung im Ingenieurwesen, 68(3):126-132, 2004. doi: 10.1007/s10010-003-0118-3. (in German).
[13] H. Mzad and M. Tebbal. Thermal diagnostics of highly heated surfaces using water-spray cooling. Heat and Mass Transfer, 45(3):287-295, 2009. doi: 10.1007/s00231-008-0431-3.
[14] E.S. Benilov, S.J. Chapman, J.B. McLeod, J.R. Ockendon, and V.S. Zubkov. On liquid films on an inclined plate. Journal of Fluid Mechanics, 663(25):53-69, 2010. doi: 10.1017/S002211201000337X.
[15] X.G. Huang, Y.H. Yang, P. Hu, and K. Bao. Experimental study of water-air countercurrent flow characteristics in large scale rectangular channel. Annals of Nuclear Energy, 69:125-133, 2014. doi: 10.1016/j.anucene.2014.02.005.
[16] Y.Q. Yu and X. Cheng. Experimental study of water film flow on large vertical and inclined flat plate. Progress in Nuclear Energy, 77:176-186, 2014.doi: 10.1016/j.pnucene.2014.07.001.
[17] H. Mzad and M. Elguerri. Simulation of twin overlapping sprays underneath hydraulic atomizers: influence of spray hydrodynamic parameters. Atomization and Sprays, 22(5):447-460, 2012. doi: 10.1615/AtomizSpr.2012006076.
[18] K. Choual, R. Benzeguir, and M. Tebbal. Experimental study of the dispersion beneath liquid sprayers in the intersection area of jets on a horizontal plate. Mechanika, 23(6):835-844, 2017. doi: 10.5755/j01.mech.23.6.17243.
[19] W-F. Du, Y-H. Lu, R-C. Zhao, L. Chang, and H-J. Chang. Film thickness of free falling water flow on a large-scale ellipsoidal surface. Progress in Nuclear Energy, 105:1-7, 2018. doi: 10.1016/j.pnucene.2017.12.007.
[20] C.B. Tibiriçá, F.J. do Nascimento, and G. Ribatski. Film thickness measurement techniques applied to micro-scale two-phase flow systems. Experimental Thermal and Fluid Science, 34(4):463-473, 2010. doi: 10.1016/j.expthermflusci.2009.03.009.
[21] H. Ouldrebai, E.K. Si-Ahmed, M. Hammoudi, J. Legrand, Y. Salhi, and J. Pruvost. A laser multi-reflection technique applied for liquid film flow measurements. Experimental Techniques, 43:213-223, 2019. doi: 10.1007/s40799-018-0279-5.
[22] J. Cai and X. Zhuo. Researches on hydrodynamics of liquid film flow on inclined plate using diffuse-interface method. Heat and Mass Transfer, 56:1889-1899, 2020. doi: 10.1007/s00231-020-02829-6.
[23] E.G Bratuta and M. Tebbal. Influence of the jet on the fluid dispersion. IzvestiaVouzob, Métallurgie, 12:108-111, 1983.
[24] B. Patrick, B. Barber, and D. Brown. Practical aspects of the design, operation and performance of caster spray systems. Revue de Métallurgie, 98(4):383-390, 2001. doi: 10.1051/metal:2001192.
Przejdź do artykułu

Autorzy i Afiliacje

Abdelbaki Elmahi
1
ORCID: ORCID
Touhami Baki
1
ORCID: ORCID
Mohamed Tebbal
1

  1. Faculty of Mechanics, Gaseous Fuels and Environment Laboratory, University of Sciences and Technology of Oran Mohamed Boudiaf (USTO-MB), El Mnaouer, Oran, Algeria.
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

This study aims to optimize the 2-cylinder in-line reciprocating compressor crankshaft. As the crankshaft is considered the "bulkiest" component of the reciprocating compressor, its weight reduction is the focus of current research for improved performance and lower cost. Therefore, achieving a lightweight crankshaft without compromising the mechanical properties is the core objective of this study. Computational analysis for the crankshaft design optimization was performed in the following steps: kinematic analysis, static analysis, fatigue analysis, topology analysis, and dynamic modal analysis. Material retention by employing topology optimization resulted in a significant amount of weight reduction. A weight reduction of approximately 13% of the original crankshaft was achieved. At the same time, design optimization results demonstrate improvement in the mechanical properties due to better stress concentration and distribution on the crankshaft. In addition, material retention would also contribute to the material cost reduction of the crankshaft. The exact 3D model of the optimized crankshaft with complete design features is the main outcome of this research. The optimization and stress analysis methodology developed in this study can be used in broader fields such as reciprocating compressors/engines, structures, piping, and aerospace industries.
Przejdź do artykułu

Bibliografia

[1] Z.P. Mourelatos. A crankshaft system model for structural dynamic analysis of internal combustion engines. Computers & Structures, 79(20-21):2009–2027, 2001. doi: 10.1016/S0045-7949(01)00119-5.
[2] A.P. Druschitz, D.C. Fitzgerald, and I. Hoegfeldt. Lightweight crankshafts. SAE Technical Paper 2006-01-0016, 2006. doi: 10.4271/2006-01-0016.
[3] K. Mizoue, Y. Kawahito, and K. Mizogawa. Development of hollow crankshaft. Honda R&D Technical Review 2009, pages 243–245, 2009.
[4] I. Papadimitriou and K. Track. Lightweight potential of crankshafts with hollow design. MTZ Worldwide, 79:42–45, 2018. doi: 10.1007/s38313-017-0140-8.
[5] M. Roeper and S. Reinsch. Hydroforging: a new manufacturing technology for forged lightweight products of aluminum. Proceedings of the ASME 2005 International Mechanical Engineering Congress and Exposition. Manufacturing Engineering and Materials Handling, Parts A and B, pages 297-304. Orlando, Florida, USA, November 5–11, 2005. doi: 10.1115/IMECE2005-80424.
[6] J. Lampinen. Cam shape optimization by genetic algorithm. Computer-Aided Design, 35(8):727–737. doi: 10.1016/S0010-4485(03)00004-6.
[7] A. Albers, N. Leon, H. Aguayo, and T. Maier. Multi-objective system optimization of engine crankshafts using an integration approach. Proceedings of the ASME 2008 International Mechanical Engineering Congress and Exposition. Volume 14: New Developments in Simulation Methods and Software for Engineering Applications, pages 101–109. Boston, Massachusetts, USA. October 31–November 6, 2008. doi: 10.1115/IMECE2008-67447.
[8] J.P. Henry, J. Topolsky, and M. Abramczuk. Crankshaft durability prediction – a new 3-D approach. SAE Technical Paper 920087, 1992. doi: 10.4271/920087.
[9] M. Guagliano, A. Terranova, and L. Vergani. Theoretical and experimental study of the stress concentration factor in diesel engine crankshafts. Journal of Mechanical Design, 115(1):47–52, 1993. doi: 10.1115/1.2919323.
[10] A.C.C. Borges, L.C. Oliveira, and P.S. Neto. Stress distribution in a crankshaft crank using a geometrically restricted finite element model. SAE Technical Paper 2002-01-2183, 2002. doi: 10.4271/2002-01-2183.
[11] D. Taylor, W. Zhou, A.J. Ciepalowicz, and J. Devlukia. Mixed-mode fatigue from stress concentrations: an approach based on equivalent stress intensity. International Journal of Fatigue, 21(2):173–178, 1999. doi: 10.1016/S0142-1123(98)00066-8.
[12] W. Li, Q. Yan, and J. Xue. Analysis of a crankshaft fatigue failure. Engineering Failure Analysis, 55:13-9-147, 2015. doi: 10.1016/j.engfailanal.2015.05.013.
[13] R.M. Metkar, V.K. Sunnapwar, and S.D. Hiwase. Comparative evaluation of fatigue assessment techniques on a forged steel crankshaft of a single cylinder diesel engine. Proceedings of the ASME 2012 International Mechanical Engineering Congress and Exposition. Volume 3: Design, Materials and Manufacturing, Parts A, B, and C, pages 601–609. Houston, Texas, USA, November 9–15, 2012. doi: 10.1115/IMECE2012-85493.
[14] Y. Shi, L. Dong, H.Wang, G. Li, and S. Liu. Fatigue features study on the crankshaft material of 42CrMo steel using acoustic emission. Frontiers of Mechanical Engineering, 11(3):233–241, 2016. doi: 10.1007/s11465-016-0400-3.
[15] J. Yao and J. Zhang. A modal analysis for vehicle’s crankshaft. 2017 IEEE 3rd Information Technology and Mechatronics Engineering Conference, pages 300–303, 2017. doi: 10.1109/ITOEC.2017.8122303.
[16] A.S. Mendes, E. Kanpolat, and R. Rauschen. Crankcase and crankshaft coupled structural analysis based on hybrid dynamic simulation. SAE International Journal of Engines, 6(4):2044– 2053, 2013. doi: 10.4271/2013-01-9047.
[17] B. Yu, Q. Feng, and X. Yu. Dynamic simulation and stress analysis for reciprocating compressor crankshaft. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 227(4):845–851, 2013. doi: 10.1177/0954406212453523.
[18] A. Arshad, S. Samarasinghe, M.A.F. Ameer, and A. Urbahs. A simplified design approach for high-speed wind tunnels. Part I: Table of inclination. Journal of Mechanical Science and Technology, 34(6):2455–2468, 2020. doi: 10.1007/s12206-020-0521-9.
[19] A. Arshad, S. Samarasinghe, and V. Kovalcuks. A simplified design approach for high-speed wind tunnels. Part-I.I: Optimized design of settling chamber and inlet nozzle. 2020 11th International Conference on Mechanical and Aerospace Engineering (ICMAE), pages 150–154, 2020. doi: 10.1109/ICMAE50897.2020.9178865.
[20] A. Arshad, M.A.F. Ameer, and O. Kovzels. A simplified design approach for high-speed wind tunnels. Part II: Diffuser optimization and complete duct design. Journal of Mechanical Science and Technology, 35(7):2949–2960, 2021. doi: 10.1007/s12206-021-0618-9.
[21] A. Arshad, N. Andrew, and I. Blumbergs. Computational study of noise reduction in CFM56-5B using core nozzle chevrons. 2020 11th International Conference on Mechanical and Aerospace Engineering (ICMAE), pages 162-167, 2020. doi: 10.1109/ICMAE50897.2020.9178891.
[22] A. Arshad, L.B. Rodrigues, and I.M. López. Design optimization and investigation of aerodynamic characteristics of low Reynolds number airfoils. International Journal of Aeronautical and Space Sciences, 22:751–764, 2021. doi: 10.1007/s42405-021-00362-2.
[23] A. Arshad, A.J. Kallungal and A.E.E.E. Elmenshawy. Stability analysis for a concept design of Vertical Take-Off and Landing (VTOL) Unmanned Aerial Vehicle (UAV). 2021 International Conference on Military Technologies (ICMT), pages 1–6, 2021. doi: 10.1109/ICMT52455.2021.9502764.
[24] RanTong official database for the ZW-0.8/10-16 reciprocating compressor specifications, online resources.
[25] F. Rodriges Minucci, A.A. dos Santos, and R.A. Lime e Silva. Comparison of multiaxial fatigue criteria to evaluate the life of crankshafts. Proceedings of the ASME 2010 International Mechanical Engineering Congress and Exposition. Volume 11: New Developments in Simulation Methods and Software for Engineering Applications; Safety Engineering, Risk Analysis and Reliability Methods; Transportation Systems, pages 775–784. Vancouver, British Columbia, Canada. November 12–18, 2010. doi: 10.1115/IMECE2010-39018.
[26] Y.F. Sun, H.B. Qiu, L. Gao, K. Lin, and X.Z. Chu. Stochastic response surface method based on weighted regression and its application to fatigue reliability analysis of crankshaft. Proceedings of the ASME 2009 International Mechanical Engineering Congress and Exposition. Volume 13: New Developments in Simulation Methods and Software for Engineering Applications; Safety Engineering, Risk Analysis and Reliability Methods; Transportation Systems, pages 263-268. Lake Buena Vista, Florida, USA. November 13–19, 2009. doi: 10.1115/IMECE2009-11095.
[27] Y. Gorash, T. Comlekci, and D.MacKenzie. Comparative study of FE-models and material data for fatigue life assessments of welded thin-walled cross-beam connections. Procedia Engineering, 133:420–432, 2015. doi: 10.1016/j.proeng.2015.12.612.
[28] C. Cevik and E. Kanpolat. Achieving optimum crankshaft design – I. SAE Technical Paper 2014-01-0930, 2014. doi: 10.4271/2014-01-0930.
[29] G. Mu, F.Wang, and X. Mi. Optimum design on structural parameters of reciprocating refrigeration compressor crankshaft. Proceedings of the 2016 International Congress on Computation Algorithms in Engineering, pages 281–286, 2016. doi: 10.12783/dtcse/iccae2016/7204.
Przejdź do artykułu

Autorzy i Afiliacje

Ali Arshad
1
ORCID: ORCID
Pengbo Cong
2
Adham Awad Elsayed Elmenshawy
1
Ilmārs Blumbergs
1
ORCID: ORCID

  1. Institute of Aeronautics, Faculty of Mechanical Engineering, Transport and Aeronautics, Riga Technical University, Latvia
  2. Institute of Mechanics and Mechanical Engineering, Faculty of Mechanical Engineering, Transport and Aeronautics, Riga Technical University, Latvia
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Considering the importance of gear systems as one of the important vibration and noise sources in power transmission systems, an active control for suppressing gear vibration is presented in this paper. A gear bearing model is developed and used to design an active control gear-bearing system. Two possible configurations of control system are designed based on active bearing and active gear-shaft torsional coupling to control and reduce the disturbance affecting system components. The controller for computing the actuation force is designed by using the H-infinity control approach. Simulation results indicate that the desired controller can efficiently be used for vibration control of gear bearing systems.
Przejdź do artykułu

Bibliografia

[1] H.N. Özgüven and D.R. Houser. Dynamic analysis of high speed gears by using loaded static transmission error. Journal of Sound and Vibration, 125(1):383–411, 1988. doi: 10.1016/0022-460X(88)90416-6.
[2] T.J. Sutton, S.J. Elliott, M.J. Brennan, K.H. Heron and D.A.C. Jessop. Active isolation of multiple structural waves on a helicopter gearbox support strut. Journal of Sound and Vibration, 205(1):81–101, 1997. doi: 10.1006/jsvi.1997.0972.
[3] G.T. Montague, A.F. Kaskak, A. Palazzolo, D. Manchala, and E. Thomas. Feed-forward control of gear mesh vibration using piezoelectric actuators. Shock and Vibration, 1(5):473–484 1994. doi: 10.3233/SAV-1994-1507.
[4] B. Rebbechi, C. Howard, and C. Hansen. Active control of gearbox vibration. Proceedings of the Active Control of Sound and Vibration Conference, pages 295–304, Fort Lauderdale, Florida, USA, 02-04 December, 1999.
[5] M.H. Chen and M.J. Brennan. Active control of gear vibration using specially configured sensors and actuators. Smart Materials and Structures, 9:342–350, 2000. doi: 10.1088/0964-1726/9/3/315.
[6] M. Li, T.C. Lim, and W.S. Shepard Jr. Modeling active vibration control of a geared rotor system. Smart Materials and Structures, 13:449–458, 2004. doi: 10.1088/0964-1726/13/3/001.
[7] Y.H. Guan, T.C. Lim, and W.S. Shepard Jr. Experimental study on active vibration control of a gearbox system. Journal of Sound and Vibration, 282(3-5):713–733, 2005. doi: 10.1016/j.jsv.2004.03.043.
[8] Y.H. Guan, M. Li, T.C. Lim, and W.S. Shepard Jr. Comparative analysis of actuator concept for active gear pair vibration control. Journal of Sound and Vibration, 269(1-2):273–294, 2004. doi: 10.1016/S0022-460X(03)00072-5.
[9] Y. Li, F. Zhang, Q. Ding, and L. Wang. Method and experiment study for active vibration control of gear meshing. Zhendong Gongcheng Xuebao/Journal of Vibration Engineering, 27(2):215–221, 2014.
[10] W. Gao, L. Wang, and Y. Liu. A modified adaptive filtering algorithm with online secondary path identification used for suppressing gearbox vibration. Journal of Mechanical Science and Technology, 30(11):4833–4843, 2016. doi: 10.1007/s12206-016-1002-z.
[11] W. Sun, F. Zhang, H. Li, H. Wang, and S. Luo. Co-simulation study on vibration control of multistage gear transmission system based on multiple control algorithms. Proceedings of the 2017 International Conference on Advanced Mechatronic Systems, pages 1–7, Xiamen, China, 2017. doi: 10.1109/ICAMechS.2017.8316474.
[12] W. Sun, F. Zhang, W. Zhu, H. Wang, S. Luo, and H. Li. A comparative study based on different control algoritms for suppressing multistage gear transmission system vibrations. Shock and Vibration, 2018:ID7984283, 2018. doi: 10.1155/2018/7984283.
[13] H. Wang, F. Zhang, H. Li, W. Sun, and S. Luo. Experimental analysis of an active vibration frequency control in gearbox. Shock and Vibration, 2018:ID7984283, 2018. doi: 10.1155/2018/1402697.
[14] C. Lauwerys, J. Swevers, and P. Sas. Robust linear control of an active suspension on a quarter car test-rig. Control Engineering Practice, 13(5):577–586, 2005. doi: 10.1016/ j.conengprac.2004.04.018.
[15] W. Sun, J. Li, Y. Zhao, and H. Gao. Vibration control for active seat suspension systems via dynamic output feedback with limited frequency characteristic. Mechatronics, 21(1):250–260, 2011. doi: 10.1016/j.mechatronics.2010.11.001.
[16] A. Farshidianfar, A. Saghafi, S.M. Kalami, and I. Saghafi. Active vibration isolation of machinery and sensitive equipment using H∞ control criterion and particle swarm optimization method. Meccanica, 47:437–453, 2012. doi: 10.1007/s11012-011-9451-z.
[17] R. Eberhart and J. Kennedy. A new optimizer using particle swarm theory. In Proceedings of the Sixth International Symposium on Micro Machine and Human Science, Nagoya, Japan, 4-6 October, 1995. doi: doi.org/10.1109/MHS.1995.494215">10.1109/MHS.1995.494215.
[18] J.F. Schutte and A.A. Groenwold. A study of global optimization using particle swarms. Journal of Global Optimization, 31:93–108, 2005. doi: 10.1007/s10898-003-6454-x.
[19] D. Sedighizadeh and E. Masehian. Particle swarm optimization methods, taxonomy and applications. International Journal of Computer Theory and Engineering, 1(5):1793-8201, 2009.
[20] A. Saghafi, A. Farshidianfar, and A.A. Akbari. Vibrations control of gear-bearing dynamic system. Modares Mechanical Engineering, 14(6):135-143, 2014. (in Persian).
[21] A. Farshidianfar and A. Saghafi. Global bifurcation and chaos analysis in nonlinear vibration of spur gear systems. Nonlinear Dynamics, 75:783–806, 2014. doi: 10.1007/s11071-013-1104-4.
[22] A. Saghafi and A. Farshidianfar. An analytical study of controlling chaotic dynamics in a spur gear system. Mechanism and Machine Theory, 96(1):179–191, 2016. doi: 10.1016/j.mechmachtheory.2015.10.002.
[23] G. Pinte, S. Devos, B. Stallaert, W. Symens, J. Swevers, and P. Sas. A piezo-based bearing for the active structural acoustic control of rotating machinery. Journal of Sound and Vibration, 329(9):1235–1253, 2010. doi: 10.1016/j.jsv.2009.10.036.
[24] S. Skogestad and I. Postlethwaite. Multivariable Feedback Control: Analysis and Design. 2nd ed., Wiley Interscience, New York, 2005.
Przejdź do artykułu

Autorzy i Afiliacje

Amin Saghafi
1
ORCID: ORCID
Anooshirvan Farshidianfar
2

  1. Department of Mechanical Engineering, Birjand University of Technology, Birjand, Iran
  2. Department of Mechanical Engineering, Ferdowsi University of Mashhad, Mashhad, Iran

Instrukcja dla autorów

About the Journal
Archive of Mechanical Engineering is an international journal publishing works of wide significance, originality and relevance in most branches of mechanical engineering. The journal is peer-reviewed and is published both in electronic and printed form. Archive of Mechanical Engineering publishes original papers which have not been previously published in other journal, and are not being prepared for publication elsewhere. The publisher will not be held legally responsible should there be any claims for compensation. The journal accepts papers in English.

Archive of Mechanical Engineering is an Open Access journal. The journal does not have article processing charges (APCs) nor article submission charges.

Original high quality papers on the following topics are preferred:

  • Mechanics of Solids and Structures,
  • Fluid Dynamics,
  • Thermodynamics, Heat Transfer and Combustion,
  • Machine Design,
  • Computational Methods in Mechanical Engineering,
  • Robotics, Automation and Control,
  • Mechatronics and Micro-mechanical Systems,
  • Aeronautics and Aerospace Engineering,
  • Heat and Power Engineering.

All submissions to the AME should be made electronically via Editorial System - an online submission and peer review system at: https://www.editorialsystem.com/ame

More detailed instructions for Authors can be found there.

Recenzenci


The Editorial Board of the Archive of Mechanical Engineering (AME) sincerely expresses gratitude to the following individuals who devoted their time to review papers submitted to the journal. Particularly, we express our gratitude to those who reviewed papers several times.

List of reviewers in 2023

Sara I. ABDELSALAM – University of California Riverside, United States
M. ARUNA – Liwa College of Technology, United Arab Emirates
Krzysztof BADYDA – Warsaw University of Technology, Poland
Nathalie BÄSCHLIN – Kunstmuseum Bern, Germany
Joanna BIJAK – Silesian University of Technology, Gliwice, Poland
Tomas BODNAR – The Czech Academy of Sciences, Prague, Czech Republic
Dariusz BUTRYMOWICZ – Białystok University of Technology, Poland
Suleyman CAGAN – Mechanical Engineering, Mersin University, Turkey
Claudia CASAPULLA – University of Naples Federico II, Italy
Peng CHEN – Northwestern Polytechnical University, Xi’an, China
Yao CHENG – Southwest Jiaotong University, Chengdu, China
Jan de JONG – University of Twente, Netherlands
Mariusz DEJA – Gdańsk University of Technology, Poland
Jerzy EJSMONT – Gdańsk University of Technology, Poland
İsmail ESEN – Karabuk University, Turkey
Pedro Javier GAMEZ-MONTERO – Universitat Politecnica de Catalunya, Spain
Aman GARG – National Institute of Technology, Kurukshetra, India
Michał HAĆ – Warsaw University of Technology, Poland
Satoshi ISHIKAWA – Kyushu University, Japan
Jacek JACKIEWICZ – Kazimierz Wielki University, Bydgoszcz, Poland
Krzysztof JAMROZIAK – Wrocław University of Technology, Poland
Hong-Lae JANG – Changwon National University, Korea (South)
Łukasz JANKOWSKI – Institute of Fluid-Flow Machinery, PAS, Gdansk, Poland
Albizuri JOSEBA – University of the Basque Country, Spain
Łukasz KAPUSTA – Warsaw University of Technology, Poland
Dariusz KARDAŚ – Institute of Fluid-Flow Machinery, PAS, Gdansk, Poland
Panagiotis KARMIRIS-OBRATAŃSKI – AGH University of Science and Technology, Cracow, Poland
Sivakumar KARTHIKEYAN – SRM Nagar
Tarek KHELFA – Hunan University of Humanities Science and Technology, China
Sven-Joachim KIMMERLE – Universität der Bundeswehr München, Germany
Thomas KLETSCHKOWSKI – HAW Hamburg, Germany
Piotr KLONOWICZ – Institute of Fluid-Flow Machinery, PAS, Gdansk, Poland
Vladis KOSSE – Queensland University of Technology, Australia
Mariusz KOSTRZEWSKI – Warsaw University of Technology, Poland
Maria KOTELKO – Lodz University of Technology, Poland
Michał KOWALIK – Warsaw University of Technology, Poland
Zbigniew KRZEMIANOWSKI – Institute of Fluid-Flow Machinery, Gdańsk, Poland
Slawomir KUBACKI – Warsaw University of Technology, Poland
Mieczysław KUCZMA – Poznan University of Technology, Poland
Waldemar KUCZYŃSKI – The Koszalin University of Technology, Poland
Rafał KUDELSKI – AGH University of Science and Technology, Cracow, Poland
Rajesh KUMAR – Sant Longowal Institute of Engineering and Technology, India
Mustafa KUNTOĞLU – Selcuk University, Turkey
Anna LEE – Pohang University of Science and Technology, South Korea, Korea (South)
Guolong LI – Chongqing University, China
Luxian LI – Xi'an Jiaotong University, China
Yingchao LI – Ludong University, Yantai, China
Xiaochuan LIN – Nanjing Tech University, China
Zhihong LIN – HuaQiao University, China
Yakun LIU – Massachusetts Institute of Technology, United States
Jinjun LU – Northwest University, Xiʼan, China
Paweł MACIĄG – Warsaw University of Technology, Poland
Paweł MALCZYK – Warsaw University of Technology, Poland
Emil MANOACH – Bulgarian Academy of Sciences, Sofia, Bulgaria
Mihaela MARIN – “Dunărea de Jos” University of Galati, Romania
Miloš MATEJIĆ – University of Kragujevac, Serbia
Krzysztof MIANOWSKI – Warsaw University of Technology, Poland
Tran MINH TU – Hanoi University of Civil Engineering, Viet Nam
Farhad Sadegh MOGHANLOU – University of Mohaghegh Ardabili, Ardabil, Iran
Mohsen MOTAMEDI – University of Isfahan, Iran
Adis MUMINOVIC – University of Sarajevo, Bosnia and Herzegovina
Mohamed NASR – National Research Centre, Giza, Egypt
Huu-That NGUYEN – Nha Trang University, Viet Nam
Tan-Luy NGUYEN – Ho Chi Minh City University of Technology, Viet Nam
Viorel PALEU – Gheorghe Asachi Technical University of Iasi, Romania
Nicolae PANC – Technical University of Cluj-Napoca, Romania
Marcin PĘKAL – Warsaw University of Technology, Poland
Van Vinh PHAM – Le Quy Don Technical University, Hanoi, Viet Nam
Vaclav PISTEK – Brno University of Technology, Czech Republic
Paweł PYRZANOWSKI – Warsaw University of Technology, Poland
Lei QIN – Beijing Information Science & Technology University, China
Milan RACKOV – University of Novi Sad, Serbia
Yuriy ROMASEVYCH – National University of Life and Environmental Sciences of Ukraine, Kiev, Ukraine
Artur RUSOWICZ – Warsaw University of Technology, Poland
Andrzej SACHAJDAK – Silesian University of Technology, Gliwice, Poland
Mirosław SEREDYŃSKI – Warsaw University of Technology, Poland
Maciej SUŁOWICZ – Cracow University of Technology, Poland
Biswajit SWAIN – National Institute of Technology, Rourkela, India
Tadeusz SZYMCZAK – Motor Transport Institute, Warsaw, Poland
Reza TAHERDANGKOO – Institute of Geotechnics, Freiberg, Germany
Rulong TAN – Chongqing University of Technology, China
Daniel TOBOŁA – Łukasiewicz Research Network - Cracow Institute of Technology, Poland
Milan TRIFUNOVIĆ – University of Niš, Serbia
Duong VU – Duy Tan University, Viet Nam
Shaoke WAN – Xi’an Jiaotong University, China
Dong WEI – Northwest A&F University, Yangling , China
Marek WOJTYRA – Warsaw University of Technology, Poland
Mateusz WRZOCHAL – Kielce University of Technology, Poland
Hugo YAÑEZ-BADILLO – TecNM: Tecnológico de Estudios Superiores de Tianguistenco, Mexico
Guichao YANG – Nanjing Tech University, China
Xiao YANG – Chongqing Technology and Business University, China
Yusuf Furkan YAPAN – Yildiz Technical University, Turkey
Luhe ZHANG – Chongqing University, China
Xiuli ZHANG – Shandong University of Technology, Zibo, China

List of reviewers in 2022
Isam Tareq ABDULLAH – Middle Technical University, Baghdad, Iraq
Ahmed AKBAR – University of Technology, Iraq
Nandalur AMER AHAMMAD – University of Tabuk, Saudi Arabia
Ali ARSHAD – Riga Technical University, Latvia
Ihsan A. BAQER – University of Technology, Iraq
Thomas BAR – Daimler AG, Stuttgart, Germany
Huang BIN – Zhejiang University, Zhoushan, China
Zbigniew BULIŃSKI – Silesian University of Technology, Poland
Onur ÇAVUSOGLU – Gazi University, Turkey
Ali J CHAMKHA – Duy Tan University, Da Nang , Vietnam
Dexiong CHEN – Putian University, China
Xiaoquan CHENG – Beihang University, Beijing, China
Piotr CYKLIS – Cracow University of Technology, Poland
Agnieszka DĄBSKA – Warsaw University of Technology, Poland
Raphael DEIMEL – Berlin University of Technology, Germany
Zhe DING – Wuhan University of Science and Technology, China
Anselmo DINIZ – University of Campinas, São Paulo, Brazil
Paweł FLASZYŃSKI – Institute of Fluid-Flow Machinery, Gdańsk, Poland
Jerzy FLOYRAN – University of Western Ontario, London, Canada
Xiuli FU – University of Jinan, China
Piotr FURMAŃSKI – Warsaw University of Technology, Poland
Artur GANCZARSKI – Cracow University of Technology, Poland
Ahmad Reza GHASEMI– University of Kashan, Iran
P.M. GOPAL – Anna University, Regional Campus Coimbatore, India
Michał GUMNIAK – Poznan University of Technology, Poland
Bali GUPTA – Jaypee University of Engineering and Technology, India
Dmitriy GVOZDYAKOV – Tomsk Polytechnic University, Russia
Jianyou HAN – University of Science and Technology, Beijing, China
Tomasz HANISZEWSKI – Silesian University of Technology, Poland
Juipin HUNG – National Chin-Yi University of Technology, Taichung, Taiwan
T. JAAGADEESHA – National Institute of Technology, Calicut, India
Jacek JACKIEWICZ – Kazimierz Wielki University, Bydgoszcz, Poland
JC JI – University of Technology, Sydney, Australia
Feng JIAO – Henan Polytechnic University, Jiaozuo, China
Daria JÓŹWIAK-NIEDŹWIEDZKA – Institute of Fundamental Technological Research, Warsaw, Poland
Rongjie KANG – Tianjin University, China
Dariusz KARDAŚ – Institute of Fluid-Flow Machinery, Gdansk, Poland
Leif KARI – KTH Royal Institute of Technology, Sweden
Daria KHANUKAEVA – Gubkin Russian State University of Oil and Gas, Russia
Sven-Joachim KIMMERLE – Universität der Bundeswehr München, Germany
Yeong-Jin KING – Universiti Tunku Abdul Rahman, Malaysia
Kaushal KISHORE – Tata Steel Limited, Jamshedpur, India
Nataliya KIZILOVA – Warsaw University of Technology, Poland
Adam KLIMANEK – Silesian University of Technology, Poland
Vladis KOSSE – Queensland University of Technology, Australia
Maria KOTEŁKO – Lodz University of Technology, Poland
Roman KRÓL – Kazimierz Pulaski University of Technology and Humanities in Radom, Poland
Krzysztof KUBRYŃSKI – Airforce Institute of Technology, Warsaw, Poland
Mieczysław KUCZMA – Poznan University of Technology, Poland
Paweł KWIATOŃ – Czestochowa University of Technology, Poland
Lihui Lang – Beihang University, China
Rafał LASKOWSKI – Warsaw University of Technology, Poland
Guolong Li – Chongqing University, China
Leo Gu LI – Guangzhou University, China
Pengnan LI – Hunan University of Science and Technology, China
Nan LIANG – University of Toronto, Mississauga, Canada
Michał LIBERA – Poznan University of Technology, Poland
Wen-Yi LIN – Hungkuo Delin University of Technology, Taiwan
Wojciech LIPINSKI – Austrialian National University, Canberra, Australia
Linas LITVINAS – Vilnius University, Lithuania
Paweł MACIĄG – Warsaw University of Technology, Poland
Krishna Prasad MADASU – National Institute of Technology Raipur, Chhattisgarh, India
Trent MAKI – Amino North America Corporation, Canada
Marco MANCINI – Institut für Energieverfahrenstechnik und Brennstofftechnik, Germany
Piotr MAREK – Warsaw University of Technology, Poland
Miloš MATEJIĆ – University of Kragujevac, Serbia
Phani Kumar MEDURI – VIT-AP University, Amaravati, India
Fei MENG – University of Shanghai for Science and Technology, China
Saleh MOBAYEN – University of Zanjan, Iran
Vedran MRZLJAK – Rijeka University, Croatia
Adis MUMINOVIC – University of Sarajevo, Bosnia and Herzegovina
Mohamed Fawzy NASR – National Research Centre, Giza, Egypt
Paweł OCŁOŃ – Cracow University of Technology, Poland
Yusuf Aytaç ONUR – Zonguldak Bulent Ecevit University, Turkey
Grzegorz ORZECHOWSKI – LUT University, Lappeenranta, Finland
Halil ÖZER – Yıldız Technical University, Turkey
Muthuswamy PADMAKUMAR – Technology Centre Kennametal India Ltd., Bangalore, India
Viorel PALEU – Gheorghe Asachi Technical University of Iasi, Romania
Andrzej PANAS – Warsaw Military Academy, Poland
Carmine Maria PAPPALARDO – University of Salerno, Italy
Paweł PARULSKI – Poznan University of Technology, Poland
Antonio PICCININNI – Politecnico di Bari, Italy
Janusz PIECHNA – Warsaw University of Technology, Poland
Vaclav PISTEK – Brno University of Technology, Czech Republic
Grzegorz PRZYBYŁA – Silesian University of Technology, Poland
Paweł PYRZANOWSKI – Warsaw University of Technology, Poland
K.P. RAJURKARB – University of Nebraska-Lincoln, United States
Michał REJDAK – Institute of Chemical Processing of Coal, Zabrze, Poland
Krzysztof ROGOWSKI – Warsaw University of Technology, Poland
Juan RUBIO – University of Minas Gerais, Belo Horizonte, Brazil
Artur RUSOWICZ – Warsaw University of Technology, Poland
Wagner Figueiredo SACCO – Universidade Federal Fluminense, Petropolis, Brazil
Andrzej SACHAJDAK – Silesian University of Technology, Poland
Bikash SARKAR – NIT Meghalaya, Shillong, India
Bozidar SARLER – University of Lubljana, Slovenia
Veerendra SINGH – TATA STEEL, India
Wieńczysław STALEWSKI – Institute of Aviation, Warsaw, Poland
Cyprian SUCHOCKI – Institute of Fundamental Technological Research, Warsaw, Poland
Maciej SUŁOWICZ – Cracov University of Technology, Poland
Wojciech SUMELKA – Poznan University of Technology, Poland
Tomasz SZOLC – Institute of Fundamental Technological Research, Warsaw, Poland
Oskar SZULC – Institute of Fluid-Flow Machinery, Gdansk, Poland
Rafał ŚWIERCZ – Warsaw University of Technology, Poland
Raquel TABOADA VAZQUEZ – University of Coruña, Spain
Halit TURKMEN – Istanbul Technical University, Turkey
Daniel UGURU-OKORIE – Federal University, Oye Ekiti, Nigeria
Alper UYSAL – Yildiz Technical University, Turkey
Yeqin WANG – Syndem LLC, United States
Xiaoqiong WEN – Dalian University of Technology, China
Szymon WOJCIECHOWSKI – Poznan University of Technology, Poland
Marek WOJTYRA – Warsaw University of Technology, Poland
Guenter WOZNIAK – Technische Universität Chemnitz, Germany
Guanlun WU – Shanghai Jiao Tong University, China
Xiangyu WU – University of California at Berkeley, United States
Guang XIA – Hefei University of Technology, China
Jiawei XIANG – Wenzhou University, China
Jinyang XU – Shanghai Jiao Tong University,China
Jianwei YANG – Beijing University of Civil Engineering and Architecture, China
Xiao YANG – Chongqing Technology and Business University, China
Oguzhan YILMAZ – Gazi University, Turkey
Aznifa Mahyam ZAHARUDIN – Universiti Teknologi MARA, Shah Alam, Malaysia
Zdzislaw ZATORSKI – Polish Naval Academy, Gdynia, Poland
S.H. ZHANG – Institute of Metal Research, Chinese Academy of Sciences, China
Yu ZHANG – Shenyang Jianzhu University, China
Shun-Peng ZHU – University of Electronic Science and Technology of China, Chengdu, China
Yongsheng ZHU – Xi’an Jiaotong University, China

List of reviewers of volume 68 (2021)
Ahmad ABDALLA – Huaiyin Institute of Technology, China
Sara ABDELSALAM – University of California, Riverside, United States
Muhammad Ilman Hakimi Chua ABDULLAH – Universiti Teknikal Malaysia Melaka, Malaysia
Hafiz Malik Naqash AFZAL – University of New South Wales, Sydney, Australia
Reza ANSARI – University of Guilan, Rasht, Iran
Jeewan C. ATWAL – Indian Institute of Technology Delhi, New Delhi, India
Hadi BABAEI – Islamic Azad University, Tehran, Iran
Sakthi BALAN – K. Ramakrishnan college of Engineering, Trichy, India
Leszek BARANOWSKI – Military University of Technology, Warsaw, Poland
Elias BRASSITOS – Lebanese American University, Byblos, Lebanon
Tadeusz BURCZYŃSKI – Institute of Fundamental Technological Research, Warsaw, Poland
Nguyen Duy CHINH – Hung Yen University of Technology and Education, Hung Yen, Vietnam
Dorota CHWIEDUK – Warsaw University of Technology, Poland
Adam CISZKIEWICZ – Cracow University of Technology, Poland
Meera CS – University of Petroleum and Energy Studies, Duhradun, India
Piotr CYKLIS – Cracow University of Technology, Poland
Abanti DATTA – Indian Institute of Engineering Science and Technology, Shibpur, India
Piotr DEUSZKIEWICZ – Warsaw University of Technology, Poland
Dinesh DHANDE – AISSMS College of Engineering, Pune, India
Sufen DONG – Dalian University of Technology, China
N. Godwin Raja EBENEZER – Loyola-ICAM College of Engineering and Technology, Chennai, India
Halina EGNER – Cracow University of Technology, Poland
Fehim FINDIK – Sakarya University of Applied Sciences, Turkey
Artur GANCZARSKI – Cracow University of Technology, Poland
Peng GAO – Northeastern University, Shenyang, China
Rafał GOŁĘBSKI – Czestochowa University of Technology, Poland
Andrzej GRZEBIELEC – Warsaw University of Technology, Poland
Ngoc San HA – Curtin University, Perth, Australia
Mehmet HASKUL – University of Sirnak, Turkey
Michal HATALA – Technical University of Košice, Slovak Republic
Dewey HODGES – Georgia Institute of Technology, Atlanta, United States
Hamed HONARI – Johns Hopkins University, Baltimore, United States
Olga IWASINSKA – Warsaw University of Technology, Poland
Emmanuelle JACQUET – University of Franche-Comté, Besançon, France
Maciej JAWORSKI – Warsaw University of Technology, Poland
Xiaoling JIN – Zhejiang University, Hangzhou, China
Halil Burak KAYBAL – Amasya University, Turkey
Vladis KOSSE – Queensland University of Technology, Brisbane, Australia
Krzysztof KUBRYŃSKI – Air Force Institute of Technology, Warsaw, Poland
Waldemar KUCZYŃSKI – Koszalin University of Technology, Poland
Igor KURYTNIK – State Higher School in Oswiecim, Poland
Daniel LESNIC – University of Leeds, United Kingdom
Witold LEWANDOWSKI – Gdańsk University of Technology, Poland
Guolu LI – Hebei University of Technology, Tianjin, China
Jun LI – Xi’an Jiaotong University, China
Baiquan LIN – China University of Mining and Technology, Xuzhou, China
Dawei LIU – Yanshan University, Qinhuangdao, China
Luis Norberto LÓPEZ DE LACALLE – University of the Basque Country, Bilbao, Spain
Ming LUO – Northwestern Polytechnical University, Xi’an, China
Xin MA – Shandong University, Jinan, China
Najmuldeen Yousif MAHMOOD – University of Technology, Baghdad, Iraq
Arun Kumar MAJUMDER – Indian Institute of Technology, Kharagpur, India
Paweł MALCZYK – Warsaw University of Technology, Poland
Miloš MATEJIĆ – University of Kragujevac, Serbia
Norkhairunnisa MAZLAN – Universiti Putra Malaysia, Serdang, Malaysia
Dariusz MAZURKIEWICZ – Lublin University of Technology, Poland
Florin MINGIREANU – Romanian Space Agency, Bucharest, Romania
Vladimir MITYUSHEV – Pedagogical University of Cracow, Poland
Adis MUMINOVIC – University of Sarajevo, Bosnia and Herzegovina
Baraka Olivier MUSHAGE – Université Libre des Pays des Grands Lacs, Goma, Congo (DRC)
Tomasz MUSZYŃSKI – Gdansk University of Technology, Poland
Mohamed NASR – National Research Centre, Giza, Egypt
Driss NEHARI – University of Ain Temouchent, Algeria
Oleksii NOSKO – Bialystok University of Technology, Poland
Grzegorz NOWAK – Silesian University of Technology, Gliwice, Poland
Iwona NOWAK – Silesian University of Technology, Gliwice, Poland
Samy ORABY – Pharos University in Alexandria, Egypt
Marcin PĘKAL – Warsaw University of Technology, Poland
Bo PENG – University of Huddersfield, United Kingdom
Janusz PIECHNA – Warsaw University of Technology, Poland
Maciej PIKULIŃSKI – Warsaw University of Technology, Poland
T.V.V.L.N. RAO – The LNM Institute of Information Technology, Jaipur, India
Andrzej RUSIN – Silesian University of Technology, Gliwice, Poland
Artur RUSOWICZ – Warsaw University of Technology, Poland
Benjamin SCHLEICH – Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany
Jerzy SĘK – Lodz University of Technology, Poland
Reza SERAJIAN – University of California, Merced, USA
Artem SHAKLEIN – Udmurt Federal Research Center, Izhevsk, Russia
G.L. SHI – Guangxi University of Science and Technology, Liuzhou, China
Muhammad Faheem SIDDIQUI – Vrije University, Brussels, Belgium
Jarosław SMOCZEK – AGH University of Science and Technology, Cracow, Poland
Josip STJEPANDIC – PROSTEP AG, Darmstadt, Germany
Pavel A. STRIZHAK – Tomsk Polytechnic University, Russia
Vadym STUPNYTSKYY – Lviv Polytechnic National University, Ukraine
Miklós SZAKÁLL – Johannes Gutenberg-Universität Mainz, Germany
Agnieszka TOMASZEWSKA – Gdansk University of Technology, Poland
Artur TYLISZCZAK – Czestochowa University of Technology, Poland
Aneta USTRZYCKA – Institute of Fundamental Technological Research, Warsaw, Poland
Alper UYSAL – Yildiz Technical University, Turkey
Gabriel WĘCEL – Silesian University of Technology, Gliwice, Poland
Marek WĘGLOWSKI – Welding Institute, Gliwice, Poland
Frank WILL – Technische Universität Dresden, Germany
Michał WODTKE – Gdańsk University of Technology, Poland
Marek WOJTYRA – Warsaw University of Technology, Poland
Włodzimierz WRÓBLEWSKI – Silesian University of Technology, Gliwice, Poland
Hongtao WU – Nanjing University of Aeronautics and Astronautics, China
Jinyang XU – Shanghai Jiao Tong University, China
Zhiwu XU – Harbin Institute of Technology, China
Zbigniew ZAPAŁOWICZ – West Pomeranian University of Technology, Szczecin, Poland
Zdzislaw ZATORSKI – Polish Naval Academy, Gdynia, Poland
Wanming ZHAI – Southwest Jiaotong University, Chengdu, China
Xin ZHANG – Wenzhou University of Technology, China
Su ZHAO – Ningbo Institute of Materials Technology and Engineering, China



Ta strona wykorzystuje pliki 'cookies'. Więcej informacji