Nauki Techniczne

Archives of Foundry Engineering

Zawartość

Archives of Foundry Engineering | 2022 | vol. 22 | No 2

Abstrakt

Aluminum and its alloys are one of the most favored metal-based materials for engineering applications that require lightweight materials. On the other hand, composites are getting more preferable for different kinds of applications recently. Boron nitride nanotubes (BNNTs) are one of the excellent reinforcement materials for aluminum and its alloys. To enhance mechanical properties of aluminum, BNNTs can be added with different processes. BNNT reinforced aluminum matrix composites also demonstrate extraordinary radiation shielding properties. This study consists of BNNT reinforced aluminum matrix composite production performed by casting method. Since wetting of BNNT in liquid aluminum is an obstacle for casting, various casting techniques were performed to distribute homogeneously in liquid aluminum. Different methods were investigated in an aim to incorporate BNNT into liquid method as reinforcement. It was found that UTS was increased by 20% and elongation at fracture was increased by 170% when BNNT was preheated at 800°C for 30 minutes.
Przejdź do artykułu

Autorzy i Afiliacje

B. Nemutlu
1
ORCID: ORCID
O. Kahraman
1
ORCID: ORCID
K. B. Demirel
1
ORCID: ORCID
I. Erkul
1
ORCID: ORCID
M. Cicek
1
ORCID: ORCID
H. Sahin
1
ORCID: ORCID
K.C. Dizdar
1
ORCID: ORCID
D. Dispinar
1
ORCID: ORCID

  1. Istanbul Technical University, Turkey

Abstrakt

Thermal energy encounters a huge demand in the world, part of which can be met by renewable energy sources, such as solar energy, and storage of thermal energy surplus from industrial processes. For this purpose, thermal energy storage (TES) units, in which heat is stored, are developed. The energy is accumulated by phase change materials (PCM) characterized by high phase transition enthalpy. PCMs have poor thermal conductivity; therefore, to take full advantage of their capabilities and to accelerate the charging and discharging cycle, metallic structures are used. These structures are manufactured using investment casting technology. Creating models with additive methods, such as 3D printing, allows obtaining complex shapes with high accuracy, such as thin-walled castings. At a large scale, the method may not be cost-effective. In this paper, the heat exchanger models were made from PLA and the castings - from AC44200 aluminum alloy. Investment casting requires the proper selection of parameters, such as the right material for the model, the selection of the firing temperature, the adjustment of the temperature of the molten metal, the temperature of the mold, and the pressure in it. Misaligning any of the parameters can lead to imperfections on the finished casting. Based on the model roughness study, it was found that minor roughness and higher accuracy are presented by the lower parts of the casting, while weaker performance is observed for the upper parts. Metal castings in a salt PCM environment may be subjected to corrosion. Therefore, the authors proposed to produce protective coatings on aluminum castings by the PEO method - plasma electrolytic oxidation. Porous ceramic thin films consisting mainly of alumina were obtained. The next tests will be aimed to confirm whether this layer will not negatively influence the thermal conductivity of the thermal energy storage.
Przejdź do artykułu

Autorzy i Afiliacje

N. M. Raźny
1
ORCID: ORCID

  1. Department of Lightweight Elements Engineering, Foundry and Automation, Wrocław University of Science and Technology, Wyb. Stanisława Wyspiańskiego 27, 50-370 Wrocław, Poland
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Due to the observed increase in the amount of waste in landfills, there has been an increase in the demand for products made of biomaterials and the composition of biomaterials with petroleum-derived materials. The problem of waste disposal/management also applies to waste from the casting production process with the use of disposable casting moulds made with the use of organic binders (resins), as well as residues from the process of regeneration of moulding sands. A perspective solution is to add a biodegradable component to the moulding/core sand. The authors proposed the use of polycaprolactone (PCL), a polymer from the group of aliphatic polyesters, as an additive to a casting resin commonly used in practice. As part of this study, the effect of PCL addition on the (bio) degradation of dust obtained after the process of mechanical regeneration of moulding sands with organic binders was determined. The (bio) degradation process was studied in the environment reflecting the actual environmental conditions. As part of the article, dust samples before and after the duration of the (bio) degradation process were tested for weight loss by thermogravimetry (TG) and for losses on ignition (LOI).
Przejdź do artykułu

Bibliografia

[1] Bastian, K.C., Alleman, J.E. (1996). Environmental bioassay evaluation of foundry waste residuals. Joint Transportation Research Program Technical Report Series, Purdue University, Purdue e-Pubs.
[2] Brenner, V. (2003). Biodegradace persistentních xenobiotik. Biodegradace. VI, 2003, 45-47.
[3] Sobków, D., Barton, J., Czaja, K., Sudoł, M. & Mazoń, B. (2014). Research on the resistance of materials to environmental factors. CHEMIK. 68(4), 347–354. (in Polish).
[4] Stachurek I. (2010). Biomedical systems of polyethylene oxide biodegradable in the aquatic environment. PhD thesis, Politechnika Krakowska. (in Polish).
[5] Eastman, J. (2000). Protein-based binder update: performance put to the test. Modern Casting. 90, 32-34.
[6] Kramářová, D., Brandštetr, J., Rusín, K. & Henzlová, P. (2003). Biogenic polymeric materials as binders for foundry molds and cores. Slévárenství. 60(2-3), 71-73. (in Czech).
[7] Grabowska, B., Holtzer, M., Dańko, R., Górny, M., Bobrowski, A. & Olejnik, E. (2013). New bioco binders containing biopolymers for foundry industry. Metalurgija. 52(1), 47-50.
[8] Grabowska, B., Szucki, M., Suchy, J.Sz., Eichholz, S., Hodor, K. (2013). Thermal degradation behavior of cellulose-based material for gating systems in iron casting production. Polimery. 58(1), 39-44.
[9] Major-Gabryś, K. (2016). Environmentally Friendly Foundry Moulding and Core Sands. Katowice-Gliwice, Archives of Foundry Engineering, ISBN 978-83-63605-24-7 (in Polish)
[10] Major-Gabryś, K. (2019). Environmentally Friendly Foundry Molding and Core Sands. Journal of Materials Engineering and Performance. 28(7), 3905-3911.
[11] Holtzer, M. (2001). Management of waste and by-products in foundries. Kraków: University Scientific and Didactic Publishers, AGH, Poland. (in Polish).
[12] Skrzyński, M., Dańko, R. & Czapla, P. (2014). Regeneration of used moulding sand with furfuryl resin on a laboratory stand. Archives of Foundry Engineering. 14(spec.4), 111-114. (in Polish).
[13] Dańko, R., Łucarz, M. & Dańko, J. (2014). Mechanical and mechanical-thermal regeneration of the used core sand from the cold-box process. Archives of Foundry Engineering. 14(spec.4), 21-24. (in Polish).
[14] Rui, T., Liu, J. (2010). Study of modified furan resin binder system for large steel castings. In Proceedings of 69th World Foundry Congress, 16 - 20 October 2010. Hangzhou, China, World Foundry Organization (pp. 996 – 999).
[15] Dańko, R., Holtzer, M., Dańko, J. (2015). Characteristics of dust from mechanical reclamation of moulding sand with furan cold-setting resins – impact on environment. In Proceedings of the 2015 WFO International Forum on Moulding Materials and Casting Technologies, 25 – 28 September 2015. Changsha, China. WFO Moulding Materials Commission, Foundry Institution of Chinese Mechanical Engineering Society, Productivity Center of Foundry Industry of China (38-46).
[16] Iwamoto, A. & Tokiwa, Y. (1994). Enzymatic degradation of plastics containing polycaprolactone. Polymer Degradation and Stability. 45(2), 205-213.
[17] Eastmond, G.C. (2000). Poly(ε-caprolactone) blends. Advances in Polymer Science. 149, 59-222.
[18] Gutowska, A., Michniewicz, M., Ciechańska, D. & Szalczyńska, M. (2013). Methods of testing the biodegradability of biomass materials. CHEMIK. 67(10), 945-954. (in Polish).
[19] Major-Gabryś, K., Hosadyna-Kondracka, M., Skrzyński, M., Pastirčák, R. (2020). The quality of reclaim from moulding sand with furfuryl resin and PCL additive. The abstract paper at XXVI international conference of Polish, Czech and Slovak founders: 7-9.09.2020 r. Baranów Sandomierski, Poland.
[20] Major-Gabryś, K., Hosadyna-Kondracka, M. & Stachurek, I. (2020). Determination of mass loss in samples of post-regeneration dust from moulding sands with and without PCL subjected to biodegradation processes in a water environment. Journal of Applied Materials Engineering. 60(4), 121-129.
Przejdź do artykułu

Autorzy i Afiliacje

K. Major-Gabryś
1
ORCID: ORCID
I. Stachurek
2
ORCID: ORCID
M. Hosadyna-Kondracka
2
ORCID: ORCID

  1. AGH University of Science and Technology, Faculty of Foundry Engineering, Mickiewicza 30, 30-059 Cracow, Poland
  2. ŁUKASIEWICZ Research Network - Foundry Research Institute, Zakopianska 73, 30-418 Cracow, Poland
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Hot tearing is a casting defect responsible for external and internal cracks on casting products. This irregular undesired formation is often observed during solidification and freezing. The solidification of molten metal also causes thermal contraction and shrinkage, indicating the occurrence of hot tearing when the alloy is restrained by the mould design. The parameters affecting this process include the pouring and mould temperatures, the chemical composition of the alloy, and the mould shape. Also, the factors affecting hot tearing susceptibility include pouring and mould temperatures, the grain refiner, as well as pouring speed. There are many methods of measuring the level of susceptibility to hot tearing, one of which is the thermal contraction evaluation during metal solidification, observed in cast products through several mould types. This paper discusses the hot tearing overview, the effect of pouring temperature, mould temperature, grain refiner, pouring speed on hot tearing, the type of mould, and criterion for hot tear observation.
Przejdź do artykułu

Bibliografia

[1] Li, S. & Apelian, D. (2011). Hot Tearing of aluminum alloy: a critical literature review. International Journal of Metalcasting. 5(1), 23-40.
[2] Kumar, V.M. & Devi, C.N. (2014). Evaluation of mechanical characteristics for aluminum-copper metal matrix composite. Research Journal of Engineering Sciences. 3(3), 1-5.
[3] Briggs, C.W. & Gezelius, R.A. (1934). Studies on solidification and contraction in steel castings II-Free and hindered contraction of cast carbon steel. AFA Trans. 42, 449-476.
[4] Körber, F. & Schitzkowski, G. (1928). Determination of the contraction of cast steel. Stahl Und Eisen. 15, 128-135.
[5] Verö, J. (1936). The hot-shortness of aluminum alloys. The Metals Industry. 48, 431-434.
[6] Pumphrey, W.I. & Jennings, P.H. (1948). A consideration of the nature of brittleness at temperature above the solidus in castings and welds in aluminum alloys. Journal of Institute of Metals. 75, 235.
[7] Pellini, W.S. (1952). Strain theory of hot tearing. Foundry. 80, 125-199.
[8] Rosenberg, R.A. Flemings, M.C. & Taylor, H.F. (1960). Nonferrous binary alloys hot tearing. AFS Transactions. 69, 518-528.
[9] Saveiko, V.N. (1961). Theory of hot tearing. Russian Castings Production. 11, 453-456.
[10] Metz, S.A. & Flemings, M.C. (1970) A fundamental study of hot tearing. AFS Transactions. 78, 453-460.
[11] Clyne, T.W. & Davies, G.J. (1975). A quantitive solidification test for casting and an evaluation of cracking in aluminium-magnesium alloys. The British Foundryman. 68(9), 238-238.
[12] Campbell, J. (1991). Castings. Oxford: Butterworth-Heinemann.
[13] Sigworth, G.K. (1996). Hot tearing of metals. AFS Transactions. 104, 1053-1062.
[14] Davidson, C., Viano, D., Lu, L., & Stjohn, D. (2006). Observation of crack initiation during hot tearing. International Journal of Cast Metals Research. 19, 59-65.
[15] Singer, K., Benek, H. (1931). Contribution to hot tears in steel castings. Stahl and Sisen. 51, 61-65.
[16] Middleton, J.M. & Protheroe, H.T. (1951). The hot-tearing of steel. Journal of the Iron and Steel Institute. 168, 384-397.
[17] Bichler, L., Elsayed, A., Lee, K. & Ravindran, C. (2008). Influence of mold and pouring temperatures on hot tearing susceptibility of AZ91D magnesium alloy. International Journal of Metalcasting. 2(1), 43-54.
[18] Couture, A. & Edwards, J.O. (1996) The hot-tearing of copper-base casting alloys. AFS Transactions, 74, 709-721.
[19] Karunakar, D.B., Rai, R.N., Patra, S. & Datta, G.L. (2009). Effects of grain refinement and residual elements on hot tearing in aluminum castings. The International Journal of Advance Manufacturing Technology. 45, 851-858.
[20] Nasresfahani M.R. & Niroumand, B. (2010). Design of a new hot tearing test apparatus and modification of its operation. Metals and Materials International. 16(1), 35-38.
[21] Burapa, R., Rawangwong, S., Chatthong, J. & Boonchouytan, W. (2013). Effects of mold temperature and casting temperature on hot cracking in Al-4.5 wt.% Cu alloy. Advanced Materials Research. 747, 623-626 doi: 10.4028/www.scientific.net/AMR.747.623.
[22] He, Y., Li, S., Sadayappan, K. & Apelian, D. (2013). Thermomechanical simulation and experimental characterisation of hot tearing during solidification of aluminium alloys. International Journal of Cast Metals Research. 26(2).
[23] Huang, H., Fu, P., Wang, Y., Peng, L. & Jiang, H. (2014). Effect of pouring and mold temperatures on hot tearing susceptibility of AZ91D and Mg–3Nd–0.2Zn–Zr Mg alloys. Transactions of Nonferrous Metals Society of China. 24(4), 922-929.
[24] Hasan, A. & Suyitno (2015). Effect pouring temperature on casting defect susceptibility of hot tearing in metal alloy Al-Si. Applied Mechanics and Materials. 758, 95-99.
[25] Birru, A.K. & Karunakar, D.B. (2016). Effects of grain refinement and residual elements on hot tearing of A713 aluminium cast alloy. Transactions of Nonferrous Metals Society of China. 26, 1783-1790.
[26] Apelian, D. (2009). Aluminium cast alloys: enabling tools for improved performance. NADCA.
[27] Spittle, J.A. & Cushway, A.A. (1983). Influence of superheat and grain structure on hot-tearing susceptibilities of Al-Cu alloy castings. Metals Technology. 10(1), 6-13.
[28] Limmaneevichitr, C., Saisiang, A. & Chanpum, S. (2002). The role of grain refinement on hot crack susceptibility of aluminum alloy permanent mold castings. Proceedings of the 65th World Foundry Congress.
[29] Sadayappan, M., Sahoo, M. & Weiss, D. (2007). Evaluation of the hot tear susceptibility of selected magnesium casting alloys in permanent molds. AFS Transactions. 115, 761-766.
[30] Fasoyinu, Y., Sahoo, M. & Sikorski, S. (2008). Hot tearing of aluminum alloys 206 and 535 poured in metal mold. Proceedings of the AFS 6th International Conference on Permanent Mold Casting of Aluminum and Magnesium. 11-25.
[31] Zhen, Z., Hort, N., Utke, O., Huang, Y., Petri, N. & Kainer, K.U. (2009). Investigations on hot tearing of Mg-Al binary alloys by using a new quantitative method. Magnesium Technology.
[32] Pokorny, M.G., Monroe, C.A. & Beckermann, C. (2009). Prediction of deformation and hot tear formation using a viscoplastic model with damage. The minerals. Metal and Materials Society. 198-198.
[33] Nabawy, A.M. Samuel, A.M., Samuel, F.H. & Doty, H.W. (2012). Influence of additions of Zr, Ti–B, Sr, and Si as well as of mold temperature on the hot-tearing susceptibility of an experimental Al–2% Cu–1% Si alloy. Journal of Materials Science. 47(9), 4146-4158.
[34] Srinivasan, A., Wang, Z., Huang, Y., Beckmann, F., Kainer, K.U. & Hort, N. (2013). Hot tearing characteristics of binary Mg-Gd alloy castings. Metallurgical and Materials Transactions A. 44(5), 2285-2298.
[35] Wang, Z., Huang, Y., Srinivasan, A., Liu, Z., Beckkmann, F., Kainer K.U. & Hort, N. (2014). Experimental and numerical analysis of hot tearing susceptibility for Mg–Y alloys. Journal of Materials Science. 49, 353-362.
[36] D’Elia, F., Ravindran, C., Sediako, D., Kainer, K.U. & N.Hort. (2014). Hot tearing mechanisms of B206 aluminum–copper alloy. Materials & Design. 64, 44-55.
[37] Easton, M., StJohn, D.H. & Sweet, L. (2009). Grain refinement and hot tearing of aluminium alloys - how to optimise and minimise. Material Science Forum. 630, 213–221. https://doi.org/10.4028/www.scientific.net/msf.630.213.
[38] Elsayed, A., Ravindran, C. & Murty, B.S. (2011). Effect of Al-Ti-B based master alloys on grain refinement and hot tearing susceptibility of AZ91E magnesium alloy. Materials Science Forum. 690, 351–354.
[39] Choi, H., Cho, W., Konishi, H., Kou, S. & Li, X. (2012). Nanoparticle-induced superior hot tearing resistance of A206 alloy. Metallurgical and Materials Transactions A, 44(4), 1897-1907.
[40] Sweet, L., Easton, M.A., Taylor, J.A., Grandfield, J.F., Davidson, C.J., Lu, L., Couper, M.J. & StJohn, D.H. (2012). Hot tear susceptibility of Al-Mg-Si-Fe alloys with varying iron contents. Metallurgical and Materials Transactions A. 44(12), 396-5407.
[41] Suyitno, Savran, V.I., Katgerman, L. & Eskin, D.G. (2004). Effects of alloy composition and casting speed on structure formation and hot tearing during direct-chill casting of Al-Cu alloys. Metallurgical and Materials Transactions A. 35A, 3551–3561.
[42] Bozorgi, S., Haberl, K., Kneissl, C., Pabel, T. & Schumacher, P. (2011). Effect of alloying elements (magnesium and copper) on hot cracking susceptibility of AlSi7MgCu-Alloys. In Tiryakioğlu, M., Campbell, J., and Crepeau, P.N. (eds.) Shape Casting: The 4th International Symposium. Wiley.
[43] Malau, V., Akhyar, H., , Iswanto, P.T. (2018). Modification of constrained rod casting mold for new hot tearing measurement. 63(3), 1201-1208. DOI 10.24425/123792.
[44] Gowri, S. & Bouchard, M. (1994). Hot cracking in aluminium alloys-part 1. Literature survey. Research Report. Université du Québec à Chicoutimi.
[45] Pekguleryuz, M.O., Li, X., & Aliravci, C.A. (2009). In-situ investigation of hot tearing in aluminum alloy AA1050 via acoustic emission and cooling curve analysis. Metallurgical and Materials Transactions A. 40(6), 1436-1456.
[46] Purvis, A.L., Kannatey-Asibu, E. & Pehlke, R.D. (1990). Evaluation of acoustic emission from issand cast alloy 319 during solidification and formation of casting defects. AFS Transactions. 98, l-7.
[47] Purvis, A.L., Kannatey-Asibu, E. & Pehlke, R.D. (1991). Acoustic emission signal characteristics from casting defects formed during solidification of Al alloy 319. AFS Transactions. 102, 525-530.
[48] Birru, A.K., Karunakar, D.B. & Mahapatra, M.M. (2012). A study on hot tearing susceptibility of Al–Cu, Al–Mg, and Al–Zn alloys. Transactions of the Indian Institute of Metals. 65(1), 97–105.
[49] Singer, A.R.E. & Jennings, P.H. (1946). Hot-shortness of the aluminium-1043 silicon alloys of commercial purity. Journal of Institute of Metals. 72, 197-211.
[50] Gamber, E.J. (1959). Hot cracking test for light metal casting alloys. Trans. AFS. 67, 237-237.
[51] Lemieux, A., Langlais, J. & Chen, X. (2013). Reduction of hot tearing of cast semi-solid 206 alloys. Solid State Phenomena. 193, 101-106.
[52] Novikov, I.I. (1966). Hot shortness of non-ferrous metals and alloys. Moscow, Nauka, 299. (in Russian)
[53] Zych, J., Myszka, M., Snopkiewicz, T. (2017). Hot cracking tendency of non-ferrous alloys - a new test method. W Nauka i Technologia 2017 – Odlewnictwo Metali Nieżelaznych, 199-212. Kraków: Wydawnictwo Naukowe „Akapit”. (in Polish).
[54] Oya, S., Honma, U., Fujii, T. & Othaki, M. (1984). Evaluation of hot tearing in binary Al-Si alloy castings. Aluminium. 60(20), 777.
[55] Warrington, D. & McCartney, D.G. (1989). Development of a new hot-cracking test for aluminum alloys. Cast Metals. 2, 134.
[56] Lin, S., Aliravci, C. & Pekguleryuz, M.O. (2007). Hot-tear susceptibility of aluminum wrought alloys and the effect of grain refining. Metallurgical and Materials Transactions A. 38(5), 1056-1068.
[57] Cao, G. & Kou, S. (2006). Hot cracking of binary Mg–Al alloy castings. Materials Science and Engineering: A. 417 (1-2), 230-238.
[58] Wannasin, J., Schwam, D., Yurko, J.A., Rohloff, C. & Woycik, G. (2006). Hot tearing susceptibility and fluidity of semi-solid gravity cast Al-Cu alloy. Solid State Phenomena. 116-117, 76-79.
[59] Lin, S., Aliravci, C. & Pekguleryuz, M.O. (2007). Hot-tear susceptibility of aluminum wrought alloys and the effect of grain refining. Metallurgical and Materials Transactions A. 38(5), 1056-1068.
[60] Guo, J. & Zhu, J.Z. (2007). Prediction of hot tearing during alloy solidification. In the 5th Decennial International Conference on Solidification Processing. Columbia. USA, 549-553.
[61] Kamga, H.K., Larouche, D., Bournane, M. & Rahem, A. (2010). Hot tearing of aluminum–copper B206 alloys with iron and silicon additions. Materials Science and Engineering: A. 527(27-28), 7413-7423.
[62] Cao, G., Zhang, C., Cao, H., Chang, Y.A. & Kou, S. (2010). Hot-tearing susceptibility of ternary Mg-Al-Sr alloy castings. Metallurgical and Materials Transactions A. 41(3), 706-716.
[63] D’Elia, F., Ravindran, C., Sediako, D., Kainer, K.U. & Hort, N. (2014). Hot tearing mechanisms of B206 aluminum–copper alloy. Materials & Design. 64, 44-55, https://doi.org/10.1016/j.matdes.2014.07.024.
[64] Bichler, L. & Ravindran, C. (2010). New developments in assessing hot tearing in magnesium alloy castings. Materials and Design. 31, 17-23.
[65] Li, S. (2010). Hot Tearing in cast aluminum alloys: measures and effects of process variables. Worcester Polytechnic Institute. 24-24.
[66] Myszka, M., Zych, J. & Snopkiewicz, T. (2018). Hot cracking tendency of foundry alloys – an innovative testing method. Prace Instytutu Odlewnictwa Transactions of the Foundry Research Institute. 58(4), 235-249. DOI: 10.7356/iod.2018.19.
[67] Monroe, C. & Beckermann, C. (2004). Development of a hot tear indicator for steel castings. In The 58th SFSA Technical and Operating Conference. Chicago, America, 1-13.
[68] Monroe, C. & Beckermann, C. (2005). Development of a hot tear indicator for steel castings. Materials Science and Engineering A. 413-414(3), 30-36.
[69] Monroe, C.A., Beckermann, C. & Klinkhammer, J. (2009). Simulation of deformation and hot tear formation using a visco-plastic model with damage, in book cockcroft, S.L, & Maijer, D.M., eds. modeling of casting, Welding, and Advanced Solidification Processes-XII. TSM (The Minerals, Metals & Materials Society). 313-320.
[70] Nasresfahani, M.R. & Niroumand, B. (2014). A new criterion for prediction of hot tearing susceptibility of cast alloys. Metallurgical and Materials Transactions A. 45(9), 3699-3702.
[71] Nasresfahani, M.R. & Rajabloo, M.J. (2014). Research on the effect of pouring temperature on hot-tear susceptibility of A206 alloy by simulation. Metallurgical and Materials Transactions B. 45(5), 1827-1833.
[72] Li, S., Sadayappan, K. & Apelian, D. (2013). Role of grain refinement in the hot tearing of cast Al-Cu alloy. Metallurgical and Materials Transactions B. 44(3), 614-623.
[73] Olivier, C., Yvan, C. & Michel, B. (2008). Hot tearing in steels during solidification: experimental characterization and thermomechanical modeling. Journal of Engineering Materials and Technology. 130(2), 021018.
[74] Bellet, M., Cerri, O., Bobadilla, M. & Chastel, Y. (2009). Modeling hot tearing during solidification of steels: assessment and improvement of macroscopic criteria through the analysis of two experimental tests. Metallurgical and Materials Transactions A. 40(11), 2705-2717.
[75] Srinivasan, A., Wang, Z., Huang, Y., Beckmann, F., Kainer, K.U. & Hort, N. (2013). Hot tearing characteristics of binary Mg-Gd alloy castings. Metallurgical and Materials Transactions A. 44(5), 2285-2298.
[76] Wang, Z., Huang, Y., Srinivasan, A., Liu, Z., Beckmann, F., Kainer, K.U. & Hort, N. (2013). Hot tearing susceptibility of binary Mg–Y alloy castings. Materials and Design. 47, 90-100.
[77] Srinivasan, A., Wang, Z., Huang, Y., Beckmann, F., Kainer, K.U. & Hort, N. (2013) Hot tearing characteristics of binary Mg-Gd alloy castings. Metallurgical and Materials Transactions A. 44(5), 2285-2298.
[78] Liu, Z., Zhang, S., Mao, P. & Wang, F. (2014). Effects of Y on hot tearing susceptibility of Mg–Zn–Y–Zr alloys. Transactions of Nonferrous Metals Society of China. 24(4), 907-914.
[79] Akhyar, H. & Husaini (2016). Study on cooling curve behavior during solidification and investigation of impact strength and hardness of recycled Al–Zn aluminum alloy. International Journal of Metalcasting. 10(4), 452-456. https://doi.org/10.1007/s40962-016-0024-8.
[80] Clyne, B. & Davies, G.J. (1981). The influence of composition on solidification cracking susceptibility in binary alloy systems. J. Brit Foundryman. 74, 65-73.
[81] Instone, S. (1999). The effect of alloy composition and microstructure on the hot cracking of vertical direct chill cast aluminium alloy billet. University of Queensland.
[82] Davidson, C., Viano, D., Lu, L., D.H.S. (2005). Shape Casting, 7th International Symposium Celebrating Prof. John Campbell's 80th Birthday.
[83] Mitchell, J.B. Cockcroft, S.L., Viano, D., Davidson, C. & StJohn, D. (2007). Determination of strain during hot tearing by image correlation. Metallurgical and Materials Transactions A. 38(10), 2503-2512.
[84] Easton, M.A., Wang, H., Grandfield, J., Davidson, C.J., StJohn, D.H., Sweet, L.D. & Couper, M.J. (2012). Observation and prediction of the hot tear susceptibility of ternary Al-Si-Mg alloys. Metallurgical and Materials Transactions A. 43(9), 3227-3238.
[85] Li, M., Wang, H., Wei, Z. & Zhu, Z. (2010). The effect of Y on the hot-tearing resistance of Al–5 wt.% Cu based alloy. Materials and Design. 31(5), 2483-2487. https://doi.org/10.1016/j.matdes.2009.11.044.
[86] Knuutinen A., Nogita K., Mcdonald S.D. & Dahle A.K. (2001) Modification of Al–Si alloys with Ba, Ca, Y and Yb. Journal of Light Metals. 229-240.
[87] Murashima, I., Asada, J. & Yoshida, M., (2008). Effect of grain refiner and grain size on the susceptibility of Al – Mg die casting alloy to cracking during solidification. Journal of Materials Processing Technology. 209, 210-219.
[88] Xu, R., Zheng, H., Luo, J., Ding, S., Zhang, S. & Tian, X. (2014). Role of tensile forces in hot tearing formation of cast Al-Si alloy. Transactions of Nonferrous Metals Society of China. 24(7), 2203-2207.
[89] Zhang, J. & Singer, R.F. (2004).Effect of grain-boundary characteristics on castability of nickel-base superalloys. Metallurgical and Materials Transactions. A. 35, 939-946.
[90] Zhou, Y., Volek, A. & Singer, R.F. (2005). Influence of solidification conditions on the castability of nickel-base superalloy IN792. Metallurgical and Materials Transactions A. 36, 651-656.
[91] Zhou, Y., Volek, A. & Singer, R.F. (2006). Effect of grain boundary characteristics on hot tearing in directional solidification of superalloys. Journal of Materials Research. 21(09), 2361-2370.
[92] Zhou, Y. & Volek, A. (2008). Effect of carbon additions on hot tearing of a second generation nickel-base superalloy. Materials Science and Engineering: A. 479(1-2), 324-332.
[93] Phillion, A.B., Hamilton, R.W., Fuloria, D., Leung, A.C.L., Rockett, P., Connolley, T. & Lee, P.D. (2011). In situ X-ray observation of semi-solid deformation and failure in Al–Cu alloys. Acta Materialia. 59, 1436-1444.
[94] Akhyar, H., Malau, V., Suyitno & Iswanto, P.T. (2017). Hot tearing susceptibility of aluminum alloys using CRCM-Horizontal mold. Results in Physics. 7, 1030-1039. https://doi.org/10.1016/j.rinp.2017.02.041.
[95] Clyne, G.J. & Davies, T.W. (1979). Solidification and Casting of Metals. London: Metals Society. 275-278.
[96] Suyitno, Kool, W. H., Katgerman, L., (2005). Hot Tearing Criteria Evaluation for Direct-Chill Casting of an Al-4.5 Pct Cu Alloy. Metallurgical and Materials Transactions A. 36A, 1537-1546.
[97] Katgerman, L. (1982). A mathematical model for hot cracking of aluminum alloys during D.C. casting. JOM Journal of the Minerals Metals & Materials Society. 34, 46-49. https://doi.org/10.1007/BF03339110.
[98] Magnin, B., Maenner, L., Katgerman, L. & Engler, S. (1996). Ductility and theology of an Al-4.5%Cu alloy from room temperature to coherency temperature. Mater Science Forum. 1209, 217-222.
[99] Eskin, D.G., Suyitno & Katgerman, L. (2004). Mechanical properties in the semi-solid state and hot tearing of aluminum alloys. Progress in Materials Science. 49, 629-711.
[100] Prokhorov, N.N. (1962). Resistance to hot tearing of cast metals during solidification. Russian Castings Production. 2, 172-175.
[101] Rappaz, M., Drezet, J.M. & Gremaud, M. (1999). A new hot-tearing criterion. Metallurgical and Materials Transactions A. 30A, 449-455.
[102] Braccini, M., Martin, C. L., Suéry, M. & Bréchet, Y. (2000). Modeling of casting. Welding and Advanced Solidification Processes IX. 18-24.
[103] Eskin, D.G. & Katgerman, L. (2007). A quest for a new hot tearing criterion. Metallurgical and Materials Transactions A. 38A, 1511- 1519, DOI: 10.1007/s11661-007-9169-7.
[104] Hamdi, M.M., Mo, A. & Fjær, H.G. (2006). TearSim : A two-phase model addressing hot tearing formation during aluminum direct chill casting. Metallurgical and Materials Transactions A. 37, 3069-3083.
[105] Monroe, C. & Beckermann, C. (2014). Prediction of hot tearing using a dimensionless niyama criterion. The Journal of The Minerals. 66(8), 1439-1445.
[106] Aguiar, A.M. (2020). Hot tearing susceptibility of single-phase Al-3.8 wt%Zn-1 wt%Mg alloy using the constrained rod solidification experiment: influence of 1.2 wt%Fe addition and grain refinement. Thesis, McMaster University. Hamilton, Ontario.

Przejdź do artykułu

Autorzy i Afiliacje

Akhyar
1

  1. Department of Mechanical Engineering, Univeritas Syiah Kuala, Jl. Syech Aburrauf No.7, Darussalam, Banda Aceh, 23111, Indonesia
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The article presents the results of research on the abrasion resistance of cast iron with vermicular graphite in the as-cast state and after austempering (the latter material is referred to as AVGI – Austempered Vermicular Graphite Iron). Austenitization was carried out at the temperature values of either 900°C or 960°C, and austempering at the temperature values of either 290°C and or 390°C. Both the austenitization and the austempering time was equal to 90 minutes. The change of the pearlitic-ferritic matrix to the ausferritic one resulted in an increase in mechanical properties. Abrasion tests were conducted by means of the T-01M pin-on-disc tribometer. The counter-sample (i.e. the disc) was made of the JT6500 friction material. Each sample was subject to abrasion over a sliding distance of 4000 m. The weight losses of both samples and counter-samples were determined by the gravimetric method. It was found that the vermicular cast iron austenitized at 900°C and austempered at 290°C was characterized by the lowest wear among the evaluated cast iron types. The geometric structure of the surface layer after the dry friction test exhibited irregular noticeable grooves, distinct oriented abrasion traces, plastic flow of the material, microcracks, and pits generated by tearing out the abraded material. The largest surface roughness was found for the AVGI cast iron heat-treated according to the variant 3 (Tγ =900 ºC; Tpi = 390°C), while the smallest one occurred in AVGI cast iron subject to either the variant 2 (Tγ =960 ºC; Tpi = 290°C) or the variant 4 (Tγ =900 ºC; Tpi = 290°C) of heat treatment and was equal to either 2.5 μm or 2.66 μm, respectively. It can be seen that the surface roughness decreases with the decrease in the austempering temperature.
Przejdź do artykułu

Bibliografia

[1] Hebda, M., Wachal, A. (1980). Tribology. Warsaw: Ed. Scientific and Technical Publishers.
[2] Hebda, M. (2007). Processes of friction, lubrication and wear of machines. Warsaw – Radom: Ed. Institute of Sustainable Technologies - PIB.
[3] Podrzucki, C. (1991). Cast iron. Structure, properties, application. vol. 1 and 2. Krakow: Ed. ZG STOP. (in Polish).
[4] Kopyciński, D., Kawalec, M., et al. (2013). Analysis of the structure and abrasive wear resistance of white cast iron with precipitates of carbides. Archives of Metallurgy and Materials. 58(3), 973-976.
[5] Szajnar, J., Walasek, A. & Baron, C. (2013). Tribological and corrosive properties of the parts of machines with surface alloy layer. Archives of Metallurgy and Materials. 58(3), 931-936.
[6] Kovac, P., Jesic, D., Sovilj-Nikic, S., et al. (2018). Energy aspects of tribological behaviour of nodular cast iron. Journal of Environmental Protection and Ecology. 19(1), 163-172.
[7] Cabanne, P., Forrest, R., Roedter, H. (2006). Sorelmetal about nodular cast iron. Warsaw: Metals & Minerals Ltd.
[8] Gumienny, G. (2013). Effect of carbides and matrix type on wear resistance of nodular cast iron. Archives of Foundry Engineering. 13(3), 25-29.
[9] Jeyaprakash, N., Sivasankaran, S., Prabu G., Yang, Che-Hua, & Alaboodi Abdulaziz S. (2019). Enhancing the tribological properties of nodular cast iron using multi wall carbon nano-tubes (MWCNTs) as lubricant additives. Materials Research Express. 6(4). DOI: https://doi.org/10.1088/2053-1591/aafce9
[10] Wojciechowski A., Sobczak J. (2001) Composite brake discs for road vehicles. Warsaw: Motor Transport Institute.
[11] Guzik, E. (2001). Cast iron refining processes. Selected Issues. Archive of Foundry. Monograph No. 1M, 2001. Ed. PAN.
[12] Duenas, J.R., Hormaza, W. & CastroGüiza, G.M. (2019). Abrasion resistance and toughness of a ductile ironproduced by two molding processes with a shortaustempering. Journal of Materials Research and Technology. 8(3), 2605-2612.
[13] Han, J.M., Zou, Q., Barber, G.C. & et al. (2012). Study of the effects of austempering temperature and time on scuffing behavior of austempered Ni–Mo–Cu ductile iron. Wear. 290-291, 99-105
[14] Du, Y., Gao, X., Wang, X. & et al. (2020). Tribological behavior of austempered ductile iron (ADI) obtained at different austempering temperatures. Wear. 456-457(203396), 1-12. DOI: 10.1016/j.wear.2020.203396
[15] Kochański, A., Krzyńska, A., Chmielewski, T. & Stoliński, A. (2015). Comparison of austempered ductile iron and manganese steel wearability. Archives of Foundry Engineering. 15(spec.1), 51-54.
[16] Myszka, D. (2005). Microstructure and surface properties of ADI cast iron. Archives of Foundry. 5(15), 278-283.
[17] Kumari, R., Rao, P. (2009). Study od’s wear behaviour of austempered ductile iron. Journal of Materials Research. 44, 1082-1093.
[18] Medyński, D. & Janus, A. (2018). Abrasive – wear resistance of austenitic cast iron. Archives of Foundry Engineering. 18(3), 43-48.
[19] Pytel, A. & Gazda, A. (2014). Evaluation of selected properties in austempered vermicular cast iron (AVCI). Works of the Foundry Research Institute. LIV(4), 23-31.
[20] Panneerselvama, S., Martis, C.J., Putatunda, S. K. & Boileau, J. M. (2015). An investigation on the stability of austenite in Austempered Ductile Cast Iron (ADI). Materials Science and Engineering: A. 625, 237-246.
[21] Kim, Y., Shin, H., Park, H. & Lim, J. (2008). Investigation into mechanical properties of austempered ductile cast iron (ADI) in accordance with austempering temperaturę. Materials Letters. 62(3), 357-360.
[22] Krzyńska, A. (2013). Searching for better properties of ADI. Archives of Foundry Engineering. 13(spec.1), 91-96.
[23] Krzyńska, A. & Kochański, A. (2014). Austenitization of Ferritic Ductil Iron. Archives of Foundry Engineering. 14(4), 49-54.
[24] Wilk-Kołodziejczyk, D., Mrzygłód, B., Regulski, K. & et al. (2016). Influence of process parameters on the properties of austempered ductile iron (ADI) examined with the use of data mining methods. Metalurgija. 55(4), 849-851.
[25] Khalaj, G., Pouraliakbary, H., Mamaghaniz, K. R. & et al. (2013). Modeling the correlation between heat treatment, chemical composition and bainite fraction of pipeline steels by means of artifcial neural networks. Neural Network World. 23, 351-367.
[26] Kiahosseini, S. R., Baygi, S., J., M., Khalaj, G. & et al. (2017). a study on structural, corrosion, and sensitization behavior of ultrafine and coarse grain 316 stainless steel processed by multiaxial forging and heat treatment. Journal of Materials Engineering and Performance. 27, 271-281.
[27] Polish Standard PN-EN 1563, Founding. Spheroidal graphite cast iron, (2000).
[28] Polish Standard PN-EN ISO 945-1: Microstructure of cast irons. Part 1. Graphite classification by visual analysis. November 2009. Correction PN-EN ISO 945-1:2009/AC. April 2010.
[29] Polish Standard PN-75/H-04661: Grey cast iron, nodular cast iron and malleable. Metallographic examinations. Determining of microstructure.
[30] Soiński, M.S., Jakubus, A. (2014). Initial assessment of abrasive wear resistance of austempered cast iron with vermicular graphite. Archives of Metallurgy and Materials. 59(3), 1073-1076.
[31] Kaczorowski, M. (2001). Structure and mechanical properties of ADI cast iron. Archive of Foundry. 1(1/2), 149-158.
[32] Myszka, D., Kaczorowski, M., Tybulczuk, J. & Kowalski, A. (2004). Parameters of the ADI cast iron production process and its mechanical properties. Archive of Foundry. 4(11), 355-364.
[33] Binczyk F., Gradoń P. (2010). Influence of heat treatment parameters on the formation of ADI cast iron microstructure. The work of IMŻ. 4, 5-14.
[34] Pietrowski, S. (1997). Ductile iron with the structure of bainitic ferrite with austenite or bainitic ferrite. Archives of Materials Science. 18, 253-273.
[35] Borowski, A.W. (1998). Synthetic ductile iron quenched with isothermal transformation (ADI). XXIII Scientific and Technical Symposium of the Foundry Engineering ITMat. Warsaw University of Technology, pp. 29.
[36] Wróbel, J. (2013). Cast iron thermal fatigue resistance ADI. Crakow: PhD thesis. AGH.
[37] Mierzwa, P. (2010). The effect of thermal treatment on the selected properties of cast iron with vermicular graphite. Doctoral thesis. Czestochowa University of Technology.
[38] Institute of Sustainable Technologies. User manual. Tribology set T-01M, mandrel-disc type. State Research Institute. Radom 2010.
[39] makland.com.pl. 28.02.2016, time 13.25.

Przejdź do artykułu

Autorzy i Afiliacje

A. Jakubus
1
ORCID: ORCID

  1. The Jacob of Paradies University in Gorzów Wielkopolski, ul. Teatralna 25, 66-400 Gorzów Wielkopolski, Poland
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The European Commission's ambitious plan to reduce CO2 emissions has a significant impact on the global automotive industry. Recent development of new diesel and petrol engines with direct injection is aimed at improving fuel efficiency while maintaining (or enhancing) engine performance. This naturally also increases the demands on the properties of the most stressed engine components (e.g., cylinder heads, engine blocks, pistons), which leads to the development of new materials. Presented work analysed the effect of different mold temperatures (60; 120; 180 °C) on mechanical, physical properties and microstructure of AlSi5Cu2Mg aluminium alloy. This alloy is currently being used for the production of cylinder head castings. The results showed that the changing mold temperature had an effect on mechanical properties (ultimate tensile strength and Young modulus values). SEM with EDX analysis of intermetallic phases revealed there were no size and morphology changes of Cu, Mg and Fe intermetallic phases when the mold temperature changed. No significant effect of different mold temperature on physical properties (thermal and electrical conductivity) and fracture mechanism occurred during experiment. Optimal combination of mechanical and physical properties of AlSi5Cu2Mg alloy was achieved using a permanent mold with temperature ranging from 120 to 180 °C.
Przejdź do artykułu

Bibliografia

[1] Skrabulakova, E.F, Ivanova, M., Rosova, A., Gresova, E., Sofranko, M. & Ferencz, V. (2021). On electromobility development and the calculation of the infrastructural country electromobility coefficient. Processes. 9(2), 1-28. DOI: 10.3390/pr9020222.
[2] Murthy, V. & Girish, K. (2021). A comprehensive review of battery technology for E-mobility. Journal of the Indian chemical society. 98(10), 100173 DOI: 10.1016/j.jics.2021.100173.
[3] Trovao, J. (2021). Electromobility innovation trends [automotive electronics]. IEEE vehicular technology magazine. 16(3), 153-161. DOI: 10.1109/MVT.2021.3091798.
[4] Venticinque, S., Martino, B., Aversa, R., Natvig, M., Jiang, S. & Sard, R. (2021). Evaluation of innovative solutions for e-mobility. International journal of grid and utility computing. 12(2), 159-172. DOI: 10.1504/IJGUC.2021.114829.
[5] Hajdúch, P., Djurdjevic, M. B. & Bolibruchová, D. (2020). New trends in the production of aluminum castings for the automotive industry. Slévarenství. 1-2, 5-7.
[6] Hoag, K. & Dondlinger, B. (2016). Cylinder block and head materials and manufacturing. In Kevin Hoag & Brian Dondlinger (Eds.), Vehicular engine design (pp. 97-115). Springer, Vienna. DOI: 10.1007/978-3-7091-1859-77.
[7] Kores, S., Zak, H. & Tonn, B. (2008). Aluminium alloys for cylinder heads. Materials and Geoenvironment. 55, 307-317.
[8] Podprocká, R. & Bolibruchová, D. (2017). Iron intermetallic phases in the alloy based on Al-Si-Mg by applying manganese. Archives of Foundry Engineering. 17(3), 217-221. DOI: 10.1515/afe-2017-0118.
[9] Vincze, F., Tokár, M., Gegyverneki, G. & Gyarmati, G. (2020). Examination of the eutectic modifying effect of Sr on an Al-Si-Mg-Cu alloy using various technological parameters. Archives of Foundry Engineering. 20(3), 79-84. 10.24425/afe.2020.133334
[10] Djurdjevič, M.B., Vicario, I. & Huber, G. (2014). Review of thermal analysis applications in aluminium casting plants. Revista de Metalurgia. 50(1), 1-12. DOI: 10.3989/revmetalm.004
[11] Canales, A., Silva, J., Gloria, D. & Colar, R. (2010). Thermal analysis during solidification of cast Al-Si alloys. Thermochimica Acta. 510(1-2), 82-87. DOI: 10.1016/j.tca.2010.06.026.
[12] Tillová, E., Chalupová, M. (2009). Structural analysis of Al-Si alloys. Žilina: EDIS – vydavateľstvo ŽU.

Przejdź do artykułu

Autorzy i Afiliacje

L. Širanec
1
ORCID: ORCID
D. Bolibruchová
1
ORCID: ORCID
M. Chalupová
1
ORCID: ORCID

  1. Department of Technological Engineering, Faculty of Mechanical Engineering, University of Žilina, Slovakia
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The method of the ongoing assessment of the reclaim quality originating from the mechanical reclamation is described in this paper. In the process, the triboelectric system of measuring amounts of dust in the dedusting part of a reclamation device was applied. Based on the online measurements of the amounts of dust generated in the spent sand-reclamation process and the post-process determinations of the ignition losses and granular structures of the removed dust, the proper work parameters of the experimental reclaimer were selected. The allowable value of the ignition losses as well as the main fraction of the reclaimed matrix being similar to fresh sand was assumed as the main criteria of the positive assessment of the process. Within the presented investigations, a periodically operating device for rotor-mechanical reclamation was developed. The possibility of changing the intensity and time of the reclamation treatment as well as the triboelectric system of the dust-amount measuring were applied in this device. Tests were performed for the spent moulding sand with phenol-resol resin Carbophen 5692 hardened by CO2. This sand represents the moulding sand group with a less harmful influence on the surroundings for which the recovery of the quartz matrix utilising the reclamation requires stricter control of the parameters of the reclamation process and reclaim quality.
Przejdź do artykułu

Bibliografia

[1] Boenisch, D. (1991, March). Reclamation of spent sands containing bentonite. Guidelines for an economical leading to minimized waste. Giesserei 77, nr 19, 1990. In and AFS International Sand Reclamation Conference, Conference Proceedings, Novi/MI (p. 211).
[2] Dańko, J., Dańko, R., Łucarz, M. (2007). Processes and devices for the matrix regeneration of spent molding sands. Akapit. 291. (in Polish).
[3] Dańko, R. (2007). Development of energetic model for dry mechanical reclamation process of used foundry sands. International Journal of Cast Metals Research. 20(4), 228-232.
[4] Dańko, R. (2012). Strength model of self-setting moulding sands with synthetic resins in an aspect of the of the integrated matrix recycling process. Gliwice: Archives of Foundry Engineering.
[5] Łucarz, M. & Dereń, M. (2017). Conditions of thermal reclamation process realization on a sample of spent moulding sand from an aluminum alloy foundry plant. Archives of Foundry Engineering. 17(2), 197-201.
[6] Leidel, D. S. (1993). Low temperature sand reclamation for dramatically improved quality and reduced cost. Transactions-Japan Foundrymen’s Society. 12, 1-1.
[7] Lewandowski, L. (1997). Materials for foundry molds. Akapit. (in Polish).
[8] Siddique, R., Kaur, G. & Rajor, A. (2010). Waste foundry sand and its leachate characteristics. Resources, Conservation and Recycling. 54(12), 1027-1036.
[9] Svidro, J.T. (2010). The effect of sulphur content in chemical bonded sand moulds on the mechanism of penetration. International Foundry Research. 62(4), 32-41.
[10] Polzin, H., Nitsch, U., Tilch, W. & Flemming, E. (1997). Regenerierung anorganisch gebundener Altsande mit einer mechanisch arbeitender Pilotanlage. Giesserei-Praxis. 23, 500-507.
[11] Vijayakumar, S., Srinivasan, M.V. & Govindaraju, M. (2021). Reduction of waste in furan molding process from cast iron foundry. Materials Today: Proceedings. 46, 5032-5035.
[12] Wang, J.N. & Fan, Z.T. (2010). 'Freezing–mechanical'reclamation of used sodium silicate sands. International Journal of Cast Metals Research. 23(5), 257-263.
[13] Wang, L.C., Jiang, W.M., Gong, X.L., Liu, F.C. & Fan, Z.T. (2019). Recycling water glass from wet reclamation sewage of waste sodium silicate-bonded sand. China Foundry. 16(3), 198-203.
[14] Cruz, N., Briens, C. & Berruti, F. (2009). Green sand reclamation using a fluidized bed with an attrition nozzle. Resources, Conservation and Recycling. 54(1), 45-52.
[15] Dungan, R.S., Huwe, J. & Chaney, R.L. (2009). Concentrations of PCDD/PCDFs and PCBs in spent foundry sands. Chemosphere. 75(9), 1232-1235.
[16] Zitian, F., Fuchu, L., Wei, L. & Guona, L. (2014). A new low-cost method of reclaiming mixed foundry waste sand based on wet-thermal composite reclamation. China Foundry. 11(5).
[17] Ghormley, S., Williams, R. & Dvorak, B. (2020). Foundry Sand Source Reduction Options: Life Cycle Assessment Evaluation. Environments. 7(9), 66.
[18] Holtzer, M. & Kmita, A. (2020). Mold and Core Sands in Metalcasting: Chemistry and Ecology. Sustainable Development. Springer, Cham.

Przejdź do artykułu

Autorzy i Afiliacje

R. Dańko
1
A. Pietrzak
1
D. Gruszka
1

  1. AGH University of Science and Technology, Department of Foundry, ul. Reymonta 23, 30-059 Kraków, Poland
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The results of investigations of plasticity of moulding sands with binders obtained by measuring deflection angles in the single point bend test in dependence on their hardening degree are presented in the hereby paper. Shaped samples made of moulding sands obtained in the technology with urea-furfuryl resin Furanol FR75A and in the technology with water glass, were subjected to various tests. Shaped samples were made on the quartz matrix of a medium grains size ����=0,29 ����. Investigations were performed for the resin content being 1% and 2%, at a constant proportion of a hardener versus resin -- equal 60%. In the case of sands from the technology with water glass, investigations were performed for 3.5% of water glass versus sand matrix and 0.35% of Flodur. Plasticity tests were carried out with using the strength machine with a continuous recording of a sample deflection value. Measurements of deflection angles values in the bend test were performed on a series of simultaneously made samples at constant time intervals from the moment of their making. To determine the sand hardening degree the ultrasound technique was applied, according to the previously developed methodology [1]. Every time from the obtained results the characteristic of the growing stress as a function of deflection was prepared (��). In addition, for the tested group of moulding sands, empirical relationships between the maximum deflection angle (αmax) in the bend test and the hardening degree were determined (Sx): α = f(Sx).
Przejdź do artykułu

Bibliografia

[1] Zych, J. (2002). New, nondestructive method of quality inspection of mould’s elements made of moulding sands with chemical binders. Archives of Foundry. 2(5), 132-139.
[2] Fredrickson, A.G. (1964). Principles and applications of rheology. New York: Prentice Hall, Englewood Cliffs.
[3] Reiner M. (1958). Theoretical rheology. Warszawa: PWN. (in Polish).
[4] Kembłowski, Z. (1973). Rheometry of non-Newtonian fluids. Warszawa: WNT. (in Polish).
[5] Malkin, A. JU. (1994). Rheology Fundamentals. ChemTec Publishing. Canada.
[6] Barnes, H.A. (1997). Thixotropy-a review. Journal of Non-Newtonian Fluid Mechanics. 70(1-2), 1-33.
[7] Gröning, P. (2014). Properties and use of the modern PUR cold-box system. 4th Conference: Molding and core materials - theory and practice. 28 -30 August. Iława – Poland: Hüttenes-Albertus Poland. (in Polish).
[8] Gröning, P., Schreckenberg, S. & Jenrich, K. (2015). Herstellung von hoch-komplexen Zylinderkurbel-gehäusen. Giesserei. 102(01), 42-47.
[9] Grabarczyk, A., Dobosz, M.St., Kusiński, J., & Major-Gabryś, K. (2018). The tendency of moulding sands to generate core cracs. Archives of Foundry Engineering. 18(1), 157-161.
[10] Dobosz, M.St., Grabarczyk, A. & Major-Gabryś, K. (2017). Elasticity of moulding sands – a method of reducing core cracking. Archives of Foundry Engineering. 17(1), 31-36.
[11] Grabarczyk, A. (2018). Analysis and evaluation of mechanical and thermal deformation of molding sands with selected binders. Unpublished doctoral dissertation, AGH University of Science and Technology, Kraków. (in Polish).
[12] Zych, J. (2007). Synthesis of ultrasonic technique applications in the analysis of the kinetics of selected processes in molding materials. Kraków: AGH Uczelniane Wydawnictwa Naukowo-Dydaktyczne. Seria: Rozprawy i Monografie nr 163. (in Polish).

Przejdź do artykułu

Autorzy i Afiliacje

Natalia Matonis
ORCID: ORCID
J. Zych
1
ORCID: ORCID

  1. AGH University of Science and Technology, Faculty of Foundry Engineering, ul. Reymonta 23, 30-059 Cracow, Poland
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

Iron aluminides are iron-aluminum alloys that have excellent resistance to oxidation at high temperatures with low density, high resistance/weight ratio and a low manufacturing cost. Due to its characteristics, these alloys are presented as an option to replace stainless steels in certain applications. This works intends report the casting process and subsequent analyses involving microstructure, mechanical properties, and corrosion resistance of two Fe-Al-C alloys (Fe-11wt%Al and Fe-25wt%Al, containing 0.31-0.37%C), which were prepared in an induction furnace and poured in a permanent mold. Samples of these alloys were characterized and presented elevated hardness values of 37 HRC (alloy Fe-11wt%Al) and 49.6HRC (alloy Fe-25wt%Al) and microstructure with aluminides type Fe3Al and FeAl and also carbides type K. The Fe-11wt%Al alloy exhibited superior resistance to uniform corrosion, although both Fe-Al-C alloys exhibited significantly higher corrosion rates compared to a binary iron aluminide in 0.5M H2SO4 containing naturally dissolved oxygen.
Przejdź do artykułu

Bibliografia

[1] Zamanzade, M., Barnoush, A. & Motz, C. (2016). A review on the properties of iron aluminide intermetallics. Crystals. 6(10), 1-29. DOI: 10.3390/cryst6010010.
[2] Stoloff, N.S. (1998). Iron aluminides: present status and future prospects. Materials Science and Engineering: A. 258(1-2), 1-14. DOI: 10.1016/S0921-5093(98)00909-5.
[3] Cinca, N., Lima, C.R.C. & Guilemany, J.M. (2013). An overview of intermetallics research and application: Status of thermal spray coatings. Journal of Materials Research and Technology. 2(1), 75-86. DOI: 10.1016/j.jmrt.2013.03.013.
[4] Palm, M., Stein, F. & Dehm, G. (2019). Iron Aluminides. Annual Review of Materials Research. 49, 297-326. DOI: 10.1146/annurev-matsci-070218-125911.
[5] Deevi, S.C. & Sikka, V.K. (1996). Nickel and iron aluminides: an overview on properties, processing, and applications. Intermetallics. 4(5) 357-375. DOI: 10.1016/0966-9795(95)00056-9.
[6] Shankar Rao, V., Baligidad, R. G. & Raja, V. S. (2002). Effect of carbon on corrosion behaviour of Fe3Al intermetallics in 0.5N sulphuric acid. Corrosion Science. 44, 521-533. DOI: 10.1016/S0010-938X(01)00084-1.
[7] Shankar Rao, V. (2005). Repassivation behaviour and surface analysis of Fe3Al based iron aluminide in 0.25M H2SO4. Corrosion Science. 47, 183-194. DOI: 10.1016/j.corsci.2004.05.014.
[8] Nigam, A.K., Balasubramaniam, R., Bhargava, S. & Baligidad, R.G. (2006). Electrochemical impedance spectroscopy and cyclic voltammetry study of carbon-alloyed iron aluminides in sulfuric acid. Corrosion Science. 48(7), 1666-1678. DOI: 10.1016/j.corsci.2010.05.006.
[9] Schneider, A., Falat, L., Sauthoff, G. & Frommeyer, G. (2005). Microstructures and mechanical properties of Fe3Al-based Fe-Al-C alloys. Intermetallics. 13(12), 1322-1331. DOI: 10.1016/j.intermet.2005.01.0.
[10] Brito, P., Pinto, H., Klaus, M., Genzel, C. & Kaysser-Pyzalla, A. (2010). Internal stresses and textures of nanostructured alumina scales growing on polycrystalline Fe3Al alloy. Powder Diffraction. 25(2), 114-118. DOI: 10.1154/1.3402764
[11] Brito, P., Schuller, E., Silva, J., Campos, T.R., Araújo, C.R. & Carneiro, J.R. (2017). Electrochemical corrosion behaviour of (100), (110) and (111) Fe3Al single crystals in sulphuric acid. Corrosion Science. 126, 366-373. DOI: 10.1016/j.corsci.2017.05.029.
[12] Brito, P.P., Carvalho Filho, C.T. & Oliveira, G.A. (2020). Electrochemical corrosion behavior of iron aluminides in sulfuric acid. Materials Science Forum. 1012, 395-400. DOI: 10.4028/www.scientific.net/MSF.1012.395.
[13] Hernández-Hernández, M., Liu, H. B., Alvarez-Ramirez, J. & Espinosa-Medina, M. A. (2017). Corrosion behavior of Fe-40at.%Al-Based intermetallic in 0.25M H2SO4 solution. Journal of Materials Engineering and Performance. 26, 5983-5996. DOI: 10.1007/s11665-017-3036-5.

Przejdź do artykułu

Autorzy i Afiliacje

A.P. Silva
1
ORCID: ORCID
P.P. Brito
1
N. Martins
1

  1. PUC Minas, Brazil
Pobierz PDF Pobierz RIS Pobierz Bibtex

Abstrakt

The aim of the research was to determine the effect of the primary quality of reclaim from dry mechanical reclamation on the strength properties and service life of moulding sands based on this reclaim. Another aim was to establish the effect of the quality of reclaim, sulphur content - in particular, on the surface quality and thickness of the deformed surface layer in ductile iron castings. The research has revealed differences in the strength parameters and service life (mouldability) of sands based on the tested reclaims, depending on the type of the furfuryl resin used, including resins whose synthesis was done as part of the Żywfur project. Examinations of the structure of the surface layer of test castings poured in moulds made of loose self-hardening sands containing the addition of reclaim have confirmed the occurrence of degenerated spheroidal graphite in this part of the casting. It should be noted here that when massive castings with a long solidification time are made, the graphite degeneration effect can be more visible and the layer with the changed structure can increase in thickness. The research has clearly shown that it is necessary to control the parameters of the reclaim, including sulphur content which is transferred from the hardener and accumulates on the grains. This phenomenon has a negative impact not only on the sand strength and technological properties but also on the surface layer of castings.
Przejdź do artykułu

Bibliografia

[1] Lewandowski, J.L. (1997). Materials for foundry moulds. Kraków: WN Akapit. ISBN: 83-7108-21-2 (in Polish).
[2] Kamińska, J., Puzio, S., Angrecki, M., Stachowicz, M. & Łoś, A. (2019). Preliminary tests of innovative eco-friendly furfuryl resins and foundry sand mixtures based on these resins. Journal of Ecological Engineering. 20(9), 285-292, DOI: 10.12911/22998993/112510.
[3] Acharya, S.G., Vadher, J.A. & Kanjariya, P.V. (2016). Identification and quantification of gases releasing from furan no bake binder. Archives of Foundry Engineering. 16(3), 5-10. DOI: 10.1515/afe-2016-0039.
[4] Chate, G.R., Patel, GC M., Deshpande, A.S. & Parappagoudar, M.B. (2018). Modeling and optimization of furan moulding sand system using design of experiments and particle swarm optimization. Journal of Process Mechanical Engineering. 232(5), 1-20. DOI: 10.1177/0954408917728636.
[5] Sappinen, T., Orkas, J. & Konqvist, T. (2018). Thermal Reclamation of Foundry Sands Using Repurposed Sand Dryer Equipment. Archives of Foundry Engineering. 18(4), 99-102. DOI: 10.24425/afe.2018.125176.
[6] Kamińska, J., Puzio, S., Angrecki, M. & Łoś, A. (2020). Effect of reclaim addition on the mechanical and technological properties of moulding sands based on pro-ecological furfuryl resin. Archives of Metallurgy and Materials. 65(4), 1425-1429. DOI: 10.24425/amm.2020.133709.
[7] Yan-lei, L., Guo-hua, W., Wen-cai, L., An-tao, C., Liang, Z. & Ying-xin Wang, W. (2017). Effect of reclaimed sand additions on mechanical properties and fracture behavior of furan no-bake resin sand. China Foundry. 14(2), 128-137. DOI: 10.1007/s41230-017-6024-3.
[8] Holtzer, M., Dańko, R., Kmita, A., Drożyński, D., Kubecki, M., Skrzyński, M. & Roczniak, A. (2020). Environmental impact of the reclaimed sand addition to moulding sand with furan and phenol-formaldehyde resin—A comparison, Materials. 13(19), 4395; DOI: https://doi.org/10.3390/ma13194395.
[9] Holtzer, M., Dańko, R. & Kmita, A. (2016). Influence of a reclaimed sand addition to moulding sand with furan resin on its impact on the environment. Water Air and Soil Pollution. 227(16), 1-12. DOI: 10.1007/s11270-015-2707-9.
[10] Hosadyna, M. (2012). The effect of sulphur contained in self-hardening moulding sands on the structure of surface layer in ductile iron castings. Doctoral dissertation, Kraków. (in Polish).
[11] Holtzer, M., Zych, J. & Retel, K. (1996). The effect of mould-liquid cast iron interaction on the surface quality of castings. Przegląd Odlewnictwa. 6(1996), 129-134. (in Polish).
[12] Riposan, I., Chisamera, M., Stan, S., Skaland, T. (2008). Surface graphite degeneration in ductile iron castings for resin molds. Tsinghua Science and Technology. 13(2), 157-163.
[13] Linke, T., Sluis, J.R. (1993). The influence of coatings on the graphite structure in the rim-zone of ductile iron castings. 60th World Foundry Congress, The Netherlands
[14] Hosadyna, M., Dobosz, St.M. & Jelinek, P. (2009). The diffusion of sulphur from moulding sand to cast and methods of its elimination. Archives of Foundry Engineering. 9(4), 73-76.
[15] Sheladiya, M.V., Acharya, S.G., Mehta, K., Acharya, G.D. (2019). Evaluate sulphur diffusion at mould-metal interface in no-bake mould system. Archives of Foundry Engineering. 19(1), 63-70. DOI: 10.24425/afe.2018.125193.
[16] Anca, D., Stan, I., Chisamera, M., Riposan, I. & Stan, S. (2021). Experimental study regarding the possibility of blocking the diffusion of sulfur at casting-mold interface in ductile iron castings. Coatings. 11(673), 1-10. DOI: https://doi.org/10.3390/coatings11060673.
[17] Dańko, J., Dańko, R. & Łucarz, M. (2007). Processes and devices for the matrix regeneration of spent molding sands. Kraków: WN Akapit. ISBN: 978-83-89541-88-8 (in Polish).
[18] Holtzer, M., Bobrowski, A., Drożyński, D., Isendorf, B., Mazur, (2012). Influence of the reclaim on the properties of moulding sands with furfuryl resin applied for moulds for manganese steel castings. Archives of Foundry Engineering. 12(1), 57-62.
[19] Dańko, R., Górny, M., Holtzer, M., Żymankowska-Kumon, S. (2014). Effect of the quality of furan moulding sand on the skin layer of ductile iron castings. ISIJ International. 54(6), 1288-1293. DOI: https://doi.org/10.2355/isijinternational.54.1288.
[20] Pałyga, Ł., Stachowicz, M., Granat, K. (2015). Evaluation of 2D and 3D surface roughness of die castings from alloy AlSi9Cu3. Archives of Foundry Engineering. 15(1), 75-80.

Przejdź do artykułu

Autorzy i Afiliacje

J. Kamińska
1
ORCID: ORCID
M. Angrecki
1
ORCID: ORCID
S. Puzio
1
ORCID: ORCID
M. Stachowicz
2
ORCID: ORCID

  1. Łukasiewicz Research Network – Krakow Institute of Technology, Poland
  2. Wroclaw University of Technology, Faculty of Mechanical Engineering, Poland

Instrukcja dla autorów

Submission


To submit the article, please use the Editorial System provided here:

https://www.editorialsystem.com/afe


Papers submitted in any other way will not be accepted.



The Journal does not have submission charges.


The APC Article Processing Charge is 110 euros (500zł for Polish authors). In some cases, the APC is paid as a part of the scientific conference fee, for which the AFE journal is a supportive one. If not, it is payable after the acceptance of the final article by direct money transfer.


Bank account details:


Account holder: Stowarzyszenie Wychowankow Politechniki Slaskiej Kolo Odlewnikow
Account holder address: ul. Towarowa 7, 44-100 Gliwice, Poland
Account numbers: BIC BPKOPLPW IBAN PL17 1020 2401 0000 0202 0183 3748


Instructions for the preparation of an Archives of Foundry Engineering Paper

Zasady etyki publikacyjnej


Publication Ethics Policy

The standards of expected ethical behavior for all parties involved in publishing in the Archives of Foundry Engineering journal: the author, the journal editor and editorial board, the peer reviewers and the publisher are listed below.

All the articles submitted for publication in Archives of Foundry Engineering are peer reviewed for authenticity, ethical issues and usefulness as per Review Procedure document.

Duties of Editors
1. Monitoring the ethical standards: Editorial Board monitors the ethical standards of the submitted manuscripts and takes all possible measures against any publication malpractices.
2. Fair play: Submitted manuscripts are evaluated for their scientific content without regard to race, gender, sexual orientation, religious beliefs, citizenship, political ideology or any other issues that is a personal or human right.
3. Publication decisions: The Editor in Chief is responsible for deciding which of the submitted articles should or should not be published. The decision to accept or reject the article is based on its importance, originality, clarity, and its relevance to the scope of the journal and is made after the review process.
4. Confidentiality: The Editor in Chief and the members of the Editorial Board t ensure that all materials submitted to the journal remain confidential during the review process. They must not disclose any information about a submitted manuscript to anyone other than the parties involved in the publishing process i.e., authors, reviewers, potential reviewers, other editorial advisers, and the publisher.
5. Disclosure and conflict of interest: Unpublished materials disclosed in the submitted manuscript must not be used by the Editor and the Editorial Board in their own research without written consent of authors. Editors always precludes business needs from compromising intellectual and ethical standards.
6. Maintain the integrity of the academic record: The editors will guard the integrity of the published academic record by issuing corrections and retractions when needed and pursuing suspected or alleged research and publication misconduct. Plagiarism and fraudulent data is not acceptable. Editorial Board always be willing to publish corrections, clarifications, retractions and apologies when needed.

Retractions of the articles: the Editor in Chief will consider retracting a publication if:
- there are clear evidences that the findings are unreliable, either as a result of misconduct (e.g. data fabrication) or honest error (e.g. miscalculation or experimental error)
- the findings have previously been published elsewhere without proper cross-referencing, permission or justification (cases of redundant publication)
- it constitutes plagiarism or reports unethical research.
Notice of the retraction will be linked to the retracted article (by including the title and authors in the retraction heading), clearly identifies the retracted article and state who is retracting the article. Retraction notices should always mention the reason(s) for retraction to distinguish honest error from misconduct.
Retracted articles will not be removed from printed copies of the journal nor from electronic archives but their retracted status will be indicated as clearly as possible.

Duties of Authors
1. Reporting standards: Authors of original research should present an accurate account of the work performed as well as an objective discussion of its significance. Underlying data should be represented accurately in the paper. The paper should contain sufficient details and references to permit others to replicate the work. The fabrication of results and making of fraudulent or inaccurate statements constitute unethical behavior and will cause rejection or retraction of a manuscript or a published article.
2. Originality and plagiarism: Authors should ensure that they have written entirely original works, and if the authors have used the work and/or words of others they need to be cited or quoted. Plagiarism and fraudulent data is not acceptable.
3. Data access retention: Authors may be asked to provide the raw data for editorial review, should be prepared to provide public access to such data, and should be prepared to retain such data for a reasonable time after publication of their paper.
4. Multiple or concurrent publication: Authors should not in general publish a manuscript describing essentially the same research in more than one journal. Submitting the same manuscript to more than one journal concurrently constitutes unethical publishing behavior and is unacceptable.
5. Authorship of the manuscript: Authorship should be limited to those who have made a significant contribution to the conception, design, execution, or interpretation of the report study. All those who have made contributions should be listed as co-authors. The corresponding author should ensure that all appropriate co-authors and no inappropriate co-authors are included in the paper, and that all co-authors have seen and approved the final version of the paper and have agreed to its submission for publication.
6. Acknowledgement of sources: The proper acknowledgment of the work of others must always be given. The authors should cite publications that have been influential in determining the scope of the reported work.
7. Fundamental errors in published works: When the author discovers a significant error or inaccuracy in his/her own published work, it is the author’s obligation to promptly notify the journal editor or publisher and cooperate with the editor to retract or correct the paper.

Duties of Reviewers
1. Contribution to editorial decisions: Peer reviews assist the editor in making editorial decisions and may also help authors to improve their manuscript.
2. Promptness: Any selected reviewer who feels unqualified to review the research reported in a manuscript or knows that its timely review will be impossible should notify the editor and excuse himself/herself from the review process.
3. Confidentiality: All manuscript received for review must be treated as confidential documents. They must not be shown to or discussed with others except those authorized by the editor.
4. Standards of objectivity: Reviews should be conducted objectively. Personal criticism of the author is inappropriate. Reviewers should express their views clearly with appropriate supporting arguments.
5. Acknowledgement of sources: Reviewers should identify the relevant published work that has not been cited by authors. Any substantial similarity or overlap between the manuscript under consideration and any other published paper should be reported to the editor.
6. Disclosure and conflict of Interest: Privileged information or ideas obtained through peer review must be kept confidential and not used for personal advantage. Reviewers should not consider evaluating manuscripts in which they have conflicts of interest resulting from competitive, collaborative, or other relations with any of the authors, companies, or institutions involved in writing a paper.

Procedura recenzowania


Review Procedure


The Review Procedure for articles submitted to the Archives of Foundry Engineering agrees with the recommendations of the Ministry of Science and Higher Education published in a booklet: ‘Dobre praktyki w procedurach recenzyjnych w nauce’ (MNiSW, Dobre praktyki w procedurach recenzyjnych w nauce, Warszawa 2011).

Papers submitted to the Editorial System are primarily screened by editors with respect to scope, formal issues and used template. Texts with obvious errors (formatting other than requested, missing references, evidently low scientific quality) will be rejected at this stage or will be sent for the adjustments.

Once verified each article is checked by the anti-plagiarism system Cross Check powered by iThenticate®. After the positive response, the article is moved into: Initially verified manuscripts. When the similarity level is too high, the article will be rejected. There is no strict rule (i.e., percentage of the similarity), and it is always subject to the Editor’s decision.
Initially verified manuscripts are then sent to at least four independent referees outside the author’s institution and at least two of them outside of Poland, who:

have no conflict of interests with the author,
are not in professional relationships with the author,
are competent in a given discipline and have at least a doctorate degree and respective
scientific achievements,
have a good reputation as reviewers.


The review form is available online at the Journal’s Editorial System and contains the following sections:

1. Article number and title in the Editorial System

2. The statement of the Reviewer (to choose the right options):

I declare that I have not guessed the identity of the Author. I declare that I have guessed the identity of the Author, but there is no conflict of interest

3. Detailed evaluation of the manuscript against other researches published to this point:

Do you think that the paper title corresponds with its contents?
Yes No
Do you think that the abstract expresses the paper contents well?
Yes No
Are the results or methods presented in the paper novel?
Yes No
Do the author(s) state clearly what they have achieved?
Yes No
Do you find the terminology employed proper?
Yes No
Do you find the bibliography representative and up-to-date?
Yes No
Do you find all necessary illustrations and tables?
Yes No
Do you think that the paper will be of interest to the journal readers?
Yes No

4. Reviewer conclusion

Accept without changes
Accept after changes suggested by reviewer.
Rate manuscript once again after major changes and another review
Reject


5. Information for Editors (not visible for authors).

6. Information for Authors


Reviewing is carried out in the double blind process (authors and reviewers do not know each other’s names).

The appointed reviewers obtain summary of the text and it is his/her decision upon accepting/rejecting the paper for review within a given time period 21 days.

The reviewers are obliged to keep opinions about the paper confidential and to not use knowledge about it before publication.

The reviewers send their review to the Archives of Foundry Engineering by Editorial System. The review is archived in the system.

Editors do not accept reviews, which do not conform to merit and formal rules of scientific reviewing like short positive or negative remarks not supported by a close scrutiny or definitely critical reviews with positive final conclusion. The reviewer’s remarks are sent to the author. He/she has to consider all remarks and revise the text accordingly.

The author of the text has the right to comment on the conclusions in case he/she does not agree with them. He/she can request the article withdrawal at any step of the article processing.

The Editor-in-Chief (supported by members of the Editorial Board) decides on publication based on remarks and conclusions presented by the reviewers, author’s comments and the final version of the manuscript.

The final Editor’s decision can be as follows:
Accept without changes
Reject


The rules for acceptance or rejection of the paper and the review form are available on the Web page of the AFE publisher.

Once a year Editorial Office publishes present list of cooperating reviewers.
Reviewing is free of charge.
All articles, including those rejected and withdrawn, are archived in the Editorial System.

Recenzenci

List of Reviewers 2022

Shailee Acharya - S. V. I. T Vasad, India
Vivek Ayar - Birla Vishvakarma Mahavidyalaya Vallabh Vidyanagar, India
Mohammad Azadi - Semnan University, Iran
Azwinur Azwinur - Politeknik Negeri Lhokseumawe, Indonesia
Czesław Baron - Silesian University of Technology, Gliwice, Poland
Dariusz Bartocha - Silesian University of Technology, Gliwice, Poland
Iwona Bednarczyk - Silesian University of Technology, Gliwice, Poland
Artur Bobrowski - AGH University of Science and Technology, Kraków
Poland Łukasz Bohdal - Koszalin University of Technology, Koszalin Poland
Danka Bolibruchova - University of Zilina, Slovak Republic
Joanna Borowiecka-Jamrozek- The Kielce University of Technology, Poland
Debashish Bose - Metso Outotec India Private Limited, Vadodara, India
Andriy Burbelko - AGH University of Science and Technology, Kraków
Poland Ganesh Chate - KLS Gogte Institute of Technology, India
Murat Çolak - Bayburt University, Turkey
Adam Cwudziński - Politechnika Częstochowska, Częstochowa, Poland
Derya Dispinar- Istanbul Technical University, Turkey
Rafał Dojka - ODLEWNIA RAFAMET Sp. z o. o., Kuźnia Raciborska, Poland
Anna Dolata - Silesian University of Technology, Gliwice, Poland
Tomasz Dyl - Gdynia Maritime University, Gdynia, Poland
Maciej Dyzia - Silesian University of Technology, Gliwice, Poland
Eray Erzi - Istanbul University, Turkey
Flora Faleschini - University of Padova, Italy
Imre Felde - Obuda University, Hungary
Róbert Findorák - Technical University of Košice, Slovak Republic
Aldona Garbacz-Klempka - AGH University of Science and Technology, Kraków, Poland
Katarzyna Gawdzińska - Maritime University of Szczecin, Poland
Marek Góral - Rzeszow University of Technology, Poland
Barbara Grzegorczyk - Silesian University of Technology, Gliwice, Poland
Grzegorz Gumienny - Technical University of Lodz, Poland
Ozen Gursoy - University of Padova, Italy
Gábor Gyarmati - University of Miskolc, Hungary
Jakub Hajkowski - Poznan University of Technology, Poland
Marek Hawryluk - Wroclaw University of Science and Technology, Poland
Aleš Herman - Czech Technical University in Prague, Czech Republic
Mariusz Holtzer - AGH University of Science and Technology, Kraków, Poland
Małgorzata Hosadyna-Kondracka - Łukasiewicz Research Network - Krakow Institute of Technology, Poland
Dario Iljkić - University of Rijeka, Croatia
Magdalena Jabłońska - Silesian University of Technology, Gliwice, Poland
Nalepa Jakub - Silesian University of Technology, Gliwice, Poland
Jarosław Jakubski - AGH University of Science and Technology, Kraków, Poland
Aneta Jakubus - Akademia im. Jakuba z Paradyża w Gorzowie Wielkopolskim, Poland
Łukasz Jamrozowicz - AGH University of Science and Technology, Kraków, Poland
Krzysztof Janerka - Silesian University of Technology, Gliwice, Poland
Karolina Kaczmarska - AGH University of Science and Technology, Kraków, Poland
Jadwiga Kamińska - Łukasiewicz Research Network – Krakow Institute of Technology, Poland
Justyna Kasinska - Kielce University Technology, Poland
Magdalena Kawalec - AGH University of Science and Technology, Kraków, Poland
Gholamreza Khalaj - Islamic Azad University, Saveh Branch, Iran
Angelika Kmita - AGH University of Science and Technology, Kraków, Poland
Marcin Kondracki - Silesian University of Technology, Gliwice Poland
Vitaliy Korendiy - Lviv Polytechnic National University, Lviv, Ukraine
Aleksandra Kozłowska - Silesian University of Technology, Gliwice, Poland
Ivana Kroupová - VSB - Technical University of Ostrava, Czech Republic
Malgorzata Lagiewka - Politechnika Czestochowska, Częstochowa, Poland
Janusz Lelito - AGH University of Science and Technology, Kraków, Poland
Jingkun Li - University of Science and Technology Beijing, China
Petr Lichy - Technical University Ostrava, Czech Republic
Y.C. Lin - Central South University, China
Mariusz Łucarz - AGH University of Science and Technology, Kraków, Poland
Ewa Majchrzak - Silesian University of Technology, Gliwice, Poland
Barnali Maji - NIT-Durgapur: National Institute of Technology, Durgapur, India
Pawel Malinowski - AGH University of Science and Technology, Kraków, Poland
Marek Matejka - University of Zilina, Slovak Republic
Bohdan Mochnacki - Technical University of Occupational Safety Management, Katowice, Poland
Grzegorz Moskal - Silesian University of Technology, Poland
Kostiantyn Mykhalenkov - National Academy of Science of Ukraine, Ukraine
Dawid Myszka - Silesian University of Technology, Gliwice, Poland
Maciej Nadolski - Czestochowa University of Technology, Poland
Krzysztof Naplocha - Wrocław University of Science and Technology, Poland
Daniel Nowak - Wrocław University of Science and Technology, Poland
Tomáš Obzina - VSB - Technical University of Ostrava, Czech Republic
Peiman Omranian Mohammadi - Shahid Bahonar University of Kerman, Iran
Zenon Opiekun - Politechnika Rzeszowska, Rzeszów, Poland
Onur Özbek - Duzce University, Turkey
Richard Pastirčák - University of Žilina, Slovak Republic
Miroslawa Pawlyta - Silesian University of Technology, Gliwice, Poland
Jacek Pezda - ATH Bielsko-Biała, Poland
Bogdan Piekarski - Zachodniopomorski Uniwersytet Technologiczny, Szczecin, Poland
Jacek Pieprzyca - Silesian University of Technology, Gliwice, Poland
Bogusław Pisarek - Politechnika Łódzka, Poland
Marcela Pokusová - Slovak Technical University in Bratislava, Slovak Republic
Hartmut Polzin - TU Bergakademie Freiberg, Germany
Cezary Rapiejko - Lodz University of Technology, Poland
Arron Rimmer - ADI Treatments, Doranda Way, West Bromwich, West Midlands, United Kingdom
Jaromír Roučka - Brno University of Technology, Czech Republic
Charnnarong Saikaew - Khon Kaen University Thailand Amit Sata - MEFGI, Faculty of Engineering, India
Mariola Saternus - Silesian University of Technology, Gliwice, Poland
Vasudev Shinde - DKTE' s Textile and Engineering India Robert Sika - Politechnika Poznańska, Poznań, Poland
Bozo Smoljan - University North Croatia, Croatia
Leszek Sowa - Politechnika Częstochowska, Częstochowa, Poland
Sławomir Spadło - Kielce University of Technology, Poland
Mateusz Stachowicz - Wroclaw University of Technology, Poland
Marcin Stawarz - Silesian University of Technology, Gliwice, Poland
Grzegorz Stradomski - Czestochowa University of Technology, Poland
Roland Suba - Schaeffler Skalica, spol. s r.o., Slovak Republic
Maciej Sułowski - AGH University of Science and Technology, Kraków, Poland
Jan Szajnar - Silesian University of Technology, Gliwice, Poland
Michal Szucki - TU Bergakademie Freiberg, Germany
Tomasz Szymczak - Lodz University of Technology, Poland
Damian Słota - Silesian University of Technology, Gliwice, Poland
Grzegorz Tęcza - AGH University of Science and Technology, Kraków, Poland
Marek Tkocz - Silesian University of Technology, Gliwice, Poland
Andrzej Trytek - Rzeszow University of Technology, Poland
Mirosław Tupaj - Rzeszow University of Technology, Poland
Robert B Tuttle - Western Michigan University United States Seyed Ebrahim Vahdat - Ayatollah Amoli Branch, Islamic Azad University, Amol, Iran
Iveta Vaskova - Technical University of Kosice, Slovak Republic
Dorota Wilk-Kołodziejczyk - AGH University of Science and Technology, Kraków, Poland
Ryszard Władysiak - Lodz University of Technology, Poland
Çağlar Yüksel - Atatürk University, Turkey
Renata Zapała - AGH University of Science and Technology, Kraków, Poland
Jerzy Zych - AGH University of Science and Technology, Kraków, Poland
Andrzej Zyska - Czestochowa University of Technology, Poland



List of Reviewers 2021

Czesław Baron - Silesian University of Technology, Gliwice, Poland
Imam Basori - State University of Jakarta, Indonesia
Leszek Blacha - Silesian University of Technology, Gliwice
Poland Artur Bobrowski - AGH University of Science and Technology, Kraków, Poland
Danka Bolibruchova - University of Zilina, Slovak Republic
Pedro Brito - Pontifical Catholic University of Minas Gerais, Brazil
Marek Bruna - University of Zilina, Slovak Republic
Marcin Brzeziński - AGH University of Science and Technology, Kraków, Poland
Andriy Burbelko - AGH University of Science and Technology, Kraków, Poland
Alexandros Charitos - TU Bergakademie Freiberg, Germany
Ganesh Chate - KLS Gogte Institute of Technology, India
L.Q. Chen - Northeastern University, China
Zhipei Chen - University of Technology, Netherlands
Józef Dańko - AGH University of Science and Technology, Kraków, Poland
Brij Dhindaw - Indian Institute of Technology Bhubaneswar, India
Derya Dispinar - Istanbul Technical University, Turkey
Rafał Dojka - ODLEWNIA RAFAMET Sp. z o. o., Kuźnia Raciborska, Poland
Anna Dolata - Silesian University of Technology, Gliwice, Poland
Agnieszka Dulska - Silesian University of Technology, Gliwice, Poland
Maciej Dyzia - Silesian University of Technology, Poland
Eray Erzi - Istanbul University, Turkey
Przemysław Fima - Institute of Metallurgy and Materials Science PAN, Kraków, Poland
Aldona Garbacz-Klempka - AGH University of Science and Technology, Kraków, Poland
Dipak Ghosh - Forace Polymers P Ltd., India
Beata Grabowska - AGH University of Science and Technology, Kraków, Poland
Adam Grajcar - Silesian University of Technology, Gliwice, Poland
Grzegorz Gumienny - Technical University of Lodz, Poland
Gábor Gyarmati - Foundry Institute, University of Miskolc, Hungary
Krzysztof Herbuś - Silesian University of Technology, Gliwice, Poland
Aleš Herman - Czech Technical University in Prague, Czech Republic
Mariusz Holtzer - AGH University of Science and Technology, Kraków, Poland
Małgorzata Hosadyna-Kondracka - Łukasiewicz Research Network - Krakow Institute of Technology, Kraków, Poland
Jarosław Jakubski - AGH University of Science and Technology, Kraków, Poland
Krzysztof Janerka - Silesian University of Technology, Gliwice, Poland
Robert Jasionowski - Maritime University of Szczecin, Poland
Agata Jażdżewska - Gdansk University of Technology, Poland
Jan Jezierski - Silesian University of Technology, Gliwice, Poland
Karolina Kaczmarska - AGH University of Science and Technology, Kraków, Poland
Jadwiga Kamińska - Centre of Casting Technology, Łukasiewicz Research Network – Krakow Institute of Technology, Poland
Adrian Kampa - Silesian University of Technology, Gliwice, Poland
Wojciech Kapturkiewicz- AGH University of Science and Technology, Kraków, Poland
Tatiana Karkoszka - Silesian University of Technology, Gliwice, Poland
Gholamreza Khalaj - Islamic Azad University, Saveh Branch, Iran
Himanshu Khandelwal - National Institute of Foundry & Forging Technology, Hatia, Ranchi, India
Angelika Kmita - AGH University of Science and Technology, Kraków, Poland
Grzegorz Kokot - Silesian University of Technology, Gliwice, Poland
Ladislav Kolařík - CTU in Prague, Czech Republic
Marcin Kondracki - Silesian University of Technology, Gliwice, Poland
Dariusz Kopyciński - AGH University of Science and Technology, Kraków, Poland
Janusz Kozana - AGH University of Science and Technology, Kraków, Poland
Tomasz Kozieł - AGH University of Science and Technology, Kraków, Poland
Aleksandra Kozłowska - Silesian University of Technology, Gliwice Poland
Halina Krawiec - AGH University of Science and Technology, Kraków, Poland
Ivana Kroupová - VSB - Technical University of Ostrava, Czech Republic
Wacław Kuś - Silesian University of Technology, Gliwice, Poland
Jacques Lacaze - University of Toulouse, France
Avinash Lakshmikanthan - Nitte Meenakshi Institute of Technology, India
Jaime Lazaro-Nebreda - Brunel Centre for Advanced Solidification Technology, Brunel University London, United Kingdom
Janusz Lelito - AGH University of Science and Technology, Kraków, Poland
Tomasz Lipiński - University of Warmia and Mazury in Olsztyn, Poland
Mariusz Łucarz - AGH University of Science and Technology, Kraków, Poland
Maria Maj - AGH University of Science and Technology, Kraków, Poland
Jerzy Mendakiewicz - Silesian University of Technology, Gliwice, Poland
Hanna Myalska-Głowacka - Silesian University of Technology, Gliwice, Poland
Kostiantyn Mykhalenkov - Physics-Technological Institute of Metals and Alloys, National Academy of Science of Ukraine, Ukraine
Dawid Myszka - Politechnika Warszawska, Warszawa, Poland
Maciej Nadolski - Czestochowa University of Technology, Poland
Daniel Nowak - Wrocław University of Science and Technology, Poland
Mitsuhiro Okayasu - Okayama University, Japan
Agung Pambudi - Sebelas Maret University in Indonesia, Indonesia
Richard Pastirčák - University of Žilina, Slovak Republic
Bogdan Piekarski - Zachodniopomorski Uniwersytet Technologiczny, Szczecin, Poland
Bogusław Pisarek - Politechnika Łódzka, Poland
Seyda Polat - Kocaeli University, Turkey
Hartmut Polzin - TU Bergakademie Freiberg, Germany
Alena Pribulova - Technical University of Košice, Slovak Republic
Cezary Rapiejko - Lodz University of Technology, Poland
Arron Rimmer - ADI Treatments, Doranda Way, West Bromwich West Midlands, United Kingdom
Iulian Riposan - Politehnica University of Bucharest, Romania
Ferdynand Romankiewicz - Uniwersytet Zielonogórski, Zielona Góra, Poland
Mario Rosso - Politecnico di Torino, Italy
Jaromír Roučka - Brno University of Technology, Czech Republic
Charnnarong Saikaew - Khon Kaen University, Thailand
Mariola Saternus - Silesian University of Technology, Gliwice, Poland
Karthik Shankar - Amrita Vishwa Vidyapeetham , Amritapuri, India
Vasudev Shinde - Shivaji University, Kolhapur, Rajwada, Ichalkaranji, India
Robert Sika - Politechnika Poznańska, Poznań, Poland
Jerzy Sobczak - AGH University of Science and Technology, Kraków, Poland
Sebastian Sobula - AGH University of Science and Technology, Kraków, Poland
Marek Soiński - Akademia im. Jakuba z Paradyża w Gorzowie Wielkopolskim, Poland
Mateusz Stachowicz - Wroclaw University of Technology, Poland
Marcin Stawarz - Silesian University of Technology, Gliwice, Poland
Andrzej Studnicki - Silesian University of Technology, Gliwice, Poland
Mayur Sutaria - Charotar University of Science and Technology, CHARUSAT, Gujarat, India
Maciej Sułowski - AGH University of Science and Technology, Kraków, Poland
Sutiyoko Sutiyoko - Manufacturing Polytechnic of Ceper, Klaten, Indonesia
Tomasz Szymczak - Lodz University of Technology, Poland
Marek Tkocz - Silesian University of Technology, Gliwice, Poland
Andrzej Trytek - Rzeszow University of Technology, Poland
Jacek Trzaska - Silesian University of Technology, Gliwice, Poland
Robert B Tuttle - Western Michigan University, United States
Muhammet Uludag - Selcuk University, Turkey
Seyed Ebrahim Vahdat - Ayatollah Amoli Branch, Islamic Azad University, Amol, Iran
Tomasz Wrobel - Silesian University of Technology, Gliwice, Poland
Ryszard Władysiak - Lodz University of Technology, Poland
Antonin Zadera - Brno University of Technology, Czech Republic
Renata Zapała - AGH University of Science and Technology, Kraków, Poland
Bo Zhang - Hunan University of Technology, China
Xiang Zhang - Wuhan University of Science and Technology, China
Eugeniusz Ziółkowski - AGH University of Science and Technology, Kraków, Poland
Sylwia Żymankowska-Kumon - AGH University of Science and Technology, Kraków, Poland
Andrzej Zyska - Czestochowa University of Technology, Poland



List of Reviewers 2020

Shailee Acharya - S. V. I. T Vasad, India
Mohammad Azadi - Semnan University, Iran
Rafał Babilas - Silesian University of Technology, Gliwice, Poland
Czesław Baron - Silesian University of Technology, Gliwice, Poland
Dariusz Bartocha - Silesian University of Technology, Gliwice, Poland
Emin Bayraktar - Supmeca/LISMMA-Paris, France
Jaroslav Beňo - VSB-Technical University of Ostrava, Czech Republic
Artur Bobrowski - AGH University of Science and Technology, Kraków, Poland
Grzegorz Boczkal - AGH University of Science and Technology, Kraków, Poland
Wojciech Borek - Silesian University of Technology, Gliwice, Poland
Pedro Brito - Pontifical Catholic University of Minas Gerais, Brazil
Marek Bruna - University of Žilina, Slovak Republic
John Campbell - University of Birmingham, United Kingdom
Ganesh Chate - Gogte Institute of Technology, India
L.Q. Chen - Northeastern University, China
Mirosław Cholewa - Silesian University of Technology, Gliwice, Poland
Khanh Dang - Hanoi University of Science and Technology, Viet Nam
Vladislav Deev - Wuhan Textile University, China
Brij Dhindaw - Indian Institute of Technology Bhubaneswar, India
Derya Dispinar - Istanbul Technical University, Turkey
Malwina Dojka - Silesian University of Technology, Gliwice, Poland
Rafał Dojka - ODLEWNIA RAFAMET Sp. z o. o., Kuźnia Raciborska, Poland
Anna Dolata - Silesian University of Technology, Gliwice, Poland
Agnieszka Dulska - Silesian University of Technology, Gliwice, Poland
Tomasz Dyl - Gdynia Maritime University, Poland
Maciej Dyzia - Silesian University of Technology, Gliwice, Poland
Eray Erzi - Istanbul University, Turkey
Katarzyna Gawdzińska - Maritime University of Szczecin, Poland
Sergii Gerasin - Pryazovskyi State Technical University, Ukraine
Dipak Ghosh - Forace Polymers Ltd, India
Marcin Górny - AGH University of Science and Technology, Kraków, Poland
Marcin Gołąbczak - Lodz University of Technology, Poland
Beata Grabowska - AGH University of Science and Technology, Kraków, Poland
Adam Grajcar - Silesian University of Technology, Gliwice, Poland
Grzegorz Gumienny - Technical University of Lodz, Poland
Libor Hlavac - VSB Ostrava, Czech Republic
Mariusz Holtzer - AGH University of Science and Technology, Kraków, Poland
Philippe Jacquet - ECAM, Lyon, France
Jarosław Jakubski - AGH University of Science and Technology, Kraków, Poland
Damian Janicki - Silesian University of Technology, Gliwice, Poland
Witold Janik - Silesian University of Technology, Gliwice, Poland
Robert Jasionowski - Maritime University of Szczecin, Poland
Jan Jezierski - Silesian University of Technology, Gliwice, Poland
Jadwiga Kamińska - Łukasiewicz Research Network – Krakow Institute of Technology, Poland
Justyna Kasinska - Kielce University Technology, Poland
Magdalena Kawalec - Akademia Górniczo-Hutnicza, Kraków, Poland
Angelika Kmita - AGH University of Science and Technology, Kraków, Poland
Ladislav Kolařík -Institute of Engineering Technology CTU in Prague, Czech Republic
Marcin Kondracki - Silesian University of Technology, Gliwice, Poland
Sergey Konovalov - Samara National Research University, Russia
Aleksandra Kozłowska - Silesian University of Technology, Gliwice, Poland
Janusz Krawczyk - AGH University of Science and Technology, Kraków, Poland
Halina Krawiec - AGH University of Science and Technology, Kraków, Poland
Ivana Kroupová - VSB - Technical University of Ostrava, Czech Republic
Agnieszka Kupiec-Sobczak - Cracow University of Technology, Poland
Tomasz Lipiński - University of Warmia and Mazury in Olsztyn, Poland
Aleksander Lisiecki - Silesian University of Technology, Gliwice, Poland
Krzysztof Lukaszkowicz - Silesian University of Technology, Gliwice, Poland
Mariusz Łucarz - AGH University of Science and Technology, Kraków, Poland
Katarzyna Major-Gabryś - AGH University of Science and Technology, Kraków, Poland
Pavlo Maruschak - Ternopil Ivan Pului National Technical University, Ukraine
Sanjay Mohan - Shri Mata Vaishno Devi University, India
Marek Mróz - Politechnika Rzeszowska, Rzeszów, Poland
Sebastian Mróz - Czestochowa University of Technology, Poland
Kostiantyn Mykhalenkov - National Academy of Science of Ukraine, Ukraine
Dawid Myszka - Politechnika Warszawska, Warszawa, Poland
Maciej Nadolski - Czestochowa University of Technology, Częstochowa, Poland
Konstantin Nikitin - Samara State Technical University, Russia
Daniel Pakuła - Silesian University of Technology, Gliwice, Poland


Ta strona wykorzystuje pliki 'cookies'. Więcej informacji